From: Tim Harvey tharvey@gateworks.com
Add support for determining host vs peripheral mode for IMX8MM and IMX8MN configured as OTG.
Signed-off-by: Tim Harvey tharvey@gateworks.com Signed-off-by: Fabio Estevam festevam@denx.de --- drivers/usb/host/ehci-mx6.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/usb/host/ehci-mx6.c b/drivers/usb/host/ehci-mx6.c index ff23a5e35e64..de53f0c15204 100644 --- a/drivers/usb/host/ehci-mx6.c +++ b/drivers/usb/host/ehci-mx6.c @@ -523,7 +523,7 @@ static int ehci_usb_phy_mode(struct udevice *dev) plat->init_type = USB_INIT_DEVICE; else plat->init_type = USB_INIT_HOST; - } else if (is_mx7()) { + } else if (is_mx7() || is_imx8mm() || is_imx8mn()) { phy_status = (void __iomem *)(addr + USBNC_PHY_STATUS_OFFSET); val = readl(phy_status);