[PATCH 12/24] arm: Remove configs/T1023RDB_NAND_defconfig board

This board has not been converted to CONFIG_DM_SPI by the deadline.

Remove it.

Signed-off-by: Jagan Teki jagan@amarulasolutions.com --- arch/powerpc/cpu/mpc85xx/Kconfig | 1 - board/freescale/t102xrdb/Kconfig | 14 - board/freescale/t102xrdb/MAINTAINERS | 15 - board/freescale/t102xrdb/Makefile | 17 - board/freescale/t102xrdb/README | 340 --------- board/freescale/t102xrdb/cpld.c | 102 --- board/freescale/t102xrdb/cpld.h | 48 -- board/freescale/t102xrdb/ddr.c | 257 ------- board/freescale/t102xrdb/eth_t102xrdb.c | 146 ---- board/freescale/t102xrdb/law.c | 31 - board/freescale/t102xrdb/pci.c | 25 - board/freescale/t102xrdb/spl.c | 143 ---- board/freescale/t102xrdb/t1023_nand_rcw.cfg | 8 - board/freescale/t102xrdb/t1023_sd_rcw.cfg | 8 - board/freescale/t102xrdb/t1023_spi_rcw.cfg | 8 - board/freescale/t102xrdb/t1024_nand_rcw.cfg | 8 - board/freescale/t102xrdb/t1024_pbi.cfg | 26 - board/freescale/t102xrdb/t1024_sd_rcw.cfg | 8 - board/freescale/t102xrdb/t1024_spi_rcw.cfg | 8 - board/freescale/t102xrdb/t102xrdb.c | 394 ----------- board/freescale/t102xrdb/t102xrdb.h | 15 - board/freescale/t102xrdb/tlb.c | 116 ---- configs/T1023RDB_NAND_defconfig | 77 --- configs/T1023RDB_SDCARD_defconfig | 74 -- configs/T1023RDB_SECURE_BOOT_defconfig | 64 -- configs/T1023RDB_SPIFLASH_defconfig | 77 --- configs/T1023RDB_defconfig | 61 -- configs/T1024RDB_NAND_defconfig | 86 --- configs/T1024RDB_SDCARD_defconfig | 83 --- configs/T1024RDB_SECURE_BOOT_defconfig | 66 -- configs/T1024RDB_SPIFLASH_defconfig | 86 --- configs/T1024RDB_defconfig | 71 -- include/configs/T102xRDB.h | 721 -------------------- 33 files changed, 3204 deletions(-) delete mode 100644 board/freescale/t102xrdb/Kconfig delete mode 100644 board/freescale/t102xrdb/MAINTAINERS delete mode 100644 board/freescale/t102xrdb/Makefile delete mode 100644 board/freescale/t102xrdb/README delete mode 100644 board/freescale/t102xrdb/cpld.c delete mode 100644 board/freescale/t102xrdb/cpld.h delete mode 100644 board/freescale/t102xrdb/ddr.c delete mode 100644 board/freescale/t102xrdb/eth_t102xrdb.c delete mode 100644 board/freescale/t102xrdb/law.c delete mode 100644 board/freescale/t102xrdb/pci.c delete mode 100644 board/freescale/t102xrdb/spl.c delete mode 100644 board/freescale/t102xrdb/t1023_nand_rcw.cfg delete mode 100644 board/freescale/t102xrdb/t1023_sd_rcw.cfg delete mode 100644 board/freescale/t102xrdb/t1023_spi_rcw.cfg delete mode 100644 board/freescale/t102xrdb/t1024_nand_rcw.cfg delete mode 100644 board/freescale/t102xrdb/t1024_pbi.cfg delete mode 100644 board/freescale/t102xrdb/t1024_sd_rcw.cfg delete mode 100644 board/freescale/t102xrdb/t1024_spi_rcw.cfg delete mode 100644 board/freescale/t102xrdb/t102xrdb.c delete mode 100644 board/freescale/t102xrdb/t102xrdb.h delete mode 100644 board/freescale/t102xrdb/tlb.c delete mode 100644 configs/T1023RDB_NAND_defconfig delete mode 100644 configs/T1023RDB_SDCARD_defconfig delete mode 100644 configs/T1023RDB_SECURE_BOOT_defconfig delete mode 100644 configs/T1023RDB_SPIFLASH_defconfig delete mode 100644 configs/T1023RDB_defconfig delete mode 100644 configs/T1024RDB_NAND_defconfig delete mode 100644 configs/T1024RDB_SDCARD_defconfig delete mode 100644 configs/T1024RDB_SECURE_BOOT_defconfig delete mode 100644 configs/T1024RDB_SPIFLASH_defconfig delete mode 100644 configs/T1024RDB_defconfig delete mode 100644 include/configs/T102xRDB.h

diff --git a/arch/powerpc/cpu/mpc85xx/Kconfig b/arch/powerpc/cpu/mpc85xx/Kconfig index 1511691974..deffa831dc 100644 --- a/arch/powerpc/cpu/mpc85xx/Kconfig +++ b/arch/powerpc/cpu/mpc85xx/Kconfig @@ -1600,7 +1600,6 @@ source "board/freescale/p1023rdb/Kconfig" source "board/freescale/p1_twr/Kconfig" source "board/freescale/qemu-ppce500/Kconfig" source "board/freescale/t102xqds/Kconfig" -source "board/freescale/t102xrdb/Kconfig" source "board/freescale/t1040qds/Kconfig" source "board/freescale/t104xrdb/Kconfig" source "board/freescale/t208xqds/Kconfig" diff --git a/board/freescale/t102xrdb/Kconfig b/board/freescale/t102xrdb/Kconfig deleted file mode 100644 index 6deeb248a3..0000000000 --- a/board/freescale/t102xrdb/Kconfig +++ /dev/null @@ -1,14 +0,0 @@ -if TARGET_T1023RDB || TARGET_T1024RDB - -config SYS_BOARD - default "t102xrdb" - -config SYS_VENDOR - default "freescale" - -config SYS_CONFIG_NAME - default "T102xRDB" - -source "board/freescale/common/Kconfig" - -endif diff --git a/board/freescale/t102xrdb/MAINTAINERS b/board/freescale/t102xrdb/MAINTAINERS deleted file mode 100644 index 6c24f7785c..0000000000 --- a/board/freescale/t102xrdb/MAINTAINERS +++ /dev/null @@ -1,15 +0,0 @@ -T102XRDB BOARD -#M: Shengzhou Liu Shengzhou.Liu@freescale.com -S: Orphan (since 2018-05) -F: board/freescale/t102xrdb/ -F: include/configs/T102xRDB.h -F: configs/T1024RDB_defconfig -F: configs/T1024RDB_NAND_defconfig -F: configs/T1024RDB_SDCARD_defconfig -F: configs/T1024RDB_SPIFLASH_defconfig -F: configs/T1024RDB_SECURE_BOOT_defconfig -F: configs/T1023RDB_defconfig -F: configs/T1023RDB_NAND_defconfig -F: configs/T1023RDB_SDCARD_defconfig -F: configs/T1023RDB_SPIFLASH_defconfig -F: configs/T1023RDB_SECURE_BOOT_defconfig diff --git a/board/freescale/t102xrdb/Makefile b/board/freescale/t102xrdb/Makefile deleted file mode 100644 index ddeb44f36e..0000000000 --- a/board/freescale/t102xrdb/Makefile +++ /dev/null @@ -1,17 +0,0 @@ -# -# Copyright 2014 Freescale Semiconductor, Inc. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -ifdef CONFIG_SPL_BUILD -obj-y += spl.o -else -obj-y += t102xrdb.o -obj-$(CONFIG_TARGET_T1024RDB) += cpld.o -obj-y += eth_t102xrdb.o -obj-$(CONFIG_PCI) += pci.o -endif -obj-y += ddr.o -obj-y += law.o -obj-y += tlb.o diff --git a/board/freescale/t102xrdb/README b/board/freescale/t102xrdb/README deleted file mode 100644 index dde3f8ca37..0000000000 --- a/board/freescale/t102xrdb/README +++ /dev/null @@ -1,340 +0,0 @@ -T1024 SoC Overview ------------------- -The T1024/T1023 dual core and T1014/T1013 single core QorIQ communication processor -combines two or one 64-bit Power Architecture e5500 core respectively with high -performance datapath acceleration logic, and network peripheral bus interfaces -required for networking and telecommunications. This processor can be used in -applications such as enterprise WLAN access points, routers, switches, firewall -and other packet processing intensive small enterprise and branch office appliances, -and general-purpose embedded computing. Its high level of integration offers -significant performance benefits and greatly helps to simplify board design. - - -The T1024 SoC includes the following function and features: -- two e5500 cores, each with a private 256 KB L2 cache - - Up to 1.4 GHz with 64-bit ISA support (Power Architecture v2.06-compliant) - - Three levels of instructions: User, supervisor, and hypervisor - - Independent boot and reset - - Secure boot capability -- 256 KB shared L3 CoreNet platform cache (CPC) -- Interconnect CoreNet platform - - CoreNet coherency manager supporting coherent and noncoherent transactions - with prioritization and bandwidth allocation amongst CoreNet endpoints - - 150 Gbps coherent read bandwidth -- 32-/64-bit DDR3L/DDR4 SDRAM memory controller with ECC and interleaving support -- Data Path Acceleration Architecture (DPAA) incorporating acceleration for the following functions: - - Packet parsing, classification, and distribution - - Queue management for scheduling, packet sequencing, and congestion management - - Cryptography Acceleration (SEC 5.x) - - IEEE 1588 support - - Hardware buffer management for buffer allocation and deallocation - - MACSEC on DPAA-based Ethernet ports -- Ethernet interfaces - - Four 1 Gbps Ethernet controllers -- Parallel Ethernet interfaces - - Two RGMII interfaces -- High speed peripheral interfaces - - Three PCI Express 2.0 controllers/ports running at up to 5 GHz - - One SATA controller supporting 1.5 and 3.0 Gb/s operation - - One QSGMII interface - - Four SGMII interface supporting 1000 Mbps - - Three SGMII interfaces supporting up to 2500 Mbps - - 10GbE XFI or 10Base-KR interface -- Additional peripheral interfaces - - Two USB 2.0 controllers with integrated PHY - - SD/eSDHC/eMMC - - eSPI controller - - Four I2C controllers - - Four UARTs - - Four GPIO controllers - - Integrated flash controller (IFC) - - LCD interface (DIU) with 12 bit dual data rate -- Multicore programmable interrupt controller (PIC) -- Two 8-channel DMA engines -- Single source clocking implementation -- Deep Sleep power implementaion (wakeup from GPIO/Timer/Ethernet/USB) -- QUICC Engine block - - 32-bit RISC controller for flexible support of the communications peripherals - - Serial DMA channel for receive and transmit on all serial channels - - Two universal communication controllers, supporting TDM, HDLC, and UART - -T1023 Personality ------------------- -T1023 is a reduced personality of T1024 without QUICC Engine, DIU, and -unavailable deep sleep. Rest of the blocks are almost same as T1024. -Differences between T1024 and T1023 -Feature T1024 T1023 -QUICC Engine: yes no -DIU: yes no -Deep Sleep: yes no -I2C controller: 4 3 -DDR: 64-bit 32-bit -IFC: 32-bit 28-bit -Package: 23x23 19x19 - - -T1024RDB board Overview ------------------------ - - Ethernet - - Two on-board 10M/100M/1G bps RGMII ethernet ports - - One on-board 10G bps Base-T port. - - DDR Memory - - Supports 64-bit 4GB DDR3L DIMM - - PCIe - - One on-board PCIe slot. - - Two on-board PCIe Mini-PCIe connectors. - - IFC/Local Bus - - NOR: 128MB 16-bit NOR Flash - - NAND: 1GB 8-bit NAND flash - - CPLD: for system controlling with programable header on-board - - USB - - Supports two USB 2.0 ports with integrated PHYs - - Two type A ports with 5V@1.5A per port. - - SDHC - - one SD connector supporting 1.8V/3.3V via J53. - - SPI - - On-board 64MB SPI flash - - Other - - Two Serial ports - - Four I2C ports - - -T1023RDB board Overview ------------------------ -- T1023 SoC integrating two 64-bit e5500 cores up to 1.4GHz -- CoreNet fabric supporting coherent and noncoherent transactions with - prioritization and bandwidth allocation -- SDRAM memory: 2GB Micron MT40A512M8HX unbuffered 32-bit DDR4 w/o ECC -- Accelerator: DPAA components consist of FMan, BMan, QMan, DCE and SEC -- Ethernet interfaces: - - one 1G RGMII port on-board(RTL8211FS PHY) - - one 1G SGMII port on-board(RTL8211FS PHY) - - one 2.5G SGMII port on-board(AQR105 PHY) -- PCIe: Two Mini-PCIe connectors on-board. -- SerDes: 4 lanes up to 10.3125GHz -- NOR: 128MB S29GL01GS110TFIV10 Spansion NOR Flash -- NAND: 512MB S34MS04G200BFI000 Spansion NAND Flash -- eSPI: 64MB S25FL512SAGMFI010 Spansion SPI flash. -- USB: one Type-A USB 2.0 port with internal PHY -- eSDHC: support SD/MMC and eMMC card -- 256Kbit M24256 I2C EEPROM -- RTC: Real-time clock DS1339U on I2C bus -- UART: one serial port on-board with RJ45 connector -- Debugging: JTAG/COP for T1023 debugging - - -Memory map on T1024RDB ----------------------- -Start Address End Address Description Size -0xF_FFDF_0000 0xF_FFDF_0FFF IFC - CPLD 4KB -0xF_FF80_0000 0xF_FF80_FFFF IFC - NAND Flash 64KB -0xF_FE00_0000 0xF_FEFF_FFFF CCSRBAR 16MB -0xF_F802_0000 0xF_F802_FFFF PCI Express 3 I/O Space 64KB -0xF_F801_0000 0xF_F801_FFFF PCI Express 2 I/O Space 64KB -0xF_F800_0000 0xF_F800_FFFF PCI Express 1 I/O Space 64KB -0xF_F600_0000 0xF_F7FF_FFFF Queue manager software portal 32MB -0xF_F400_0000 0xF_F5FF_FFFF Buffer manager software portal 32MB -0xF_E800_0000 0xF_EFFF_FFFF IFC - NOR Flash 128MB -0xF_0000_0000 0xF_003F_FFFF DCSR 4MB -0xC_2000_0000 0xC_2FFF_FFFF PCI Express 3 Mem Space 256MB -0xC_1000_0000 0xC_1FFF_FFFF PCI Express 2 Mem Space 256MB -0xC_0000_0000 0xC_0FFF_FFFF PCI Express 1 Mem Space 256MB -0x0_0000_0000 0x0_ffff_ffff DDR 4GB - - -128MB NOR Flash Memory Layout ------------------------------ -Start Address End Address Definition Max size -0xEFF40000 0xEFFFFFFF U-Boot (current bank) 768KB -0xEFF20000 0xEFF3FFFF U-Boot env (current bank) 128KB -0xEFF00000 0xEFF1FFFF FMAN Ucode (current bank) 128KB -0xEFE00000 0xEFE3FFFF QE firmware (current bank) 256KB -0xED300000 0xEFDFFFFF rootfs (alt bank) 44MB -0xED000000 0xED2FFFFF Guest image #3 (alternate bank) 3MB -0xECD00000 0xECFFFFFF Guest image #2 (alternate bank) 3MB -0xECA00000 0xECCFFFFF Guest image #1 (alternate bank) 3MB -0xEC900000 0xEC9FFFFF HV config device tree(alt bank) 1MB -0xEC800000 0xEC8FFFFF Hardware device tree (alt bank) 1MB -0xEC700000 0xEC7FFFFF HV.uImage (alternate bank) 1MB -0xEC020000 0xEC6FFFFF Linux.uImage (alt bank) ~7MB -0xEC000000 0xEC01FFFF RCW (alt bank) 128KB -0xEBF40000 0xEBFFFFFF U-Boot (alt bank) 768KB -0xEBF20000 0xEBF3FFFF U-Boot env (alt bank) 128KB -0xEBF00000 0xEBF1FFFF FMAN ucode (alt bank) 128KB -0xEBE00000 0xEBE3FFFF QE firmware (alt bank) 256KB -0xE9300000 0xEBDFFFFF rootfs (current bank) 44MB -0xE9000000 0xE92FFFFF Guest image #3 (current bank) 3MB -0xE8D00000 0xE8FFFFFF Guest image #2 (current bank) 3MB -0xE8A00000 0xE8CFFFFF Guest image #1 (current bank) 3MB -0xE8900000 0xE89FFFFF HV config device tree(cur bank) 1MB -0xE8800000 0xE88FFFFF Hardware device tree (cur bank) 1MB -0xE8700000 0xE87FFFFF HV.uImage (current bank) 1MB -0xE8020000 0xE86FFFFF Linux.uImage (current bank) ~7MB -0xE8000000 0xE801FFFF RCW (current bank) 128KB - - -T1024/T1023 Clock frequency ---------------------------- -BIN Core DDR Platform FMan -Bin1: 1400MHz 1600MT/s 400MHz 700MHz -Bin2: 1200MHz 1600MT/s 400MHz 600MHz -Bin3: 1000MHz 1600MT/s 400MHz 500MHz - - -Software configurations and board settings ------------------------------------------- -1. NOR boot: - a. build NOR boot image - $ make T1024RDB_defconfig - $ make - b. program u-boot.bin image to NOR flash - => tftp 1000000 u-boot.bin - => pro off all;era eff40000 efffffff;cp.b 1000000 eff40000 $filesize - on T1024RDB: - set SW1[1:8] = '00010011', SW2[1] = '1', SW3[4] = '0' for NOR boot - on T1023RDB: - set SW1[1:8] = '00010111', SW2[1] = '1', SW3[4] = '0' for NOR boot - - Switching between default bank0 and alternate bank4 on NOR flash - To change boot source to vbank4: - on T1024RDB: - via software: run command 'cpld reset altbank' in U-Boot. - via DIP-switch: set SW3[5:7] = '100' - on T1023RDB: - via software: run command 'switch bank4' in U-Boot. - via DIP-switch: set SW3[5:7] = '100' - - To change boot source to vbank0: - on T1024RDB: - via software: run command 'cpld reset' in U-Boot. - via DIP-Switch: set SW3[5:7] = '000' - on T1023RDB: - via software: run command 'switch bank0' in U-Boot. - via DIP-switch: set SW3[5:7] = '000' - -2. NAND Boot: - a. build PBL image for NAND boot - $ make T1024RDB_NAND_defconfig - $ make - b. program u-boot-with-spl-pbl.bin to NAND flash - => tftp 1000000 u-boot-with-spl-pbl.bin - => nand erase 0 $filesize - => nand write 1000000 0 $filesize - set SW1[1:8] = '10000010', SW2[1] = '1', SW3[4] = '1' for NAND boot - -3. SPI Boot: - a. build PBL image for SPI boot - $ make T1024RDB_SPIFLASH_defconfig - $ make - b. program u-boot-with-spl-pbl.bin to SPI flash - => tftp 1000000 u-boot-with-spl-pbl.bin - => sf probe 0 - => sf erase 0 100000 - => sf write 1000000 0 $filesize - => tftp 1000000 fsl_fman_ucode_t1024_xx.bin - => sf erase 100000 100000 - => sf write 1000000 110000 20000 - set SW1[1:8] = '00100010', SW2[1] ='1' for SPI boot - -4. SD Boot: - a. build PBL image for SD boot - $ make T1024RDB_SDCARD_defconfig - $ make - b. program u-boot-with-spl-pbl.bin to SD/MMC card - => tftp 1000000 u-boot-with-spl-pbl.bin - => mmc write 1000000 8 0x7f0 - => tftp 1000000 fsl_fman_ucode_t1024_xx.bin - => mmc write 1000000 0x820 80 - set SW1[1:8] = '00100000', SW2[1] = '0' for SD boot - - SW3[3] = '1' for SD card(or 'switch sd' by software) - SW3[3] = '0' for eMMC (or 'switch emmc' by software) - - -device tree support and how to enable it for different configs --------------------------------------------------------------- -device tree support is available for t1024rdb for below mentioned boot, -1. nor boot -2. nand boot -3. sd boot -4. spiflash boot - -to enable device tree support for other boot, below configs need to be -enabled in relative defconfig file, -1. config_default_device_tree="t1024rdb" (change default device tree name if required) -2. config_of_control -3. config_mpc85xx_have_reset_vector if reset vector is located at - config_reset_vector_address - 0xffc - -if device tree support is enabled in defconfig, -1. use 'u-boot-with-dtb.bin' for nor boot. -2. use 'u-boot-with-spl-pbl.bin' for other boot. - -2-stage NAND/SPI/SD boot loader -------------------------------- -PBL initializes the internal CPC-SRAM and copy SPL(160K) to SRAM. -SPL further initializes DDR using SPD and environment variables -and copy U-Boot(768 KB) from NAND/SPI/SD device to DDR. -Finally SPL transers control to U-Boot for futher booting. - -SPL has following features: - - Executes within 256K - - No relocation required - -Run time view of SPL framework -------------------------------------------------- -|Area | Address | -------------------------------------------------- -|SecureBoot header | 0xFFFC0000 (32KB) | -------------------------------------------------- -|GD, BD | 0xFFFC8000 (4KB) | -------------------------------------------------- -|ENV | 0xFFFC9000 (8KB) | -------------------------------------------------- -|HEAP | 0xFFFCB000 (30KB) | -------------------------------------------------- -|STACK | 0xFFFD8000 (22KB) | -------------------------------------------------- -|U-Boot SPL | 0xFFFD8000 (160KB) | -------------------------------------------------- - -NAND Flash memory Map on T1024RDB -------------------------------------------------------------- -Start End Definition Size -0x000000 0x0FFFFF U-Boot 1MB(2 block) -0x100000 0x17FFFF U-Boot env 512KB(1 block) -0x180000 0x1FFFFF FMAN Ucode 512KB(1 block) -0x200000 0x27FFFF QE Firmware 512KB(1 block) - - -NAND Flash memory Map on T1023RDB ----------------------------------------------------- -Start End Definition Size -0x000000 0x0FFFFF U-Boot 1MB -0x100000 0x15FFFF U-Boot env 8KB -0x160000 0x17FFFF FMAN Ucode 128KB - - -SD Card memory Map on T102xRDB ----------------------------------------------------- -Block #blocks Definition Size -0x008 2048 U-Boot img 1MB -0x800 0016 U-Boot env 8KB -0x820 0256 FMAN Ucode 128KB -0x920 0256 QE Firmware 128KB(only T1024RDB) - - -64MB SPI Flash memory Map on T102xRDB ----------------------------------------------------- -Start End Definition Size -0x000000 0x0FFFFF U-Boot img 1MB -0x100000 0x101FFF U-Boot env 8KB -0x110000 0x12FFFF FMAN Ucode 128KB -0x130000 0x14FFFF QE Firmware 128KB(only T1024RDB) -0x300000 0x3FFFFF device tree 128KB -0x400000 0x9FFFFF Linux kernel 6MB -0xa00000 0x3FFFFFF rootfs 54MB - - -For more details, please refer to T1024RDB/T1023RDB User Guide -and Freescale QorIQ SDK Infocenter document. diff --git a/board/freescale/t102xrdb/cpld.c b/board/freescale/t102xrdb/cpld.c deleted file mode 100644 index 47c3b1627e..0000000000 --- a/board/freescale/t102xrdb/cpld.c +++ /dev/null @@ -1,102 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/** - * Copyright 2014 Freescale Semiconductor - * - * Freescale T1024RDB board-specific CPLD controlling supports. - * - * The following macros need to be defined: - */ - -#include <common.h> -#include <command.h> -#include <asm/io.h> -#include "cpld.h" - -u8 cpld_read(unsigned int reg) -{ - void *p = (void *)CONFIG_SYS_CPLD_BASE; - - return in_8(p + reg); -} - -void cpld_write(unsigned int reg, u8 value) -{ - void *p = (void *)CONFIG_SYS_CPLD_BASE; - - out_8(p + reg, value); -} - -/** - * Set the boot bank to the alternate bank - */ -void cpld_set_altbank(void) -{ - u8 reg = CPLD_READ(flash_csr); - - reg = (reg & ~CPLD_BANK_SEL_MASK) | CPLD_LBMAP_ALTBANK; - - CPLD_WRITE(flash_csr, reg); - CPLD_WRITE(reset_ctl1, CPLD_LBMAP_RESET); -} - -/** - * Set the boot bank to the default bank - */ -void cpld_set_defbank(void) -{ - u8 reg = CPLD_READ(flash_csr); - - reg = (reg & ~CPLD_BANK_SEL_MASK) | CPLD_LBMAP_DFLTBANK; - - CPLD_WRITE(flash_csr, reg); - CPLD_WRITE(reset_ctl1, CPLD_LBMAP_RESET); -} - -static void cpld_dump_regs(void) -{ - printf("cpld_ver = 0x%02x\n", CPLD_READ(cpld_ver)); - printf("cpld_ver_sub = 0x%02x\n", CPLD_READ(cpld_ver_sub)); - printf("hw_ver = 0x%02x\n", CPLD_READ(hw_ver)); - printf("sw_ver = 0x%02x\n", CPLD_READ(sw_ver)); - printf("reset_ctl1 = 0x%02x\n", CPLD_READ(reset_ctl1)); - printf("reset_ctl2 = 0x%02x\n", CPLD_READ(reset_ctl2)); - printf("int_status = 0x%02x\n", CPLD_READ(int_status)); - printf("flash_csr = 0x%02x\n", CPLD_READ(flash_csr)); - printf("fan_ctl_status = 0x%02x\n", CPLD_READ(fan_ctl_status)); - printf("led_ctl_status = 0x%02x\n", CPLD_READ(led_ctl_status)); - printf("sfp_ctl_status = 0x%02x\n", CPLD_READ(sfp_ctl_status)); - printf("misc_ctl_status = 0x%02x\n", CPLD_READ(misc_ctl_status)); - printf("boot_override = 0x%02x\n", CPLD_READ(boot_override)); - printf("boot_config1 = 0x%02x\n", CPLD_READ(boot_config1)); - printf("boot_config2 = 0x%02x\n", CPLD_READ(boot_config2)); - putc('\n'); -} - -int do_cpld(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) -{ - int rc = 0; - - if (argc <= 1) - return cmd_usage(cmdtp); - - if (strcmp(argv[1], "reset") == 0) { - if (strcmp(argv[2], "altbank") == 0) - cpld_set_altbank(); - else - cpld_set_defbank(); - } else if (strcmp(argv[1], "dump") == 0) { - cpld_dump_regs(); - } else { - rc = cmd_usage(cmdtp); - } - - return rc; -} - -U_BOOT_CMD( - cpld, CONFIG_SYS_MAXARGS, 1, do_cpld, - "Reset the board or alternate bank", - "reset - hard reset to default bank\n" - "cpld reset altbank - reset to alternate bank\n" - "cpld dump - display the CPLD registers\n" - ); diff --git a/board/freescale/t102xrdb/cpld.h b/board/freescale/t102xrdb/cpld.h deleted file mode 100644 index c05f536806..0000000000 --- a/board/freescale/t102xrdb/cpld.h +++ /dev/null @@ -1,48 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/** - * Copyright 2014 Freescale Semiconductor - * - */ - -struct cpld_data { - u8 cpld_ver; /* 0x00 - CPLD Major Revision Register */ - u8 cpld_ver_sub; /* 0x01 - CPLD Minor Revision Register */ - u8 hw_ver; /* 0x02 - Hardware Revision Register */ - u8 sw_ver; /* 0x03 - Software Revision register */ - u8 res0[12]; /* 0x04 - 0x0F - not used */ - u8 reset_ctl1; /* 0x10 - Reset control Register1 */ - u8 reset_ctl2; /* 0x11 - Reset control Register2 */ - u8 int_status; /* 0x12 - Interrupt status Register */ - u8 flash_csr; /* 0x13 - Flash control and status register */ - u8 fan_ctl_status; /* 0x14 - Fan control and status register */ - u8 led_ctl_status; /* 0x15 - LED control and status register */ - u8 sfp_ctl_status; /* 0x16 - SFP control and status register */ - u8 misc_ctl_status; /* 0x17 - Miscellanies ctrl & status register*/ - u8 boot_override; /* 0x18 - Boot override register */ - u8 boot_config1; /* 0x19 - Boot config override register*/ - u8 boot_config2; /* 0x1A - Boot config override register*/ -} cpld_data_t; - - -/* Pointer to the CPLD register set */ - -u8 cpld_read(unsigned int reg); -void cpld_write(unsigned int reg, u8 value); - -#define CPLD_READ(reg) cpld_read(offsetof(struct cpld_data, reg)) -#define CPLD_WRITE(reg, value)\ - cpld_write(offsetof(struct cpld_data, reg), value) - -/* CPLD on IFC */ -#define CPLD_LBMAP_MASK 0x3F -#define CPLD_BANK_SEL_MASK 0x07 -#define CPLD_BANK_OVERRIDE 0x40 -#define CPLD_LBMAP_ALTBANK 0x44 /* BANK OR | BANK 4 */ -#define CPLD_LBMAP_DFLTBANK 0x40 /* BANK OR | BANK 0 */ -#define CPLD_LBMAP_RESET 0xFF -#define CPLD_LBMAP_SHIFT 0x03 -#define CPLD_BOOT_SEL 0x80 - -#define CPLD_PCIE_SGMII_MUX 0x80 -#define CPLD_OVERRIDE_BOOT_EN 0x01 -#define CPLD_OVERRIDE_MUX_EN 0x02 /* PCIE/2.5G-SGMII mux override enable */ diff --git a/board/freescale/t102xrdb/ddr.c b/board/freescale/t102xrdb/ddr.c deleted file mode 100644 index 3640a47957..0000000000 --- a/board/freescale/t102xrdb/ddr.c +++ /dev/null @@ -1,257 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright 2014 Freescale Semiconductor, Inc. - */ - -#include <common.h> -#include <i2c.h> -#include <hwconfig.h> -#include <init.h> -#include <log.h> -#include <asm/mmu.h> -#include <fsl_ddr_sdram.h> -#include <fsl_ddr_dimm_params.h> -#include <asm/fsl_law.h> -#include <asm/mpc85xx_gpio.h> -#include <linux/delay.h> - -DECLARE_GLOBAL_DATA_PTR; - -struct board_specific_parameters { - u32 n_ranks; - u32 datarate_mhz_high; - u32 rank_gb; - u32 clk_adjust; - u32 wrlvl_start; - u32 wrlvl_ctl_2; - u32 wrlvl_ctl_3; -}; - -/* - * datarate_mhz_high values need to be in ascending order - */ -static const struct board_specific_parameters udimm0[] = { - /* - * memory controller 0 - * num| hi| rank| clk| wrlvl | wrlvl | wrlvl | - * ranks| mhz| GB |adjst| start | ctl2 | ctl3 | - */ - {2, 833, 0, 8, 6, 0x06060607, 0x08080807,}, - {2, 1350, 0, 8, 7, 0x0708080A, 0x0A0B0C09,}, - {2, 1666, 0, 8, 7, 0x0808090B, 0x0C0D0E0A,}, - {1, 833, 0, 8, 6, 0x06060607, 0x08080807,}, - {1, 1350, 0, 8, 7, 0x0708080A, 0x0A0B0C09,}, - {1, 1666, 0, 8, 7, 0x0808090B, 0x0C0D0E0A,}, - {} -}; - -static const struct board_specific_parameters *udimms[] = { - udimm0, -}; - -void fsl_ddr_board_options(memctl_options_t *popts, - dimm_params_t *pdimm, - unsigned int ctrl_num) -{ - const struct board_specific_parameters *pbsp, *pbsp_highest = NULL; - ulong ddr_freq; - struct cpu_type *cpu = gd->arch.cpu; - - if (ctrl_num > 1) { - printf("Not supported controller number %d\n", ctrl_num); - return; - } - if (!pdimm->n_ranks) - return; - - pbsp = udimms[0]; - - /* Get clk_adjust according to the board ddr freqency and n_banks - * specified in board_specific_parameters table. - */ - ddr_freq = get_ddr_freq(0) / 1000000; - while (pbsp->datarate_mhz_high) { - if (pbsp->n_ranks == pdimm->n_ranks && - (pdimm->rank_density >> 30) >= pbsp->rank_gb) { - if (ddr_freq <= pbsp->datarate_mhz_high) { - popts->clk_adjust = pbsp->clk_adjust; - popts->wrlvl_start = pbsp->wrlvl_start; - popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2; - popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3; - goto found; - } - pbsp_highest = pbsp; - } - pbsp++; - } - - if (pbsp_highest) { - printf("Error: board specific timing not found\n"); - printf("for data rate %lu MT/s\n", ddr_freq); - printf("Trying to use the highest speed (%u) parameters\n", - pbsp_highest->datarate_mhz_high); - popts->clk_adjust = pbsp_highest->clk_adjust; - popts->wrlvl_start = pbsp_highest->wrlvl_start; - popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2; - popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3; - } else { - panic("DIMM is not supported by this board"); - } -found: - debug("Found timing match: n_ranks %d, data rate %d, rank_gb %d\n", - pbsp->n_ranks, pbsp->datarate_mhz_high, pbsp->rank_gb); - debug("\tclk_adjust %d, wrlvl_start %d, wrlvl_ctrl_2 0x%x, ", - pbsp->clk_adjust, pbsp->wrlvl_start, pbsp->wrlvl_ctl_2); - debug("wrlvl_ctrl_3 0x%x\n", pbsp->wrlvl_ctl_3); - - /* - * Factors to consider for half-strength driver enable: - * - number of DIMMs installed - */ - popts->half_strength_driver_enable = 0; - /* - * Write leveling override - */ - popts->wrlvl_override = 1; - popts->wrlvl_sample = 0xf; - - /* - * rtt and rtt_wr override - */ - popts->rtt_override = 0; - - /* Enable ZQ calibration */ - popts->zq_en = 1; - - /* DHC_EN =1, ODT = 75 Ohm */ - popts->ddr_cdr1 = DDR_CDR1_DHC_EN | DDR_CDR1_ODT(DDR_CDR_ODT_OFF); - popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_OFF); - - /* T1023 supports max DDR bus 32bit width, T1024 supports DDR 64bit, - * force DDR bus width to 32bit for T1023 - */ - if (cpu->soc_ver == SVR_T1023) - popts->data_bus_width = DDR_DATA_BUS_WIDTH_32; - -#ifdef CONFIG_FORCE_DDR_DATA_BUS_WIDTH_32 - /* for DDR bus 32bit test on T1024 */ - popts->data_bus_width = DDR_DATA_BUS_WIDTH_32; -#endif - -#ifdef CONFIG_TARGET_T1023RDB - popts->wrlvl_ctl_2 = 0x07070606; - popts->half_strength_driver_enable = 1; - popts->cpo_sample = 0x43; -#elif defined(CONFIG_TARGET_T1024RDB) - /* optimize cpo for erratum A-009942 */ - popts->cpo_sample = 0x52; -#endif -} - -#ifdef CONFIG_SYS_DDR_RAW_TIMING -/* 2GB discrete DDR4 MT40A512M8HX on T1023RDB */ -dimm_params_t ddr_raw_timing = { - .n_ranks = 1, - .rank_density = 0x80000000, - .capacity = 0x80000000, - .primary_sdram_width = 32, - .ec_sdram_width = 8, - .registered_dimm = 0, - .mirrored_dimm = 0, - .n_row_addr = 15, - .n_col_addr = 10, - .bank_addr_bits = 2, - .bank_group_bits = 2, - .edc_config = 0, - .burst_lengths_bitmask = 0x0c, - .tckmin_x_ps = 938, - .tckmax_ps = 1500, - .caslat_x = 0x000DFA00, - .taa_ps = 13500, - .trcd_ps = 13500, - .trp_ps = 13500, - .tras_ps = 33000, - .trc_ps = 46500, - .trfc1_ps = 260000, - .trfc2_ps = 160000, - .trfc4_ps = 110000, - .tfaw_ps = 25000, - .trrds_ps = 3700, - .trrdl_ps = 5300, - .tccdl_ps = 5355, - .refresh_rate_ps = 7800000, - .dq_mapping[0] = 0x0, - .dq_mapping[1] = 0x0, - .dq_mapping[2] = 0x0, - .dq_mapping[3] = 0x0, - .dq_mapping[4] = 0x0, - .dq_mapping[5] = 0x0, - .dq_mapping[6] = 0x0, - .dq_mapping[7] = 0x0, - .dq_mapping[8] = 0x0, - .dq_mapping[9] = 0x0, - .dq_mapping[10] = 0x0, - .dq_mapping[11] = 0x0, - .dq_mapping[12] = 0x0, - .dq_mapping[13] = 0x0, - .dq_mapping[14] = 0x0, - .dq_mapping[15] = 0x0, - .dq_mapping[16] = 0x0, - .dq_mapping[17] = 0x0, - .dq_mapping_ors = 1, -}; - -int fsl_ddr_get_dimm_params(dimm_params_t *pdimm, - unsigned int controller_number, - unsigned int dimm_number) -{ - const char dimm_model[] = "Fixed DDR4 on board"; - - if (((controller_number == 0) && (dimm_number == 0)) || - ((controller_number == 1) && (dimm_number == 0))) { - memcpy(pdimm, &ddr_raw_timing, sizeof(dimm_params_t)); - memset(pdimm->mpart, 0, sizeof(pdimm->mpart)); - memcpy(pdimm->mpart, dimm_model, sizeof(dimm_model) - 1); - } - - return 0; -} -#endif - -#if defined(CONFIG_DEEP_SLEEP) -void board_mem_sleep_setup(void) -{ - void __iomem *cpld_base = (void *)CONFIG_SYS_CPLD_BASE; - - /* does not provide HW signals for power management */ - clrbits_8(cpld_base + 0x17, 0x40); - /* Disable MCKE isolation */ - gpio_set_value(2, 0); - udelay(1); -} -#endif - -int dram_init(void) -{ - phys_size_t dram_size; - -#if defined(CONFIG_SPL_BUILD) || !defined(CONFIG_RAMBOOT_PBL) -#ifndef CONFIG_SYS_DDR_RAW_TIMING - puts("Initializing....using SPD\n"); -#endif - dram_size = fsl_ddr_sdram(); -#else - /* DDR has been initialised by first stage boot loader */ - dram_size = fsl_ddr_sdram_size(); -#endif - dram_size = setup_ddr_tlbs(dram_size / 0x100000); - dram_size *= 0x100000; - -#if defined(CONFIG_DEEP_SLEEP) && !defined(CONFIG_SPL_BUILD) - fsl_dp_resume(); -#endif - - gd->ram_size = dram_size; - - return 0; -} diff --git a/board/freescale/t102xrdb/eth_t102xrdb.c b/board/freescale/t102xrdb/eth_t102xrdb.c deleted file mode 100644 index dbf25a237d..0000000000 --- a/board/freescale/t102xrdb/eth_t102xrdb.c +++ /dev/null @@ -1,146 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright 2014 Freescale Semiconductor, Inc. - * - * Shengzhou Liu Shengzhou.Liu@freescale.com - */ - -#include <common.h> -#include <command.h> -#include <fdt_support.h> -#include <net.h> -#include <netdev.h> -#include <asm/mmu.h> -#include <asm/processor.h> -#include <asm/immap_85xx.h> -#include <asm/fsl_law.h> -#include <asm/fsl_serdes.h> -#include <asm/fsl_portals.h> -#include <asm/fsl_liodn.h> -#include <malloc.h> -#include <fm_eth.h> -#include <fsl_mdio.h> -#include <miiphy.h> -#include <phy.h> -#include <fsl_dtsec.h> -#include <asm/fsl_serdes.h> -#include "../common/fman.h" - -int board_eth_init(bd_t *bis) -{ -#if defined(CONFIG_FMAN_ENET) - int i, interface; - struct memac_mdio_info dtsec_mdio_info; - struct memac_mdio_info tgec_mdio_info; - struct mii_dev *dev; - ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - u32 srds_s1; - - srds_s1 = in_be32(&gur->rcwsr[4]) & - FSL_CORENET2_RCWSR4_SRDS1_PRTCL; - srds_s1 >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT; - - dtsec_mdio_info.regs = - (struct memac_mdio_controller *)CONFIG_SYS_FM1_DTSEC_MDIO_ADDR; - - dtsec_mdio_info.name = DEFAULT_FM_MDIO_NAME; - - /* Register the 1G MDIO bus */ - fm_memac_mdio_init(bis, &dtsec_mdio_info); - - tgec_mdio_info.regs = - (struct memac_mdio_controller *)CONFIG_SYS_FM1_TGEC_MDIO_ADDR; - tgec_mdio_info.name = DEFAULT_FM_TGEC_MDIO_NAME; - - /* Register the 10G MDIO bus */ - fm_memac_mdio_init(bis, &tgec_mdio_info); - - /* Set the on-board RGMII PHY address */ - fm_info_set_phy_address(FM1_DTSEC4, RGMII_PHY1_ADDR); - - switch (srds_s1) { -#ifdef CONFIG_TARGET_T1024RDB - case 0x95: - /* set the on-board RGMII2 PHY */ - fm_info_set_phy_address(FM1_DTSEC3, RGMII_PHY2_ADDR); - - /* set 10G XFI with Aquantia AQR105 PHY */ - fm_info_set_phy_address(FM1_10GEC1, FM1_10GEC1_PHY_ADDR); - break; -#endif - case 0x6a: - case 0x6b: - case 0x77: - case 0x135: - /* set the on-board 2.5G SGMII AQR105 PHY */ - fm_info_set_phy_address(FM1_DTSEC3, SGMII_AQR_PHY_ADDR); -#ifdef CONFIG_TARGET_T1023RDB - /* set the on-board 1G SGMII RTL8211F PHY */ - fm_info_set_phy_address(FM1_DTSEC1, SGMII_RTK_PHY_ADDR); -#endif - break; - default: - printf("SerDes protocol 0x%x is not supported on T102xRDB\n", - srds_s1); - break; - } - - for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) { - interface = fm_info_get_enet_if(i); - switch (interface) { - case PHY_INTERFACE_MODE_RGMII: - dev = miiphy_get_dev_by_name(DEFAULT_FM_MDIO_NAME); - fm_info_set_mdio(i, dev); - break; - case PHY_INTERFACE_MODE_SGMII: -#if defined(CONFIG_TARGET_T1023RDB) - dev = miiphy_get_dev_by_name(DEFAULT_FM_MDIO_NAME); -#elif defined(CONFIG_TARGET_T1024RDB) - dev = miiphy_get_dev_by_name(DEFAULT_FM_TGEC_MDIO_NAME); -#endif - fm_info_set_mdio(i, dev); - break; - case PHY_INTERFACE_MODE_SGMII_2500: - dev = miiphy_get_dev_by_name(DEFAULT_FM_TGEC_MDIO_NAME); - fm_info_set_mdio(i, dev); - break; - default: - break; - } - } - - for (i = FM1_10GEC1; i < FM1_10GEC1 + CONFIG_SYS_NUM_FM1_10GEC; i++) { - switch (fm_info_get_enet_if(i)) { - case PHY_INTERFACE_MODE_XGMII: - dev = miiphy_get_dev_by_name(DEFAULT_FM_TGEC_MDIO_NAME); - fm_info_set_mdio(i, dev); - break; - default: - break; - } - } - - cpu_eth_init(bis); -#endif /* CONFIG_FMAN_ENET */ - - return pci_eth_init(bis); -} - -void board_ft_fman_fixup_port(void *fdt, char *compat, phys_addr_t addr, - enum fm_port port, int offset) -{ -#if defined(CONFIG_TARGET_T1024RDB) - if (((fm_info_get_enet_if(port) == PHY_INTERFACE_MODE_SGMII_2500) || - (fm_info_get_enet_if(port) == PHY_INTERFACE_MODE_SGMII)) && - (port == FM1_DTSEC3)) { - fdt_set_phy_handle(fdt, compat, addr, "sg_2500_aqr105_phy4"); - fdt_setprop_string(fdt, offset, "phy-connection-type", - "sgmii-2500"); - fdt_status_disabled_by_alias(fdt, "xg_aqr105_phy3"); - } -#endif -} - -void fdt_fixup_board_enet(void *fdt) -{ -} diff --git a/board/freescale/t102xrdb/law.c b/board/freescale/t102xrdb/law.c deleted file mode 100644 index 04a4239797..0000000000 --- a/board/freescale/t102xrdb/law.c +++ /dev/null @@ -1,31 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright 2014 Freescale Semiconductor, Inc. - */ - -#include <common.h> -#include <asm/fsl_law.h> -#include <asm/mmu.h> - -struct law_entry law_table[] = { -#ifdef CONFIG_MTD_NOR_FLASH - SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_IFC), -#endif -#ifdef CONFIG_SYS_BMAN_MEM_PHYS - SET_LAW(CONFIG_SYS_BMAN_MEM_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_BMAN), -#endif -#ifdef CONFIG_SYS_QMAN_MEM_PHYS - SET_LAW(CONFIG_SYS_QMAN_MEM_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_QMAN), -#endif -#ifdef CONFIG_SYS_CPLD_BASE_PHYS - SET_LAW(CONFIG_SYS_CPLD_BASE_PHYS, LAW_SIZE_4K, LAW_TRGT_IF_IFC), -#endif -#ifdef CONFIG_SYS_DCSRBAR_PHYS - SET_LAW(CONFIG_SYS_DCSRBAR_PHYS, LAW_SIZE_4M, LAW_TRGT_IF_DCSR), -#endif -#ifdef CONFIG_SYS_NAND_BASE_PHYS - SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_IFC), -#endif -}; - -int num_law_entries = ARRAY_SIZE(law_table); diff --git a/board/freescale/t102xrdb/pci.c b/board/freescale/t102xrdb/pci.c deleted file mode 100644 index bd0e29744c..0000000000 --- a/board/freescale/t102xrdb/pci.c +++ /dev/null @@ -1,25 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright 2007-2014 Freescale Semiconductor, Inc. - */ - -#include <common.h> -#include <command.h> -#include <init.h> -#include <pci.h> -#include <asm/fsl_pci.h> -#include <linux/libfdt.h> -#include <fdt_support.h> -#include <asm/fsl_serdes.h> - -#if !defined(CONFIG_DM_PCI) -void pci_init_board(void) -{ - fsl_pcie_init_board(0); -} - -void pci_of_setup(void *blob, bd_t *bd) -{ - FT_FSL_PCI_SETUP; -} -#endif diff --git a/board/freescale/t102xrdb/spl.c b/board/freescale/t102xrdb/spl.c deleted file mode 100644 index aed0721c0d..0000000000 --- a/board/freescale/t102xrdb/spl.c +++ /dev/null @@ -1,143 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* Copyright 2014 Freescale Semiconductor, Inc. - */ - -#include <common.h> -#include <clock_legacy.h> -#include <console.h> -#include <env_internal.h> -#include <init.h> -#include <malloc.h> -#include <ns16550.h> -#include <nand.h> -#include <i2c.h> -#include <mmc.h> -#include <fsl_esdhc.h> -#include <spi_flash.h> -#include "../common/sleep.h" -#include "../common/spl.h" - -DECLARE_GLOBAL_DATA_PTR; - -phys_size_t get_effective_memsize(void) -{ - return CONFIG_SYS_L3_SIZE; -} - -unsigned long get_board_sys_clk(void) -{ - return CONFIG_SYS_CLK_FREQ; -} - -unsigned long get_board_ddr_clk(void) -{ - return CONFIG_DDR_CLK_FREQ; -} - -#if defined(CONFIG_SPL_MMC_BOOT) -#define GPIO1_SD_SEL 0x00020000 -int board_mmc_getcd(struct mmc *mmc) -{ - ccsr_gpio_t __iomem *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR); - u32 val = in_be32(&pgpio->gpdat); - - /* GPIO1_14, 0: eMMC, 1: SD */ - val &= GPIO1_SD_SEL; - - return val ? -1 : 1; -} - -int board_mmc_getwp(struct mmc *mmc) -{ - ccsr_gpio_t __iomem *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR); - u32 val = in_be32(&pgpio->gpdat); - - val &= GPIO1_SD_SEL; - - return val ? -1 : 0; -} -#endif - -void board_init_f(ulong bootflag) -{ - u32 plat_ratio, sys_clk, ccb_clk; - ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; - - /* Memcpy existing GD at CONFIG_SPL_GD_ADDR */ - memcpy((void *)CONFIG_SPL_GD_ADDR, (void *)gd, sizeof(gd_t)); - - /* Update GD pointer */ - gd = (gd_t *)(CONFIG_SPL_GD_ADDR); - - console_init_f(); - -#ifdef CONFIG_DEEP_SLEEP - /* disable the console if boot from deep sleep */ - if (is_warm_boot()) - fsl_dp_disable_console(); -#endif - - /* initialize selected port with appropriate baud rate */ - sys_clk = get_board_sys_clk(); - plat_ratio = (in_be32(&gur->rcwsr[0]) >> 25) & 0x1f; - ccb_clk = sys_clk * plat_ratio / 2; - - NS16550_init((NS16550_t)CONFIG_SYS_NS16550_COM1, - ccb_clk / 16 / CONFIG_BAUDRATE); - -#if defined(CONFIG_SPL_MMC_BOOT) - puts("\nSD boot...\n"); -#elif defined(CONFIG_SPL_SPI_BOOT) - puts("\nSPI boot...\n"); -#elif defined(CONFIG_SPL_NAND_BOOT) - puts("\nNAND boot...\n"); -#endif - - relocate_code(CONFIG_SPL_RELOC_STACK, (gd_t *)CONFIG_SPL_GD_ADDR, 0x0); -} - -void board_init_r(gd_t *gd, ulong dest_addr) -{ - bd_t *bd; - - bd = (bd_t *)(gd + sizeof(gd_t)); - memset(bd, 0, sizeof(bd_t)); - gd->bd = bd; - bd->bi_memstart = CONFIG_SYS_INIT_L3_ADDR; - bd->bi_memsize = CONFIG_SYS_L3_SIZE; - - arch_cpu_init(); - get_clocks(); - mem_malloc_init(CONFIG_SPL_RELOC_MALLOC_ADDR, - CONFIG_SPL_RELOC_MALLOC_SIZE); - gd->flags |= GD_FLG_FULL_MALLOC_INIT; - -#ifdef CONFIG_SPL_NAND_BOOT - nand_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE, - (uchar *)SPL_ENV_ADDR); -#endif -#ifdef CONFIG_SPL_MMC_BOOT - mmc_initialize(bd); - mmc_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE, - (uchar *)SPL_ENV_ADDR); -#endif -#ifdef CONFIG_SPL_SPI_BOOT - fsl_spi_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE, - (uchar *)SPL_ENV_ADDR); -#endif - - gd->env_addr = (ulong)(SPL_ENV_ADDR); - gd->env_valid = ENV_VALID; - - i2c_init_all(); - - dram_init(); - -#ifdef CONFIG_SPL_MMC_BOOT - mmc_boot(); -#elif defined(CONFIG_SPL_SPI_BOOT) - fsl_spi_boot(); -#elif defined(CONFIG_SPL_NAND_BOOT) - nand_boot(); -#endif -} diff --git a/board/freescale/t102xrdb/t1023_nand_rcw.cfg b/board/freescale/t102xrdb/t1023_nand_rcw.cfg deleted file mode 100644 index f8f72826b1..0000000000 --- a/board/freescale/t102xrdb/t1023_nand_rcw.cfg +++ /dev/null @@ -1,8 +0,0 @@ -#PBL preamble and RCW header for T1023RDB -aa55aa55 010e0100 -#SerDes Protocol: 0x77 -#Default Core=1200MHz, DDR=1600MT/s with single source clock -0810000c 00000000 00000000 00000000 -3b800003 00000012 e8104000 21000000 -00000000 00000000 00000000 00022800 -00000130 04020200 00000000 00000006 diff --git a/board/freescale/t102xrdb/t1023_sd_rcw.cfg b/board/freescale/t102xrdb/t1023_sd_rcw.cfg deleted file mode 100644 index dbf8fba553..0000000000 --- a/board/freescale/t102xrdb/t1023_sd_rcw.cfg +++ /dev/null @@ -1,8 +0,0 @@ -#PBL preamble and RCW header for T1023RDB -aa55aa55 010e0100 -#SerDes Protocol: 0x77 -#Default Core=1200MHz, DDR=1600MT/s with single source clock -0810000c 00000000 00000000 00000000 -3b800003 00000012 68104000 21000000 -00000000 00000000 00000000 00022800 -00000130 04020200 00000000 00000006 diff --git a/board/freescale/t102xrdb/t1023_spi_rcw.cfg b/board/freescale/t102xrdb/t1023_spi_rcw.cfg deleted file mode 100644 index 5edcdb50ea..0000000000 --- a/board/freescale/t102xrdb/t1023_spi_rcw.cfg +++ /dev/null @@ -1,8 +0,0 @@ -#PBL preamble and RCW header for T1023RDB -aa55aa55 010e0100 -#SerDes Protocol: 0x77 -#Default Core=1200MHz, DDR=1600MT/s with single source clock -0810000c 00000000 00000000 00000000 -3b800003 00000012 58104000 21000000 -00000000 00000000 00000000 00022800 -00000130 04020200 00000000 00000006 diff --git a/board/freescale/t102xrdb/t1024_nand_rcw.cfg b/board/freescale/t102xrdb/t1024_nand_rcw.cfg deleted file mode 100644 index cd6f906396..0000000000 --- a/board/freescale/t102xrdb/t1024_nand_rcw.cfg +++ /dev/null @@ -1,8 +0,0 @@ -#PBL preamble and RCW header for T1024RDB -aa55aa55 010e0100 -#SerDes Protocol: 0x95 -#Core/DDR: 1400Mhz/1600MT/s with single source clock -0810000c 00000000 00000000 00000000 -4a800003 80000012 ec027000 21000000 -00000000 00000000 00000000 00030810 -00000000 0b005a08 00000000 00000006 diff --git a/board/freescale/t102xrdb/t1024_pbi.cfg b/board/freescale/t102xrdb/t1024_pbi.cfg deleted file mode 100644 index 98efca25a2..0000000000 --- a/board/freescale/t102xrdb/t1024_pbi.cfg +++ /dev/null @@ -1,26 +0,0 @@ -#PBI commands -#Initialize CPC1 -09010000 00200400 -09138000 00000000 -091380c0 00000100 -#Configure CPC1 as 256KB SRAM -09010100 00000000 -09010104 fffc0007 -09010f00 081e000d -09010000 80000000 -#Configure LAW for CPC1 -09000cd0 00000000 -09000cd4 fffc0000 -09000cd8 81000011 -#Configure alternate space -09000010 00000000 -09000014 ff000000 -09000018 81000000 -#Configure SPI controller -09110000 80000403 -09110020 2d170008 -09110024 00100008 -09110028 00100008 -0911002c 00100008 -#Flush PBL data -091380c0 000FFFFF diff --git a/board/freescale/t102xrdb/t1024_sd_rcw.cfg b/board/freescale/t102xrdb/t1024_sd_rcw.cfg deleted file mode 100644 index 05b3f37763..0000000000 --- a/board/freescale/t102xrdb/t1024_sd_rcw.cfg +++ /dev/null @@ -1,8 +0,0 @@ -#PBL preamble and RCW header for T1024RDB -aa55aa55 010e0100 -#SerDes Protocol: 0x95 -#Core/DDR: 1400Mhz/1600MT/s with single source clock -0810000c 00000000 00000000 00000000 -4a800003 80000012 6c027000 21000000 -00000000 00000000 00000000 00030810 -00000000 0b005a08 00000000 00000006 diff --git a/board/freescale/t102xrdb/t1024_spi_rcw.cfg b/board/freescale/t102xrdb/t1024_spi_rcw.cfg deleted file mode 100644 index 8b695b4ab7..0000000000 --- a/board/freescale/t102xrdb/t1024_spi_rcw.cfg +++ /dev/null @@ -1,8 +0,0 @@ -#PBL preamble and RCW header for T1024RDB -aa55aa55 010e0100 -#SerDes Protocol: 0x95 -#Core/DDR: 1400Mhz/1600MT/s with single source clock -0810000c 00000000 00000000 00000000 -4a800003 80000012 5c027000 21000000 -00000000 00000000 00000000 00030810 -00000000 0b005a08 00000000 00000006 diff --git a/board/freescale/t102xrdb/t102xrdb.c b/board/freescale/t102xrdb/t102xrdb.c deleted file mode 100644 index 754fcb0ad5..0000000000 --- a/board/freescale/t102xrdb/t102xrdb.c +++ /dev/null @@ -1,394 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright 2014 Freescale Semiconductor, Inc. - * Copyright 2020 NXP - */ - -#include <common.h> -#include <command.h> -#include <env.h> -#include <fdt_support.h> -#include <i2c.h> -#include <image.h> -#include <init.h> -#include <netdev.h> -#include <linux/compiler.h> -#include <asm/mmu.h> -#include <asm/processor.h> -#include <asm/immap_85xx.h> -#include <asm/fsl_law.h> -#include <asm/fsl_serdes.h> -#include <asm/fsl_liodn.h> -#include <fm_eth.h> -#include "t102xrdb.h" -#ifdef CONFIG_TARGET_T1024RDB -#include "cpld.h" -#elif defined(CONFIG_TARGET_T1023RDB) -#include <i2c.h> -#include <mmc.h> -#endif -#include "../common/sleep.h" - -DECLARE_GLOBAL_DATA_PTR; - -#ifdef CONFIG_TARGET_T1023RDB -enum { - GPIO1_SD_SEL = 0x00020000, /* GPIO1_14, 0: eMMC, 1:SD/MMC */ - GPIO1_EMMC_SEL, - GPIO3_GET_VERSION, /* GPIO3_4/5, 00:RevB, 01: RevC */ - GPIO3_BRD_VER_MASK = 0x0c000000, - GPIO3_OFFSET = 0x2000, - I2C_GET_BANK, - I2C_SET_BANK0, - I2C_SET_BANK4, -}; -#endif - -int checkboard(void) -{ - struct cpu_type *cpu = gd->arch.cpu; - static const char *freq[3] = {"100.00MHZ", "125.00MHz", "156.25MHZ"}; - ccsr_gur_t __iomem *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - u32 srds_s1; - - srds_s1 = in_be32(&gur->rcwsr[4]) & FSL_CORENET2_RCWSR4_SRDS1_PRTCL; - srds_s1 >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT; - - printf("Board: %sRDB, ", cpu->name); -#if defined(CONFIG_TARGET_T1024RDB) - printf("Board rev: 0x%02x CPLD ver: 0x%02x, ", - CPLD_READ(hw_ver), CPLD_READ(sw_ver)); -#elif defined(CONFIG_TARGET_T1023RDB) - printf("Rev%c, ", t1023rdb_ctrl(GPIO3_GET_VERSION) + 'B'); -#endif - printf("boot from "); - -#ifdef CONFIG_SDCARD - puts("SD/MMC\n"); -#elif CONFIG_SPIFLASH - puts("SPI\n"); -#elif defined(CONFIG_TARGET_T1024RDB) - u8 reg; - - reg = CPLD_READ(flash_csr); - - if (reg & CPLD_BOOT_SEL) { - puts("NAND\n"); - } else { - reg = ((reg & CPLD_LBMAP_MASK) >> CPLD_LBMAP_SHIFT); - printf("NOR vBank%d\n", reg); - } -#elif defined(CONFIG_TARGET_T1023RDB) -#ifdef CONFIG_MTD_RAW_NAND - puts("NAND\n"); -#else - printf("NOR vBank%d\n", t1023rdb_ctrl(I2C_GET_BANK)); -#endif -#endif - - puts("SERDES Reference Clocks:\n"); - if (srds_s1 == 0x95) - printf("SD1_CLK1=%s, SD1_CLK2=%s\n", freq[2], freq[0]); - else - printf("SD1_CLK1=%s, SD1_CLK2=%s\n", freq[0], freq[1]); - - return 0; -} - -#ifdef CONFIG_TARGET_T1024RDB -static void board_mux_lane(void) -{ - ccsr_gur_t __iomem *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - u32 srds_prtcl_s1; - u8 reg = CPLD_READ(misc_ctl_status); - - srds_prtcl_s1 = in_be32(&gur->rcwsr[4]) & - FSL_CORENET2_RCWSR4_SRDS1_PRTCL; - srds_prtcl_s1 >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT; - - if (srds_prtcl_s1 == 0x95) { - /* Route Lane B to PCIE */ - CPLD_WRITE(misc_ctl_status, reg & ~CPLD_PCIE_SGMII_MUX); - } else { - /* Route Lane B to SGMII */ - CPLD_WRITE(misc_ctl_status, reg | CPLD_PCIE_SGMII_MUX); - } - CPLD_WRITE(boot_override, CPLD_OVERRIDE_MUX_EN); -} -#endif - -int board_early_init_f(void) -{ -#if defined(CONFIG_DEEP_SLEEP) - if (is_warm_boot()) - fsl_dp_disable_console(); -#endif - - return 0; -} - -int board_early_init_r(void) -{ -#ifdef CONFIG_SYS_FLASH_BASE - const unsigned int flashbase = CONFIG_SYS_FLASH_BASE; - int flash_esel = find_tlb_idx((void *)flashbase, 1); - /* - * Remap Boot flash region to caching-inhibited - * so that flash can be erased properly. - */ - - /* Flush d-cache and invalidate i-cache of any FLASH data */ - flush_dcache(); - invalidate_icache(); - if (flash_esel == -1) { - /* very unlikely unless something is messed up */ - puts("Error: Could not find TLB for FLASH BASE\n"); - flash_esel = 2; /* give our best effort to continue */ - } else { - /* invalidate existing TLB entry for flash + promjet */ - disable_tlb(flash_esel); - } - - set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, flash_esel, BOOKE_PAGESZ_256M, 1); -#endif - -#ifdef CONFIG_TARGET_T1024RDB - board_mux_lane(); -#endif - - return 0; -} - -unsigned long get_board_sys_clk(void) -{ - return CONFIG_SYS_CLK_FREQ; -} - -unsigned long get_board_ddr_clk(void) -{ - return CONFIG_DDR_CLK_FREQ; -} - -#ifdef CONFIG_TARGET_T1024RDB -void board_reset(void) -{ - CPLD_WRITE(reset_ctl1, CPLD_LBMAP_RESET); -} -#endif - -int misc_init_r(void) -{ - return 0; -} - -int ft_board_setup(void *blob, bd_t *bd) -{ - phys_addr_t base; - phys_size_t size; - - ft_cpu_setup(blob, bd); - - base = env_get_bootm_low(); - size = env_get_bootm_size(); - - fdt_fixup_memory(blob, (u64)base, (u64)size); - -#ifdef CONFIG_PCI - pci_of_setup(blob, bd); -#endif - - fdt_fixup_liodn(blob); - fsl_fdt_fixup_dr_usb(blob, bd); - -#ifdef CONFIG_SYS_DPAA_FMAN - fdt_fixup_fman_ethernet(blob); - fdt_fixup_board_enet(blob); -#endif - -#ifdef CONFIG_TARGET_T1023RDB - if (t1023rdb_ctrl(GPIO3_GET_VERSION) > 0) - fdt_enable_nor(blob); -#endif - - return 0; -} - -#ifdef CONFIG_TARGET_T1023RDB -/* Enable NOR flash for RevC */ -static void fdt_enable_nor(void *blob) -{ - int nodeoff = fdt_node_offset_by_compatible(blob, 0, "cfi-flash"); - - if (nodeoff >= 0) - fdt_status_okay(blob, nodeoff); - else - printf("WARNING unable to set status for NOR\n"); -} - -int board_mmc_getcd(struct mmc *mmc) -{ - ccsr_gpio_t __iomem *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR); - u32 val = in_be32(&pgpio->gpdat); - - /* GPIO1_14, 0: eMMC, 1: SD/MMC */ - val &= GPIO1_SD_SEL; - - return val ? -1 : 1; -} - -int board_mmc_getwp(struct mmc *mmc) -{ - ccsr_gpio_t __iomem *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR); - u32 val = in_be32(&pgpio->gpdat); - - val &= GPIO1_SD_SEL; - - return val ? -1 : 0; -} - -static u32 t1023rdb_ctrl(u32 ctrl_type) -{ - ccsr_gpio_t __iomem *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR); - ccsr_gur_t __iomem *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - u32 val; - u8 tmp; - int bus_num = I2C_PCA6408_BUS_NUM; - -#ifdef CONFIG_DM_I2C - struct udevice *dev; - int ret; - - ret = i2c_get_chip_for_busnum(bus_num, I2C_PCA6408_ADDR, - 1, &dev); - if (ret) { - printf("%s: Cannot find udev for a bus %d\n", __func__, - bus_num); - return ret; - } - switch (ctrl_type) { - case GPIO1_SD_SEL: - val = in_be32(&pgpio->gpdat); - val |= GPIO1_SD_SEL; - out_be32(&pgpio->gpdat, val); - setbits_be32(&pgpio->gpdir, GPIO1_SD_SEL); - break; - case GPIO1_EMMC_SEL: - val = in_be32(&pgpio->gpdat); - val &= ~GPIO1_SD_SEL; - out_be32(&pgpio->gpdat, val); - setbits_be32(&pgpio->gpdir, GPIO1_SD_SEL); - break; - case GPIO3_GET_VERSION: - pgpio = (ccsr_gpio_t *)(CONFIG_SYS_MPC85xx_GPIO_ADDR - + GPIO3_OFFSET); - val = in_be32(&pgpio->gpdat); - val = ((val & GPIO3_BRD_VER_MASK) >> 26) & 0x3; - if (val == 0x3) /* GPIO3_4/5 not used on RevB */ - val = 0; - return val; - case I2C_GET_BANK: - dm_i2c_read(dev, 0, &tmp, 1); - tmp &= 0x7; - tmp = ((tmp & 1) << 2) | (tmp & 2) | ((tmp & 4) >> 2); - return tmp; - case I2C_SET_BANK0: - tmp = 0x0; - dm_i2c_write(dev, 1, &tmp, 1); - tmp = 0xf8; - dm_i2c_write(dev, 3, &tmp, 1); - /* asserting HRESET_REQ */ - out_be32(&gur->rstcr, 0x2); - break; - case I2C_SET_BANK4: - tmp = 0x1; - dm_i2c_write(dev, 1, &tmp, 1); - tmp = 0xf8; - dm_i2c_write(dev, 3, &tmp, 1); - out_be32(&gur->rstcr, 0x2); - break; - default: - break; - } -#else - u32 orig_bus; - - orig_bus = i2c_get_bus_num(); - - switch (ctrl_type) { - case GPIO1_SD_SEL: - val = in_be32(&pgpio->gpdat); - val |= GPIO1_SD_SEL; - out_be32(&pgpio->gpdat, val); - setbits_be32(&pgpio->gpdir, GPIO1_SD_SEL); - break; - case GPIO1_EMMC_SEL: - val = in_be32(&pgpio->gpdat); - val &= ~GPIO1_SD_SEL; - out_be32(&pgpio->gpdat, val); - setbits_be32(&pgpio->gpdir, GPIO1_SD_SEL); - break; - case GPIO3_GET_VERSION: - pgpio = (ccsr_gpio_t *)(CONFIG_SYS_MPC85xx_GPIO_ADDR - + GPIO3_OFFSET); - val = in_be32(&pgpio->gpdat); - val = ((val & GPIO3_BRD_VER_MASK) >> 26) & 0x3; - if (val == 0x3) /* GPIO3_4/5 not used on RevB */ - val = 0; - return val; - case I2C_GET_BANK: - i2c_set_bus_num(bus_num); - i2c_read(I2C_PCA6408_ADDR, 0, 1, &tmp, 1); - tmp &= 0x7; - tmp = ((tmp & 1) << 2) | (tmp & 2) | ((tmp & 4) >> 2); - i2c_set_bus_num(orig_bus); - return tmp; - case I2C_SET_BANK0: - i2c_set_bus_num(bus_num); - tmp = 0x0; - i2c_write(I2C_PCA6408_ADDR, 1, 1, &tmp, 1); - tmp = 0xf8; - i2c_write(I2C_PCA6408_ADDR, 3, 1, &tmp, 1); - /* asserting HRESET_REQ */ - out_be32(&gur->rstcr, 0x2); - break; - case I2C_SET_BANK4: - i2c_set_bus_num(bus_num); - tmp = 0x1; - i2c_write(I2C_PCA6408_ADDR, 1, 1, &tmp, 1); - tmp = 0xf8; - i2c_write(I2C_PCA6408_ADDR, 3, 1, &tmp, 1); - out_be32(&gur->rstcr, 0x2); - break; - default: - break; - } -#endif - return 0; -} - -static int switch_cmd(struct cmd_tbl *cmdtp, int flag, int argc, - char *const argv[]) -{ - if (argc < 2) - return CMD_RET_USAGE; - if (!strcmp(argv[1], "bank0")) - t1023rdb_ctrl(I2C_SET_BANK0); - else if (!strcmp(argv[1], "bank4") || !strcmp(argv[1], "altbank")) - t1023rdb_ctrl(I2C_SET_BANK4); - else if (!strcmp(argv[1], "sd")) - t1023rdb_ctrl(GPIO1_SD_SEL); - else if (!strcmp(argv[1], "emmc")) - t1023rdb_ctrl(GPIO1_EMMC_SEL); - else - return CMD_RET_USAGE; - return 0; -} - -U_BOOT_CMD( - switch, 2, 0, switch_cmd, - "for bank0/bank4/sd/emmc switch control in runtime", - "command (e.g. switch bank4)" -); -#endif diff --git a/board/freescale/t102xrdb/t102xrdb.h b/board/freescale/t102xrdb/t102xrdb.h deleted file mode 100644 index 5d46014823..0000000000 --- a/board/freescale/t102xrdb/t102xrdb.h +++ /dev/null @@ -1,15 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright 2014 Freescale Semiconductor, Inc. - */ - -#ifndef __T1024_RDB_H__ -#define __T1024_RDB_H__ - -void fdt_fixup_board_enet(void *blob); -void pci_of_setup(void *blob, bd_t *bd); -#ifdef CONFIG_TARGET_T1023RDB -static u32 t1023rdb_ctrl(u32 ctrl_type); -static void fdt_enable_nor(void *blob); -#endif -#endif diff --git a/board/freescale/t102xrdb/tlb.c b/board/freescale/t102xrdb/tlb.c deleted file mode 100644 index 97080eb95e..0000000000 --- a/board/freescale/t102xrdb/tlb.c +++ /dev/null @@ -1,116 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright 2014 Freescale Semiconductor, Inc. - */ - -#include <common.h> -#include <asm/mmu.h> - -struct fsl_e_tlb_entry tlb_table[] = { - /* TLB 0 - for temp stack in cache */ - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, - CONFIG_SYS_INIT_RAM_ADDR_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024, - CONFIG_SYS_INIT_RAM_ADDR_PHYS + 4 * 1024, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024, - CONFIG_SYS_INIT_RAM_ADDR_PHYS + 8 * 1024, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024, - CONFIG_SYS_INIT_RAM_ADDR_PHYS + 12 * 1024, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - - /* TLB 1 */ - /* *I*** - Covers boot page */ -#if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SYS_INIT_L3_ADDR) - /* - * *I*G - L3SRAM. When L3 is used as 256K SRAM, the address of the - * SRAM is at 0xfffc0000, it covered the 0xfffff000. - */ - SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L3_ADDR, CONFIG_SYS_INIT_L3_ADDR, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 0, BOOKE_PAGESZ_256K, 1), -#else - SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 0, BOOKE_PAGESZ_4K, 1), -#endif - - /* *I*G* - CCSRBAR */ - SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 1, BOOKE_PAGESZ_16M, 1), - - /* *I*G* - Flash, localbus */ - /* This will be changed to *I*G* after relocation to RAM. */ - SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS, - MAS3_SX|MAS3_SR, MAS2_W|MAS2_G, - 0, 2, BOOKE_PAGESZ_256M, 1), - -#ifndef CONFIG_SPL_BUILD - /* *I*G* - PCI */ - SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT, CONFIG_SYS_PCIE1_MEM_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 3, BOOKE_PAGESZ_1G, 1), - - /* *I*G* - PCI I/O */ - SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_IO_VIRT, CONFIG_SYS_PCIE1_IO_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 4, BOOKE_PAGESZ_256K, 1), - - /* Bman/Qman */ -#ifdef CONFIG_SYS_BMAN_MEM_PHYS - SET_TLB_ENTRY(1, CONFIG_SYS_BMAN_MEM_BASE, CONFIG_SYS_BMAN_MEM_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 5, BOOKE_PAGESZ_16M, 1), - SET_TLB_ENTRY(1, CONFIG_SYS_BMAN_MEM_BASE + 0x01000000, - CONFIG_SYS_BMAN_MEM_PHYS + 0x01000000, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 6, BOOKE_PAGESZ_16M, 1), -#endif -#ifdef CONFIG_SYS_QMAN_MEM_PHYS - SET_TLB_ENTRY(1, CONFIG_SYS_QMAN_MEM_BASE, CONFIG_SYS_QMAN_MEM_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 7, BOOKE_PAGESZ_16M, 1), - SET_TLB_ENTRY(1, CONFIG_SYS_QMAN_MEM_BASE + 0x01000000, - CONFIG_SYS_QMAN_MEM_PHYS + 0x01000000, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 8, BOOKE_PAGESZ_16M, 1), -#endif -#endif -#ifdef CONFIG_SYS_DCSRBAR_PHYS - SET_TLB_ENTRY(1, CONFIG_SYS_DCSRBAR, CONFIG_SYS_DCSRBAR_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 9, BOOKE_PAGESZ_4M, 1), -#endif -#ifdef CONFIG_SYS_NAND_BASE - SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 10, BOOKE_PAGESZ_64K, 1), -#endif -#ifdef CONFIG_SYS_CPLD_BASE - SET_TLB_ENTRY(1, CONFIG_SYS_CPLD_BASE, CONFIG_SYS_CPLD_BASE_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 11, BOOKE_PAGESZ_256K, 1), -#endif - -#if defined(CONFIG_RAMBOOT_PBL) && !defined(CONFIG_SPL_BUILD) - SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_M, - 0, 12, BOOKE_PAGESZ_1G, 1), - SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE + 0x40000000, - CONFIG_SYS_DDR_SDRAM_BASE + 0x40000000, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_M, - 0, 13, BOOKE_PAGESZ_1G, 1) -#endif - /* entry 14 and 15 has been used hard coded, they will be disabled - * in cpu_init_f, so if needed more, will use entry 16 later. - */ -}; - -int num_tlb_entries = ARRAY_SIZE(tlb_table); diff --git a/configs/T1023RDB_NAND_defconfig b/configs/T1023RDB_NAND_defconfig deleted file mode 100644 index 75604383c6..0000000000 --- a/configs/T1023RDB_NAND_defconfig +++ /dev/null @@ -1,77 +0,0 @@ -CONFIG_PPC=y -CONFIG_SYS_TEXT_BASE=0x30001000 -CONFIG_SPL_LIBCOMMON_SUPPORT=y -CONFIG_SPL_LIBGENERIC_SUPPORT=y -CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_OFFSET=0x140000 -CONFIG_SPL_SERIAL_SUPPORT=y -CONFIG_SPL_DRIVERS_MISC_SUPPORT=y -CONFIG_SPL=y -CONFIG_SPL_TEXT_BASE=0xFFFD8000 -CONFIG_MPC85xx=y -CONFIG_TARGET_T1023RDB=y -CONFIG_SYS_CUSTOM_LDSCRIPT=y -CONFIG_SYS_LDSCRIPT="arch/powerpc/cpu/mpc85xx/u-boot-nand.lds" -CONFIG_FIT=y -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL" -CONFIG_BOOTDELAY=10 -CONFIG_SYS_CONSOLE_IS_IN_ENV=y -CONFIG_BOARD_EARLY_INIT_R=y -# CONFIG_SPL_FRAMEWORK is not set -CONFIG_SPL_NAND_BOOT=y -CONFIG_SPL_FSL_PBL=y -CONFIG_SPL_ENV_SUPPORT=y -CONFIG_SPL_I2C_SUPPORT=y -CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y -CONFIG_SPL_NAND_SUPPORT=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_GREPENV=y -CONFIG_CMD_MEMTEST=y -CONFIG_SYS_ALT_MEMTEST=y -CONFIG_SYS_MEMTEST_START=0x00200000 -CONFIG_SYS_MEMTEST_END=0x00400000 -# CONFIG_CMD_FLASH is not set -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_SF=y -CONFIG_CMD_USB=y -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_DATE=y -CONFIG_MP=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_FAT=y -CONFIG_CMD_MTDPARTS=y -CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor,nand0=fff800000.flash,spi0=spife110000.1" -CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);fff800000.flash:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);spife110000.0:1m(uboot),5m(kernel),128k(dtb),-(user)" -CONFIG_ENV_IS_IN_NAND=y -CONFIG_FSL_CAAM=y -CONFIG_FSL_ESDHC=y -CONFIG_MTD=y -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y -CONFIG_FLASH_CFI_MTD=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_MTD_RAW_NAND=y -CONFIG_SPI_FLASH=y -CONFIG_SF_DEFAULT_MODE=0 -CONFIG_SF_DEFAULT_SPEED=10000000 -CONFIG_SPI_FLASH_SPANSION=y -CONFIG_PHYLIB=y -CONFIG_PHY_AQUANTIA=y -CONFIG_PHY_REALTEK=y -CONFIG_E1000=y -CONFIG_FMAN_ENET=y -CONFIG_MII=y -CONFIG_SYS_QE_FMAN_FW_IN_NAND=y -CONFIG_SYS_NS16550=y -CONFIG_SPI=y -CONFIG_FSL_ESPI=y -CONFIG_USB=y -CONFIG_USB_STORAGE=y -CONFIG_OF_LIBFDT=y diff --git a/configs/T1023RDB_SDCARD_defconfig b/configs/T1023RDB_SDCARD_defconfig deleted file mode 100644 index 4471c83f3f..0000000000 --- a/configs/T1023RDB_SDCARD_defconfig +++ /dev/null @@ -1,74 +0,0 @@ -CONFIG_PPC=y -CONFIG_SYS_TEXT_BASE=0x30001000 -CONFIG_SPL_LIBCOMMON_SUPPORT=y -CONFIG_SPL_LIBGENERIC_SUPPORT=y -CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_OFFSET=0x100000 -CONFIG_SPL_MMC_SUPPORT=y -CONFIG_SPL_SERIAL_SUPPORT=y -CONFIG_SPL_DRIVERS_MISC_SUPPORT=y -CONFIG_SPL=y -CONFIG_SPL_TEXT_BASE=0xFFFD8000 -CONFIG_MPC85xx=y -CONFIG_TARGET_T1023RDB=y -CONFIG_FIT=y -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SDCARD" -CONFIG_BOOTDELAY=10 -CONFIG_SYS_CONSOLE_IS_IN_ENV=y -CONFIG_BOARD_EARLY_INIT_R=y -# CONFIG_SPL_FRAMEWORK is not set -CONFIG_SPL_MMC_BOOT=y -CONFIG_SPL_FSL_PBL=y -CONFIG_SPL_ENV_SUPPORT=y -CONFIG_SPL_I2C_SUPPORT=y -CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_GREPENV=y -CONFIG_CMD_MEMTEST=y -CONFIG_SYS_ALT_MEMTEST=y -CONFIG_SYS_MEMTEST_START=0x00200000 -CONFIG_SYS_MEMTEST_END=0x00400000 -# CONFIG_CMD_FLASH is not set -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_SF=y -CONFIG_CMD_USB=y -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_DATE=y -CONFIG_MP=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_FAT=y -CONFIG_CMD_MTDPARTS=y -CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor,nand0=fff800000.flash,spi0=spife110000.1" -CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);fff800000.flash:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);spife110000.0:1m(uboot),5m(kernel),128k(dtb),-(user)" -CONFIG_ENV_IS_IN_MMC=y -CONFIG_FSL_CAAM=y -CONFIG_FSL_ESDHC=y -CONFIG_MTD=y -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y -CONFIG_FLASH_CFI_MTD=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_SPI_FLASH=y -CONFIG_SF_DEFAULT_MODE=0 -CONFIG_SF_DEFAULT_SPEED=10000000 -CONFIG_SPI_FLASH_SPANSION=y -CONFIG_PHYLIB=y -CONFIG_PHY_AQUANTIA=y -CONFIG_PHY_REALTEK=y -CONFIG_E1000=y -CONFIG_FMAN_ENET=y -CONFIG_MII=y -CONFIG_SYS_QE_FMAN_FW_IN_MMC=y -CONFIG_SYS_NS16550=y -CONFIG_SPI=y -CONFIG_FSL_ESPI=y -CONFIG_USB=y -CONFIG_USB_STORAGE=y -CONFIG_OF_LIBFDT=y diff --git a/configs/T1023RDB_SECURE_BOOT_defconfig b/configs/T1023RDB_SECURE_BOOT_defconfig deleted file mode 100644 index 34fe6e5e52..0000000000 --- a/configs/T1023RDB_SECURE_BOOT_defconfig +++ /dev/null @@ -1,64 +0,0 @@ -CONFIG_PPC=y -CONFIG_SYS_TEXT_BASE=0xEFF40000 -CONFIG_ENV_SIZE=0x2000 -CONFIG_NXP_ESBC=y -CONFIG_MPC85xx=y -CONFIG_TARGET_T1023RDB=y -# CONFIG_SYS_MALLOC_F is not set -CONFIG_FIT=y -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_BOOTDELAY=10 -CONFIG_SYS_CONSOLE_IS_IN_ENV=y -CONFIG_BOARD_EARLY_INIT_R=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_IMLS=y -CONFIG_CMD_GREPENV=y -CONFIG_CMD_MEMTEST=y -CONFIG_SYS_ALT_MEMTEST=y -CONFIG_SYS_MEMTEST_START=0x00200000 -CONFIG_SYS_MEMTEST_END=0x00400000 -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_SF=y -CONFIG_CMD_USB=y -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_DATE=y -CONFIG_MP=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_FAT=y -CONFIG_CMD_MTDPARTS=y -CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor,nand0=fff800000.flash,spi0=spife110000.1" -CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);fff800000.flash:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);spife110000.0:1m(uboot),5m(kernel),128k(dtb),-(user)" -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_DM=y -CONFIG_FSL_ESDHC=y -CONFIG_MTD=y -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y -CONFIG_FLASH_CFI_MTD=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_SPI_FLASH=y -CONFIG_SF_DEFAULT_MODE=0 -CONFIG_SF_DEFAULT_SPEED=10000000 -CONFIG_SPI_FLASH_SPANSION=y -CONFIG_PHYLIB=y -CONFIG_PHY_AQUANTIA=y -CONFIG_PHY_REALTEK=y -CONFIG_E1000=y -CONFIG_FMAN_ENET=y -CONFIG_MII=y -CONFIG_SYS_QE_FMAN_FW_IN_NOR=y -CONFIG_SYS_NS16550=y -CONFIG_SPI=y -CONFIG_FSL_ESPI=y -CONFIG_USB=y -CONFIG_USB_STORAGE=y -CONFIG_RSA=y -CONFIG_SPL_RSA=y -CONFIG_RSA_SOFTWARE_EXP=y -CONFIG_OF_LIBFDT=y diff --git a/configs/T1023RDB_SPIFLASH_defconfig b/configs/T1023RDB_SPIFLASH_defconfig deleted file mode 100644 index 599aeec688..0000000000 --- a/configs/T1023RDB_SPIFLASH_defconfig +++ /dev/null @@ -1,77 +0,0 @@ -CONFIG_PPC=y -CONFIG_SYS_TEXT_BASE=0x30001000 -CONFIG_SPL_LIBCOMMON_SUPPORT=y -CONFIG_SPL_LIBGENERIC_SUPPORT=y -CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_OFFSET=0x100000 -CONFIG_ENV_SECT_SIZE=0x40000 -CONFIG_SPL_SERIAL_SUPPORT=y -CONFIG_SPL_DRIVERS_MISC_SUPPORT=y -CONFIG_SPL=y -CONFIG_SPL_SPI_FLASH_SUPPORT=y -CONFIG_SPL_SPI_SUPPORT=y -CONFIG_SPL_TEXT_BASE=0xFFFD8000 -CONFIG_MPC85xx=y -CONFIG_TARGET_T1023RDB=y -CONFIG_FIT=y -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPIFLASH" -CONFIG_BOOTDELAY=10 -CONFIG_SYS_CONSOLE_IS_IN_ENV=y -CONFIG_BOARD_EARLY_INIT_R=y -# CONFIG_SPL_FRAMEWORK is not set -CONFIG_SPL_SPI_BOOT=y -CONFIG_SPL_FSL_PBL=y -CONFIG_SPL_ENV_SUPPORT=y -CONFIG_SPL_I2C_SUPPORT=y -CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_GREPENV=y -CONFIG_CMD_MEMTEST=y -CONFIG_SYS_ALT_MEMTEST=y -CONFIG_SYS_MEMTEST_START=0x00200000 -CONFIG_SYS_MEMTEST_END=0x00400000 -# CONFIG_CMD_FLASH is not set -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_SF=y -CONFIG_CMD_USB=y -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_DATE=y -CONFIG_MP=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_FAT=y -CONFIG_CMD_MTDPARTS=y -CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor,nand0=fff800000.flash,spi0=spife110000.1" -CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);fff800000.flash:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);spife110000.0:1m(uboot),5m(kernel),128k(dtb),-(user)" -CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_ENV_ADDR=0xFFFC9000 -CONFIG_FSL_CAAM=y -CONFIG_FSL_ESDHC=y -CONFIG_MTD=y -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y -CONFIG_FLASH_CFI_MTD=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_SPI_FLASH=y -CONFIG_SF_DEFAULT_MODE=0 -CONFIG_SF_DEFAULT_SPEED=10000000 -CONFIG_SPI_FLASH_SPANSION=y -CONFIG_PHYLIB=y -CONFIG_PHY_AQUANTIA=y -CONFIG_PHY_REALTEK=y -CONFIG_E1000=y -CONFIG_FMAN_ENET=y -CONFIG_MII=y -CONFIG_SYS_QE_FMAN_FW_IN_SPIFLASH=y -CONFIG_SYS_NS16550=y -CONFIG_SPI=y -CONFIG_FSL_ESPI=y -CONFIG_USB=y -CONFIG_USB_STORAGE=y -CONFIG_OF_LIBFDT=y diff --git a/configs/T1023RDB_defconfig b/configs/T1023RDB_defconfig deleted file mode 100644 index 62cc129a31..0000000000 --- a/configs/T1023RDB_defconfig +++ /dev/null @@ -1,61 +0,0 @@ -CONFIG_PPC=y -CONFIG_SYS_TEXT_BASE=0xEFF40000 -CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_SECT_SIZE=0x20000 -CONFIG_MPC85xx=y -CONFIG_TARGET_T1023RDB=y -CONFIG_FIT=y -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_BOOTDELAY=10 -CONFIG_SYS_CONSOLE_IS_IN_ENV=y -CONFIG_BOARD_EARLY_INIT_R=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_IMLS=y -CONFIG_CMD_GREPENV=y -CONFIG_CMD_MEMTEST=y -CONFIG_SYS_ALT_MEMTEST=y -CONFIG_SYS_MEMTEST_START=0x00200000 -CONFIG_SYS_MEMTEST_END=0x00400000 -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_SF=y -CONFIG_CMD_USB=y -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_DATE=y -CONFIG_MP=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_FAT=y -CONFIG_CMD_MTDPARTS=y -CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor,nand0=fff800000.flash,spi0=spife110000.1" -CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);fff800000.flash:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);spife110000.0:1m(uboot),5m(kernel),128k(dtb),-(user)" -CONFIG_ENV_IS_IN_FLASH=y -CONFIG_ENV_ADDR=0xEFF20000 -CONFIG_FSL_CAAM=y -CONFIG_FSL_ESDHC=y -CONFIG_MTD=y -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y -CONFIG_FLASH_CFI_MTD=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_SPI_FLASH=y -CONFIG_SF_DEFAULT_MODE=0 -CONFIG_SF_DEFAULT_SPEED=10000000 -CONFIG_SPI_FLASH_SPANSION=y -CONFIG_PHYLIB=y -CONFIG_PHY_AQUANTIA=y -CONFIG_PHY_REALTEK=y -CONFIG_E1000=y -CONFIG_FMAN_ENET=y -CONFIG_MII=y -CONFIG_SYS_QE_FMAN_FW_IN_NOR=y -CONFIG_SYS_NS16550=y -CONFIG_SPI=y -CONFIG_FSL_ESPI=y -CONFIG_USB=y -CONFIG_USB_STORAGE=y -CONFIG_OF_LIBFDT=y diff --git a/configs/T1024RDB_NAND_defconfig b/configs/T1024RDB_NAND_defconfig deleted file mode 100644 index 9b116548a7..0000000000 --- a/configs/T1024RDB_NAND_defconfig +++ /dev/null @@ -1,86 +0,0 @@ -CONFIG_PPC=y -CONFIG_SYS_TEXT_BASE=0x30001000 -CONFIG_SPL_LIBCOMMON_SUPPORT=y -CONFIG_SPL_LIBGENERIC_SUPPORT=y -CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_OFFSET=0x100000 -CONFIG_SPL_SERIAL_SUPPORT=y -CONFIG_SPL_DRIVERS_MISC_SUPPORT=y -CONFIG_SPL=y -CONFIG_SPL_TEXT_BASE=0xFFFD8000 -CONFIG_MPC85xx=y -CONFIG_TARGET_T1024RDB=y -CONFIG_SYS_CUSTOM_LDSCRIPT=y -CONFIG_SYS_LDSCRIPT="arch/powerpc/cpu/mpc85xx/u-boot-nand.lds" -CONFIG_FIT=y -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL" -CONFIG_BOOTDELAY=10 -CONFIG_SILENT_CONSOLE=y -CONFIG_SYS_CONSOLE_IS_IN_ENV=y -CONFIG_BOARD_EARLY_INIT_F=y -CONFIG_BOARD_EARLY_INIT_R=y -# CONFIG_SPL_FRAMEWORK is not set -CONFIG_SPL_NAND_BOOT=y -CONFIG_SPL_FSL_PBL=y -CONFIG_SPL_ENV_SUPPORT=y -CONFIG_SPL_I2C_SUPPORT=y -CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y -CONFIG_SPL_NAND_SUPPORT=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_IMLS=y -CONFIG_CMD_GREPENV=y -CONFIG_CMD_MEMTEST=y -CONFIG_SYS_ALT_MEMTEST=y -CONFIG_SYS_MEMTEST_START=0x00200000 -CONFIG_SYS_MEMTEST_END=0x00400000 -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_SF=y -CONFIG_CMD_USB=y -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_MP=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_FAT=y -CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor,nand0=fff800000.flash,spi0=spife110000.1" -CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);fff800000.flash:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);spife110000.0:1m(uboot),5m(kernel),128k(dtb),-(user)" -CONFIG_OF_CONTROL=y -CONFIG_DEFAULT_DEVICE_TREE="t1024rdb" -CONFIG_ENV_IS_IN_NAND=y -CONFIG_DM=y -CONFIG_FSL_CAAM=y -CONFIG_SYS_FSL_DDR3=y -CONFIG_DM_I2C=y -CONFIG_DM_MMC=y -CONFIG_FSL_ESDHC=y -CONFIG_MTD=y -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y -CONFIG_FLASH_CFI_MTD=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_MTD_RAW_NAND=y -CONFIG_SPI_FLASH=y -CONFIG_SF_DEFAULT_MODE=0 -CONFIG_SF_DEFAULT_SPEED=10000000 -CONFIG_SPI_FLASH_STMICRO=y -CONFIG_PHYLIB=y -CONFIG_PHY_AQUANTIA=y -CONFIG_PHY_REALTEK=y -CONFIG_E1000=y -CONFIG_FMAN_ENET=y -CONFIG_MII=y -CONFIG_DM_PCI=y -CONFIG_DM_PCI_COMPAT=y -CONFIG_PCIE_FSL=y -CONFIG_SYS_QE_FMAN_FW_IN_NAND=y -CONFIG_DM_RTC=y -CONFIG_SYS_NS16550=y -CONFIG_SPI=y -CONFIG_FSL_ESPI=y -CONFIG_USB=y -CONFIG_DM_USB=y diff --git a/configs/T1024RDB_SDCARD_defconfig b/configs/T1024RDB_SDCARD_defconfig deleted file mode 100644 index 5e087fe2f3..0000000000 --- a/configs/T1024RDB_SDCARD_defconfig +++ /dev/null @@ -1,83 +0,0 @@ -CONFIG_PPC=y -CONFIG_SYS_TEXT_BASE=0x30001000 -CONFIG_SPL_LIBCOMMON_SUPPORT=y -CONFIG_SPL_LIBGENERIC_SUPPORT=y -CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_OFFSET=0x100000 -CONFIG_SPL_MMC_SUPPORT=y -CONFIG_SPL_SERIAL_SUPPORT=y -CONFIG_SPL_DRIVERS_MISC_SUPPORT=y -CONFIG_SPL=y -CONFIG_SPL_TEXT_BASE=0xFFFD8000 -CONFIG_MPC85xx=y -CONFIG_TARGET_T1024RDB=y -CONFIG_FIT=y -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SDCARD" -CONFIG_BOOTDELAY=10 -CONFIG_SILENT_CONSOLE=y -CONFIG_SYS_CONSOLE_IS_IN_ENV=y -CONFIG_BOARD_EARLY_INIT_F=y -CONFIG_BOARD_EARLY_INIT_R=y -# CONFIG_SPL_FRAMEWORK is not set -CONFIG_SPL_MMC_BOOT=y -CONFIG_SPL_FSL_PBL=y -CONFIG_SPL_ENV_SUPPORT=y -CONFIG_SPL_I2C_SUPPORT=y -CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_IMLS=y -CONFIG_CMD_GREPENV=y -CONFIG_CMD_MEMTEST=y -CONFIG_SYS_ALT_MEMTEST=y -CONFIG_SYS_MEMTEST_START=0x00200000 -CONFIG_SYS_MEMTEST_END=0x00400000 -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_SF=y -CONFIG_CMD_USB=y -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_MP=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_FAT=y -CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor,nand0=fff800000.flash,spi0=spife110000.1" -CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);fff800000.flash:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);spife110000.0:1m(uboot),5m(kernel),128k(dtb),-(user)" -CONFIG_OF_CONTROL=y -CONFIG_DEFAULT_DEVICE_TREE="t1024rdb" -CONFIG_ENV_IS_IN_MMC=y -CONFIG_DM=y -CONFIG_FSL_CAAM=y -CONFIG_SYS_FSL_DDR3=y -CONFIG_DM_I2C=y -CONFIG_DM_MMC=y -CONFIG_FSL_ESDHC=y -CONFIG_MTD=y -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y -CONFIG_FLASH_CFI_MTD=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_SPI_FLASH=y -CONFIG_SF_DEFAULT_MODE=0 -CONFIG_SF_DEFAULT_SPEED=10000000 -CONFIG_SPI_FLASH_STMICRO=y -CONFIG_PHYLIB=y -CONFIG_PHY_AQUANTIA=y -CONFIG_PHY_REALTEK=y -CONFIG_E1000=y -CONFIG_FMAN_ENET=y -CONFIG_MII=y -CONFIG_DM_PCI=y -CONFIG_DM_PCI_COMPAT=y -CONFIG_PCIE_FSL=y -CONFIG_SYS_QE_FMAN_FW_IN_MMC=y -CONFIG_DM_RTC=y -CONFIG_SYS_NS16550=y -CONFIG_SPI=y -CONFIG_FSL_ESPI=y -CONFIG_USB=y -CONFIG_DM_USB=y diff --git a/configs/T1024RDB_SECURE_BOOT_defconfig b/configs/T1024RDB_SECURE_BOOT_defconfig deleted file mode 100644 index f23f021143..0000000000 --- a/configs/T1024RDB_SECURE_BOOT_defconfig +++ /dev/null @@ -1,66 +0,0 @@ -CONFIG_PPC=y -CONFIG_SYS_TEXT_BASE=0xEFF40000 -CONFIG_ENV_SIZE=0x2000 -CONFIG_NXP_ESBC=y -CONFIG_MPC85xx=y -CONFIG_TARGET_T1024RDB=y -# CONFIG_SYS_MALLOC_F is not set -CONFIG_FIT=y -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_BOOTDELAY=10 -CONFIG_SILENT_CONSOLE=y -CONFIG_SYS_CONSOLE_IS_IN_ENV=y -CONFIG_BOARD_EARLY_INIT_F=y -CONFIG_BOARD_EARLY_INIT_R=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_IMLS=y -CONFIG_CMD_GREPENV=y -CONFIG_CMD_MEMTEST=y -CONFIG_SYS_ALT_MEMTEST=y -CONFIG_SYS_MEMTEST_START=0x00200000 -CONFIG_SYS_MEMTEST_END=0x00400000 -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_SF=y -CONFIG_CMD_USB=y -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_DATE=y -CONFIG_MP=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_FAT=y -CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor,nand0=fff800000.flash,spi0=spife110000.1" -CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);fff800000.flash:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);spife110000.0:1m(uboot),5m(kernel),128k(dtb),-(user)" -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_DM=y -CONFIG_SYS_FSL_DDR3=y -CONFIG_FSL_ESDHC=y -CONFIG_MTD=y -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y -CONFIG_FLASH_CFI_MTD=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_SPI_FLASH=y -CONFIG_SF_DEFAULT_MODE=0 -CONFIG_SF_DEFAULT_SPEED=10000000 -CONFIG_SPI_FLASH_STMICRO=y -CONFIG_PHYLIB=y -CONFIG_PHY_AQUANTIA=y -CONFIG_PHY_REALTEK=y -CONFIG_E1000=y -CONFIG_FMAN_ENET=y -CONFIG_MII=y -CONFIG_SYS_QE_FMAN_FW_IN_NOR=y -CONFIG_SYS_NS16550=y -CONFIG_SPI=y -CONFIG_FSL_ESPI=y -CONFIG_USB=y -CONFIG_USB_STORAGE=y -CONFIG_RSA=y -CONFIG_SPL_RSA=y -CONFIG_RSA_SOFTWARE_EXP=y -CONFIG_OF_LIBFDT=y diff --git a/configs/T1024RDB_SPIFLASH_defconfig b/configs/T1024RDB_SPIFLASH_defconfig deleted file mode 100644 index 39b4537e71..0000000000 --- a/configs/T1024RDB_SPIFLASH_defconfig +++ /dev/null @@ -1,86 +0,0 @@ -CONFIG_PPC=y -CONFIG_SYS_TEXT_BASE=0x30001000 -CONFIG_SPL_LIBCOMMON_SUPPORT=y -CONFIG_SPL_LIBGENERIC_SUPPORT=y -CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_OFFSET=0x100000 -CONFIG_ENV_SECT_SIZE=0x10000 -CONFIG_SPL_SERIAL_SUPPORT=y -CONFIG_SPL_DRIVERS_MISC_SUPPORT=y -CONFIG_SPL=y -CONFIG_SPL_SPI_FLASH_SUPPORT=y -CONFIG_SPL_SPI_SUPPORT=y -CONFIG_SPL_TEXT_BASE=0xFFFD8000 -CONFIG_MPC85xx=y -CONFIG_TARGET_T1024RDB=y -CONFIG_FIT=y -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPIFLASH" -CONFIG_BOOTDELAY=10 -CONFIG_SILENT_CONSOLE=y -CONFIG_SYS_CONSOLE_IS_IN_ENV=y -CONFIG_BOARD_EARLY_INIT_F=y -CONFIG_BOARD_EARLY_INIT_R=y -# CONFIG_SPL_FRAMEWORK is not set -CONFIG_SPL_SPI_BOOT=y -CONFIG_SPL_FSL_PBL=y -CONFIG_SPL_ENV_SUPPORT=y -CONFIG_SPL_I2C_SUPPORT=y -CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_IMLS=y -CONFIG_CMD_GREPENV=y -CONFIG_CMD_MEMTEST=y -CONFIG_SYS_ALT_MEMTEST=y -CONFIG_SYS_MEMTEST_START=0x00200000 -CONFIG_SYS_MEMTEST_END=0x00400000 -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_SF=y -CONFIG_CMD_USB=y -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_MP=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_FAT=y -CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor,nand0=fff800000.flash,spi0=spife110000.1" -CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);fff800000.flash:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);spife110000.0:1m(uboot),5m(kernel),128k(dtb),-(user)" -CONFIG_OF_CONTROL=y -CONFIG_DEFAULT_DEVICE_TREE="t1024rdb" -CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_ENV_ADDR=0xFFFC9000 -CONFIG_DM=y -CONFIG_FSL_CAAM=y -CONFIG_SYS_FSL_DDR3=y -CONFIG_DM_I2C=y -CONFIG_DM_MMC=y -CONFIG_FSL_ESDHC=y -CONFIG_MTD=y -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y -CONFIG_FLASH_CFI_MTD=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_SPI_FLASH=y -CONFIG_SF_DEFAULT_MODE=0 -CONFIG_SF_DEFAULT_SPEED=10000000 -CONFIG_SPI_FLASH_STMICRO=y -CONFIG_PHYLIB=y -CONFIG_PHY_AQUANTIA=y -CONFIG_PHY_REALTEK=y -CONFIG_E1000=y -CONFIG_FMAN_ENET=y -CONFIG_MII=y -CONFIG_DM_PCI=y -CONFIG_DM_PCI_COMPAT=y -CONFIG_PCIE_FSL=y -CONFIG_SYS_QE_FMAN_FW_IN_SPIFLASH=y -CONFIG_DM_RTC=y -CONFIG_SYS_NS16550=y -CONFIG_SPI=y -CONFIG_FSL_ESPI=y -CONFIG_USB=y -CONFIG_DM_USB=y diff --git a/configs/T1024RDB_defconfig b/configs/T1024RDB_defconfig deleted file mode 100644 index 8ff2fe3f0c..0000000000 --- a/configs/T1024RDB_defconfig +++ /dev/null @@ -1,71 +0,0 @@ -CONFIG_PPC=y -CONFIG_SYS_TEXT_BASE=0xEFF40000 -CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_SECT_SIZE=0x20000 -CONFIG_MPC85xx=y -CONFIG_TARGET_T1024RDB=y -CONFIG_MPC85XX_HAVE_RESET_VECTOR=y -CONFIG_FIT=y -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_BOOTDELAY=10 -CONFIG_SILENT_CONSOLE=y -CONFIG_SYS_CONSOLE_IS_IN_ENV=y -CONFIG_BOARD_EARLY_INIT_F=y -CONFIG_BOARD_EARLY_INIT_R=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_IMLS=y -CONFIG_CMD_GREPENV=y -CONFIG_CMD_MEMTEST=y -CONFIG_SYS_ALT_MEMTEST=y -CONFIG_SYS_MEMTEST_START=0x00200000 -CONFIG_SYS_MEMTEST_END=0x00400000 -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_SF=y -CONFIG_CMD_USB=y -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_MP=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_FAT=y -CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor,nand0=fff800000.flash,spi0=spife110000.1" -CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);fff800000.flash:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);spife110000.0:1m(uboot),5m(kernel),128k(dtb),-(user)" -CONFIG_OF_CONTROL=y -CONFIG_DEFAULT_DEVICE_TREE="t1024rdb" -CONFIG_ENV_IS_IN_FLASH=y -CONFIG_ENV_ADDR=0xEFF20000 -CONFIG_DM=y -CONFIG_FSL_CAAM=y -CONFIG_SYS_FSL_DDR3=y -CONFIG_DM_I2C=y -CONFIG_DM_MMC=y -CONFIG_FSL_ESDHC=y -CONFIG_MTD=y -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y -CONFIG_FLASH_CFI_MTD=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_SPI_FLASH=y -CONFIG_SF_DEFAULT_MODE=0 -CONFIG_SF_DEFAULT_SPEED=10000000 -CONFIG_SPI_FLASH_STMICRO=y -CONFIG_PHYLIB=y -CONFIG_PHY_AQUANTIA=y -CONFIG_PHY_REALTEK=y -CONFIG_E1000=y -CONFIG_FMAN_ENET=y -CONFIG_MII=y -CONFIG_DM_PCI=y -CONFIG_DM_PCI_COMPAT=y -CONFIG_PCIE_FSL=y -CONFIG_SYS_QE_FMAN_FW_IN_NOR=y -CONFIG_DM_RTC=y -CONFIG_SYS_NS16550=y -CONFIG_SPI=y -CONFIG_FSL_ESPI=y -CONFIG_USB=y -CONFIG_DM_USB=y diff --git a/include/configs/T102xRDB.h b/include/configs/T102xRDB.h deleted file mode 100644 index f5d9657444..0000000000 --- a/include/configs/T102xRDB.h +++ /dev/null @@ -1,721 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright 2014 Freescale Semiconductor, Inc. - * Copyright 2020 NXP - */ - -/* - * T1024/T1023 RDB board configuration file - */ - -#ifndef __T1024RDB_H -#define __T1024RDB_H - -#include <linux/stringify.h> - -/* High Level Configuration Options */ -#define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ -#define CONFIG_ENABLE_36BIT_PHYS - -#ifdef CONFIG_PHYS_64BIT -#define CONFIG_ADDR_MAP 1 -#define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */ -#endif - -#define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */ -#define CONFIG_SYS_NUM_CPC CONFIG_SYS_NUM_DDR_CTLRS - -#define CONFIG_ENV_OVERWRITE - -/* support deep sleep */ -#ifdef CONFIG_ARCH_T1024 -#define CONFIG_DEEP_SLEEP -#endif - -#ifdef CONFIG_RAMBOOT_PBL -#define CONFIG_SYS_FSL_PBL_PBI board/freescale/t102xrdb/t1024_pbi.cfg -#define CONFIG_SPL_FLUSH_IMAGE -#define CONFIG_SPL_PAD_TO 0x40000 -#define CONFIG_SPL_MAX_SIZE 0x28000 -#define RESET_VECTOR_OFFSET 0x27FFC -#define BOOT_PAGE_OFFSET 0x27000 -#ifdef CONFIG_SPL_BUILD -#define CONFIG_SPL_SKIP_RELOCATE -#define CONFIG_SPL_COMMON_INIT_DDR -#define CONFIG_SYS_CCSR_DO_NOT_RELOCATE -#endif - -#ifdef CONFIG_MTD_RAW_NAND -#define CONFIG_SYS_NAND_U_BOOT_SIZE (768 << 10) -#define CONFIG_SYS_NAND_U_BOOT_DST 0x30000000 -#define CONFIG_SYS_NAND_U_BOOT_START 0x30000000 -#define CONFIG_SYS_NAND_U_BOOT_OFFS (256 << 10) -#if defined(CONFIG_TARGET_T1024RDB) -#define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1024_nand_rcw.cfg -#elif defined(CONFIG_TARGET_T1023RDB) -#define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1023_nand_rcw.cfg -#endif -#endif - -#ifdef CONFIG_SPIFLASH -#define CONFIG_RESET_VECTOR_ADDRESS 0x30000FFC -#define CONFIG_SPL_SPI_FLASH_MINIMAL -#define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE (768 << 10) -#define CONFIG_SYS_SPI_FLASH_U_BOOT_DST (0x30000000) -#define CONFIG_SYS_SPI_FLASH_U_BOOT_START (0x30000000) -#define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS (256 << 10) -#ifndef CONFIG_SPL_BUILD -#define CONFIG_SYS_MPC85XX_NO_RESETVEC -#endif -#if defined(CONFIG_TARGET_T1024RDB) -#define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1024_spi_rcw.cfg -#elif defined(CONFIG_TARGET_T1023RDB) -#define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1023_spi_rcw.cfg -#endif -#endif - -#ifdef CONFIG_SDCARD -#define CONFIG_RESET_VECTOR_ADDRESS 0x30000FFC -#define CONFIG_SYS_MMC_U_BOOT_SIZE (768 << 10) -#define CONFIG_SYS_MMC_U_BOOT_DST (0x30000000) -#define CONFIG_SYS_MMC_U_BOOT_START (0x30000000) -#define CONFIG_SYS_MMC_U_BOOT_OFFS (260 << 10) -#ifndef CONFIG_SPL_BUILD -#define CONFIG_SYS_MPC85XX_NO_RESETVEC -#endif -#if defined(CONFIG_TARGET_T1024RDB) -#define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1024_sd_rcw.cfg -#elif defined(CONFIG_TARGET_T1023RDB) -#define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1023_sd_rcw.cfg -#endif -#endif - -#endif /* CONFIG_RAMBOOT_PBL */ - -#ifndef CONFIG_RESET_VECTOR_ADDRESS -#define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc -#endif - -/* PCIe Boot - Master */ -#define CONFIG_SRIO_PCIE_BOOT_MASTER -/* - * for slave u-boot IMAGE instored in master memory space, - * PHYS must be aligned based on the SIZE - */ -#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull -#define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x100000 /* 1M */ -#ifdef CONFIG_PHYS_64BIT -#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull -#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull -#else -#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xef200000 -#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0xfff00000 -#endif -/* - * for slave UCODE and ENV instored in master memory space, - * PHYS must be aligned based on the SIZE - */ -#ifdef CONFIG_PHYS_64BIT -#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull -#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull -#else -#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xef100000 -#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0xffe00000 -#endif -#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000 /* 256K */ -/* slave core release by master*/ -#define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4 -#define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */ - -/* PCIe Boot - Slave */ -#ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE -#define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000 -#define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \ - (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR) -/* Set 1M boot space for PCIe boot */ -#define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000) -#define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \ - (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR) -#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc -#endif - -#if defined(CONFIG_SPIFLASH) -#elif defined(CONFIG_SDCARD) -#define CONFIG_SYS_MMC_ENV_DEV 0 -#endif - -#ifndef __ASSEMBLY__ -unsigned long get_board_sys_clk(void); -unsigned long get_board_ddr_clk(void); -#endif - -#define CONFIG_SYS_CLK_FREQ 100000000 -#define CONFIG_DDR_CLK_FREQ 100000000 - -/* - * These can be toggled for performance analysis, otherwise use default. - */ -#define CONFIG_SYS_CACHE_STASHING -#define CONFIG_BACKSIDE_L2_CACHE -#define CONFIG_SYS_INIT_L2CSR0 L2CSR0_L2E -#define CONFIG_BTB /* toggle branch predition */ -#define CONFIG_DDR_ECC -#ifdef CONFIG_DDR_ECC -#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER -#define CONFIG_MEM_INIT_VALUE 0xdeadbeef -#endif - -/* - * Config the L3 Cache as L3 SRAM - */ -#define CONFIG_SYS_INIT_L3_ADDR 0xFFFC0000 -#define CONFIG_SYS_L3_SIZE (256 << 10) -#define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024) -#define SPL_ENV_ADDR (CONFIG_SPL_GD_ADDR + 4 * 1024) -#define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SPL_GD_ADDR + 12 * 1024) -#define CONFIG_SPL_RELOC_MALLOC_SIZE (30 << 10) -#define CONFIG_SPL_RELOC_STACK (CONFIG_SPL_GD_ADDR + 64 * 1024) - -#ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_DCSRBAR 0xf0000000 -#define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull -#endif - -/* EEPROM */ -#define CONFIG_ID_EEPROM -#define CONFIG_SYS_I2C_EEPROM_NXID -#define CONFIG_SYS_EEPROM_BUS_NUM 0 -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 - -/* - * DDR Setup - */ -#define CONFIG_VERY_BIG_RAM -#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE -#define CONFIG_DIMM_SLOTS_PER_CTLR 1 -#define CONFIG_CHIP_SELECTS_PER_CTRL (4 * CONFIG_DIMM_SLOTS_PER_CTLR) -#if defined(CONFIG_TARGET_T1024RDB) -#define CONFIG_DDR_SPD -#define CONFIG_SYS_SPD_BUS_NUM 0 -#define SPD_EEPROM_ADDRESS 0x51 -#define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */ -#elif defined(CONFIG_TARGET_T1023RDB) -#define CONFIG_SYS_DDR_RAW_TIMING -#define CONFIG_SYS_SDRAM_SIZE 2048 -#endif - -/* - * IFC Definitions - */ -#define CONFIG_SYS_FLASH_BASE 0xe8000000 -#ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE) -#else -#define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE -#endif - -#define CONFIG_SYS_NOR0_CSPR_EXT (0xf) -#define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ - CSPR_PORT_SIZE_16 | \ - CSPR_MSEL_NOR | \ - CSPR_V) -#define CONFIG_SYS_NOR_AMASK IFC_AMASK(128*1024*1024) - -/* NOR Flash Timing Params */ -#if defined(CONFIG_TARGET_T1024RDB) -#define CONFIG_SYS_NOR_CSOR CSOR_NAND_TRHZ_80 -#elif defined(CONFIG_TARGET_T1023RDB) -#define CONFIG_SYS_NOR_CSOR (CSOR_NOR_ADM_SHIFT(0) | \ - CSOR_NAND_TRHZ_80 | CSOR_NOR_ADM_SHFT_MODE_EN) -#endif -#define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \ - FTIM0_NOR_TEADC(0x5) | \ - FTIM0_NOR_TEAHC(0x5)) -#define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \ - FTIM1_NOR_TRAD_NOR(0x1A) |\ - FTIM1_NOR_TSEQRAD_NOR(0x13)) -#define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) | \ - FTIM2_NOR_TCH(0x4) | \ - FTIM2_NOR_TWPH(0x0E) | \ - FTIM2_NOR_TWP(0x1c)) -#define CONFIG_SYS_NOR_FTIM3 0x0 - -#define CONFIG_SYS_FLASH_QUIET_TEST -#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ - -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ -#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ - -#define CONFIG_SYS_FLASH_EMPTY_INFO -#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS} - -#ifdef CONFIG_TARGET_T1024RDB -/* CPLD on IFC */ -#define CONFIG_SYS_CPLD_BASE 0xffdf0000 -#define CONFIG_SYS_CPLD_BASE_PHYS (0xf00000000ull | CONFIG_SYS_CPLD_BASE) -#define CONFIG_SYS_CSPR2_EXT (0xf) -#define CONFIG_SYS_CSPR2 (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE) \ - | CSPR_PORT_SIZE_8 \ - | CSPR_MSEL_GPCM \ - | CSPR_V) -#define CONFIG_SYS_AMASK2 IFC_AMASK(64*1024) -#define CONFIG_SYS_CSOR2 0x0 - -/* CPLD Timing parameters for IFC CS2 */ -#define CONFIG_SYS_CS2_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ - FTIM0_GPCM_TEADC(0x0e) | \ - FTIM0_GPCM_TEAHC(0x0e)) -#define CONFIG_SYS_CS2_FTIM1 (FTIM1_GPCM_TACO(0x0e) | \ - FTIM1_GPCM_TRAD(0x1f)) -#define CONFIG_SYS_CS2_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \ - FTIM2_GPCM_TCH(0x8) | \ - FTIM2_GPCM_TWP(0x1f)) -#define CONFIG_SYS_CS2_FTIM3 0x0 -#endif - -/* NAND Flash on IFC */ -#define CONFIG_NAND_FSL_IFC -#define CONFIG_SYS_NAND_BASE 0xff800000 -#ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_NAND_BASE_PHYS (0xf00000000ull | CONFIG_SYS_NAND_BASE) -#else -#define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE -#endif -#define CONFIG_SYS_NAND_CSPR_EXT (0xf) -#define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ - | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \ - | CSPR_MSEL_NAND /* MSEL = NAND */ \ - | CSPR_V) -#define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024) - -#if defined(CONFIG_TARGET_T1024RDB) -#define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ - | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ - | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ - | CSOR_NAND_RAL_3 /* RAL = 3Byes */ \ - | CSOR_NAND_PGS_4K /* Page Size = 4K */ \ - | CSOR_NAND_SPRZ_224 /* Spare size = 224 */ \ - | CSOR_NAND_PB(64)) /*Pages Per Block = 64*/ -#define CONFIG_SYS_NAND_BLOCK_SIZE (512 * 1024) -#elif defined(CONFIG_TARGET_T1023RDB) -#define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ - | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ - | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ - | CSOR_NAND_RAL_3 /* RAL 3Bytes */ \ - | CSOR_NAND_PGS_2K /* Page Size = 2K */ \ - | CSOR_NAND_SPRZ_128 /* Spare size = 128 */ \ - | CSOR_NAND_PB(64)) /*Pages Per Block = 64*/ -#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) -#endif - -#define CONFIG_SYS_NAND_ONFI_DETECTION -/* ONFI NAND Flash mode0 Timing Params */ -#define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x07) | \ - FTIM0_NAND_TWP(0x18) | \ - FTIM0_NAND_TWCHT(0x07) | \ - FTIM0_NAND_TWH(0x0a)) -#define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32) | \ - FTIM1_NAND_TWBE(0x39) | \ - FTIM1_NAND_TRR(0x0e) | \ - FTIM1_NAND_TRP(0x18)) -#define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0f) | \ - FTIM2_NAND_TREH(0x0a) | \ - FTIM2_NAND_TWHRE(0x1e)) -#define CONFIG_SYS_NAND_FTIM3 0x0 - -#define CONFIG_SYS_NAND_DDR_LAW 11 -#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } -#define CONFIG_SYS_MAX_NAND_DEVICE 1 - -#if defined(CONFIG_MTD_RAW_NAND) -#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NAND_CSPR_EXT -#define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR -#define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK -#define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR -#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0 -#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1 -#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2 -#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3 -#define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR0_CSPR_EXT -#define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR0_CSPR -#define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK -#define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR -#define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0 -#define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1 -#define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2 -#define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3 -#else -#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT -#define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR -#define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK -#define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR -#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0 -#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1 -#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 -#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 -#define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NAND_CSPR_EXT -#define CONFIG_SYS_CSPR1 CONFIG_SYS_NAND_CSPR -#define CONFIG_SYS_AMASK1 CONFIG_SYS_NAND_AMASK -#define CONFIG_SYS_CSOR1 CONFIG_SYS_NAND_CSOR -#define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NAND_FTIM0 -#define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NAND_FTIM1 -#define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NAND_FTIM2 -#define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NAND_FTIM3 -#endif - -#ifdef CONFIG_SPL_BUILD -#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE -#else -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#endif - -#if defined(CONFIG_RAMBOOT_PBL) -#define CONFIG_SYS_RAMBOOT -#endif - -#define CONFIG_HWCONFIG - -/* define to use L1 as initial stack */ -#define CONFIG_L1_INIT_RAM -#define CONFIG_SYS_INIT_RAM_LOCK -#define CONFIG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */ -#ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW 0xfe03c000 -/* The assembler doesn't like typecast */ -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ - ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ - CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) -#else -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS 0xfe03c000 /* Initial L1 address */ -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0 -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS -#endif -#define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_MONITOR_LEN (768 * 1024) -#define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024) - -/* Serial Port */ -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE 1 -#define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)/2) - -#define CONFIG_SYS_BAUDRATE_TABLE \ - {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} - -#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500) -#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600) -#define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500) -#define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600) - -/* Video */ -#undef CONFIG_FSL_DIU_FB /* RDB doesn't support DIU */ -#ifdef CONFIG_FSL_DIU_FB -#define CONFIG_SYS_DIU_ADDR (CONFIG_SYS_CCSRBAR + 0x180000) -#define CONFIG_VIDEO_LOGO -#define CONFIG_VIDEO_BMP_LOGO -#define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS -/* - * With CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS, flash I/O is really slow, so - * disable empty flash sector detection, which is I/O-intensive. - */ -#undef CONFIG_SYS_FLASH_EMPTY_INFO -#endif - -/* I2C */ -#ifndef CONFIG_DM_I2C -#define CONFIG_SYS_I2C -#define CONFIG_SYS_FSL_I2C_SPEED 50000 /* I2C speed in Hz */ -#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F -#define CONFIG_SYS_FSL_I2C2_SPEED 50000 /* I2C speed in Hz */ -#define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F -#define CONFIG_SYS_FSL_I2C_OFFSET 0x118000 -#define CONFIG_SYS_FSL_I2C2_OFFSET 0x118100 -#else -#define CONFIG_I2C_SET_DEFAULT_BUS_NUM -#define CONFIG_I2C_DEFAULT_BUS_NUMBER 0 -#endif - -#define CONFIG_SYS_I2C_FSL /* Use FSL common I2C driver */ -#define I2C_PCA6408_BUS_NUM 1 -#define I2C_PCA6408_ADDR 0x20 - -/* I2C bus multiplexer */ -#define I2C_MUX_CH_DEFAULT 0x8 - -/* - * RTC configuration - */ -#define RTC -#define CONFIG_RTC_DS1337 1 -#define CONFIG_SYS_I2C_RTC_ADDR 0x68 - -/* - * eSPI - Enhanced SPI - */ - -/* - * General PCIe - * Memory space is mapped 1-1, but I/O space must start from 0. - */ -#define CONFIG_PCIE1 /* PCIE controller 1 */ -#define CONFIG_PCIE2 /* PCIE controller 2 */ -#define CONFIG_PCIE3 /* PCIE controller 3 */ -#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ - -#ifdef CONFIG_PCI -/* controller 1, direct to uli, tgtid 3, Base address 20000 */ -#ifdef CONFIG_PCIE1 -#define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 -#define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull -#define CONFIG_SYS_PCIE1_IO_VIRT 0xf8000000 -#define CONFIG_SYS_PCIE1_IO_PHYS 0xff8000000ull -#endif - -/* controller 2, Slot 2, tgtid 2, Base address 201000 */ -#ifdef CONFIG_PCIE2 -#define CONFIG_SYS_PCIE2_MEM_VIRT 0x90000000 -#define CONFIG_SYS_PCIE2_MEM_PHYS 0xc10000000ull -#define CONFIG_SYS_PCIE2_IO_VIRT 0xf8010000 -#define CONFIG_SYS_PCIE2_IO_PHYS 0xff8010000ull -#endif - -/* controller 3, Slot 1, tgtid 1, Base address 202000 */ -#ifdef CONFIG_PCIE3 -#define CONFIG_SYS_PCIE3_MEM_VIRT 0xa0000000 -#define CONFIG_SYS_PCIE3_MEM_PHYS 0xc20000000ull -#define CONFIG_SYS_PCIE3_IO_VIRT 0xf8020000 -#define CONFIG_SYS_PCIE3_IO_PHYS 0xff8020000ull -#endif - -#if !defined(CONFIG_DM_PCI) -#define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ -#define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 -#define CONFIG_SYS_PCIE1_MEM_SIZE 0x10000000 /* 256M */ -#define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 -#define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ -#define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000 -#define CONFIG_SYS_PCIE2_MEM_SIZE 0x10000000 /* 256M */ -#define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 -#define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ -#define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000 -#define CONFIG_SYS_PCIE3_MEM_SIZE 0x10000000 /* 256M */ -#define CONFIG_SYS_PCIE3_IO_BUS 0x00000000 -#define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ -#define CONFIG_PCI_INDIRECT_BRIDGE -#endif - -#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ -#endif /* CONFIG_PCI */ - -/* - * USB - */ -#define CONFIG_HAS_FSL_DR_USB - -#ifdef CONFIG_HAS_FSL_DR_USB -#define CONFIG_USB_EHCI_FSL -#define CONFIG_EHCI_HCD_INIT_AFTER_RESET -#endif - -/* - * SDHC - */ -#ifdef CONFIG_MMC -#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR -#endif - -/* Qman/Bman */ -#ifndef CONFIG_NOBQFMAN -#define CONFIG_SYS_BMAN_NUM_PORTALS 10 -#define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 -#ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull -#else -#define CONFIG_SYS_BMAN_MEM_PHYS CONFIG_SYS_BMAN_MEM_BASE -#endif -#define CONFIG_SYS_BMAN_MEM_SIZE 0x02000000 -#define CONFIG_SYS_BMAN_SP_CENA_SIZE 0x4000 -#define CONFIG_SYS_BMAN_SP_CINH_SIZE 0x1000 -#define CONFIG_SYS_BMAN_CENA_BASE CONFIG_SYS_BMAN_MEM_BASE -#define CONFIG_SYS_BMAN_CENA_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) -#define CONFIG_SYS_BMAN_CINH_BASE (CONFIG_SYS_BMAN_MEM_BASE + \ - CONFIG_SYS_BMAN_CENA_SIZE) -#define CONFIG_SYS_BMAN_CINH_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) -#define CONFIG_SYS_BMAN_SWP_ISDR_REG 0xE08 -#define CONFIG_SYS_QMAN_NUM_PORTALS 10 -#define CONFIG_SYS_QMAN_MEM_BASE 0xf6000000 -#ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_QMAN_MEM_PHYS 0xff6000000ull -#else -#define CONFIG_SYS_QMAN_MEM_PHYS CONFIG_SYS_QMAN_MEM_BASE -#endif -#define CONFIG_SYS_QMAN_MEM_SIZE 0x02000000 -#define CONFIG_SYS_QMAN_SP_CENA_SIZE 0x4000 -#define CONFIG_SYS_QMAN_SP_CINH_SIZE 0x1000 -#define CONFIG_SYS_QMAN_CENA_BASE CONFIG_SYS_QMAN_MEM_BASE -#define CONFIG_SYS_QMAN_CENA_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) -#define CONFIG_SYS_QMAN_CINH_BASE (CONFIG_SYS_QMAN_MEM_BASE + \ - CONFIG_SYS_QMAN_CENA_SIZE) -#define CONFIG_SYS_QMAN_CINH_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) -#define CONFIG_SYS_QMAN_SWP_ISDR_REG 0xE08 - -#define CONFIG_SYS_DPAA_FMAN - -/* Default address of microcode for the Linux FMan driver */ -#if defined(CONFIG_SPIFLASH) -/* - * env is stored at 0x100000, sector size is 0x10000, ucode is stored after - * env, so we got 0x110000. - */ -#define CONFIG_SYS_FMAN_FW_ADDR 0x110000 -#define CONFIG_SYS_QE_FW_ADDR 0x130000 -#elif defined(CONFIG_SDCARD) -/* - * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is - * about 1MB (2048 blocks), Env is stored after the image, and the env size is - * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080(0x820). - */ -#define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x820) -#define CONFIG_SYS_QE_FW_ADDR (512 * 0x920) -#elif defined(CONFIG_MTD_RAW_NAND) -#if defined(CONFIG_TARGET_T1024RDB) -#define CONFIG_SYS_FMAN_FW_ADDR (3 * CONFIG_SYS_NAND_BLOCK_SIZE) -#define CONFIG_SYS_QE_FW_ADDR (4 * CONFIG_SYS_NAND_BLOCK_SIZE) -#elif defined(CONFIG_TARGET_T1023RDB) -#define CONFIG_SYS_FMAN_FW_ADDR (11 * CONFIG_SYS_NAND_BLOCK_SIZE) -#define CONFIG_SYS_QE_FW_ADDR (12 * CONFIG_SYS_NAND_BLOCK_SIZE) -#endif -#elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) -/* - * Slave has no ucode locally, it can fetch this from remote. When implementing - * in two corenet boards, slave's ucode could be stored in master's memory - * space, the address can be mapped from slave TLB->slave LAW-> - * slave SRIO or PCIE outbound window->master inbound window-> - * master LAW->the ucode address in master's memory space. - */ -#define CONFIG_SYS_FMAN_FW_ADDR 0xFFE00000 -#else -#define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000 -#define CONFIG_SYS_QE_FW_ADDR 0xEFE00000 -#endif -#define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 -#define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) -#endif /* CONFIG_NOBQFMAN */ - -#ifdef CONFIG_SYS_DPAA_FMAN -#if defined(CONFIG_TARGET_T1024RDB) -#define RGMII_PHY1_ADDR 0x2 -#define RGMII_PHY2_ADDR 0x6 -#define SGMII_AQR_PHY_ADDR 0x2 -#define FM1_10GEC1_PHY_ADDR 0x1 -#elif defined(CONFIG_TARGET_T1023RDB) -#define RGMII_PHY1_ADDR 0x1 -#define SGMII_RTK_PHY_ADDR 0x3 -#define SGMII_AQR_PHY_ADDR 0x2 -#endif -#endif - -#ifdef CONFIG_FMAN_ENET -#define CONFIG_ETHPRIME "FM1@DTSEC4" -#endif - -/* - * Dynamic MTD Partition support with mtdparts - */ - -/* - * Environment - */ -#define CONFIG_LOADS_ECHO /* echo on for serial download */ -#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 64 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial map for Linux*/ -#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ - -#ifdef CONFIG_CMD_KGDB -#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#endif - -/* - * Environment Configuration - */ -#define CONFIG_ROOTPATH "/opt/nfsroot" -#define CONFIG_BOOTFILE "uImage" -#define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */ -#define CONFIG_LOADADDR 1000000 /* default location for tftp, bootm */ -#define __USB_PHY_TYPE utmi - -#ifdef CONFIG_ARCH_T1024 -#define CONFIG_BOARDNAME t1024rdb -#define BANK_INTLV cs0_cs1 -#else -#define CONFIG_BOARDNAME t1023rdb -#define BANK_INTLV null -#endif - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "hwconfig=fsl_ddr:ctlr_intlv=cacheline," \ - "bank_intlv=" __stringify(BANK_INTLV) "\0" \ - "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0" \ - "ramdiskfile=" __stringify(CONFIG_BOARDNAME) "/ramdisk.uboot\0" \ - "fdtfile=" __stringify(CONFIG_BOARDNAME) "/" \ - __stringify(CONFIG_BOARDNAME) ".dtb\0" \ - "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ - "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ - "bootargs=root=/dev/ram rw console=ttyS0,115200\0" \ - "netdev=eth0\0" \ - "tftpflash=tftpboot $loadaddr $uboot && " \ - "protect off $ubootaddr +$filesize && " \ - "erase $ubootaddr +$filesize && " \ - "cp.b $loadaddr $ubootaddr $filesize && " \ - "protect on $ubootaddr +$filesize && " \ - "cmp.b $loadaddr $ubootaddr $filesize\0" \ - "consoledev=ttyS0\0" \ - "ramdiskaddr=2000000\0" \ - "fdtaddr=1e00000\0" \ - "bdev=sda3\0" - -#define CONFIG_LINUX \ - "setenv bootargs root=/dev/ram rw " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "setenv ramdiskaddr 0x02000000;" \ - "setenv fdtaddr 0x00c00000;" \ - "setenv loadaddr 0x1000000;" \ - "bootm $loadaddr $ramdiskaddr $fdtaddr" - -#define CONFIG_NFSBOOTCOMMAND \ - "setenv bootargs root=/dev/nfs rw " \ - "nfsroot=$serverip:$rootpath " \ - "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr - $fdtaddr" - -#define CONFIG_BOOTCOMMAND CONFIG_LINUX - -#include <asm/fsl_secure_boot.h> - -#endif /* __T1024RDB_H */