Enable more functions/commands for arbel evb.
Signed-off-by: Jim Liu JJLIU0@nuvoton.com --- Changes for v2: --- no change --- configs/arbel_evb_defconfig | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-)
diff --git a/configs/arbel_evb_defconfig b/configs/arbel_evb_defconfig index 6cfb5a7d32..e2714d1e1a 100644 --- a/configs/arbel_evb_defconfig +++ b/configs/arbel_evb_defconfig @@ -4,6 +4,8 @@ CONFIG_TEXT_BASE=0x06208000 CONFIG_SYS_MALLOC_LEN=0x240000 CONFIG_SYS_MALLOC_F_LEN=0x1000 CONFIG_NR_DRAM_BANKS=2 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x06208000 CONFIG_ENV_SIZE=0x40000 CONFIG_ENV_OFFSET=0x3C0000 CONFIG_ENV_SECT_SIZE=0x1000 @@ -19,10 +21,12 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="run common_bootargs; run romboot" +CONFIG_LAST_STAGE_INIT=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="U-Boot>" CONFIG_SYS_MAXARGS=32 CONFIG_SYS_BOOTM_LEN=0x1400000 +CONFIG_CMD_MEMTEST=y CONFIG_CMD_FUSE=y CONFIG_CMD_GPIO=y CONFIG_CMD_GPT=y @@ -31,6 +35,7 @@ CONFIG_CMD_MMC=y CONFIG_CMD_PART=y CONFIG_CMD_SPI=y CONFIG_CMD_USB=y +CONFIG_CMD_USB_MASS_STORAGE=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y @@ -39,6 +44,7 @@ CONFIG_CMD_RNG=y CONFIG_CMD_UUID=y CONFIG_CMD_HASH=y CONFIG_CMD_TPM=y +CONFIG_CMD_EXT4=y CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y CONFIG_ENV_IS_IN_SPI_FLASH=y @@ -49,6 +55,7 @@ CONFIG_NPCM_AES=y CONFIG_NPCM_SHA=y CONFIG_NPCM_GPIO=y CONFIG_DM_I2C=y +CONFIG_SYS_I2C_NPCM=y # CONFIG_INPUT is not set CONFIG_MISC=y CONFIG_NPCM_HOST=y @@ -87,12 +94,17 @@ CONFIG_TPM2_FTPM_TEE=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_NPCM=y -CONFIG_USB_EHCI_GENERIC=y CONFIG_USB_OHCI_HCD=y -CONFIG_USB_OHCI_GENERIC=y CONFIG_USB_OHCI_NPCM=y CONFIG_USB_STORAGE=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_MANUFACTURER="Nuvoton" +CONFIG_USB_GADGET_VENDOR_NUM=0x0416 +CONFIG_USB_GADGET_PRODUCT_NUM=0xffff +CONFIG_CI_UDC=y +CONFIG_USB_GADGET_DOWNLOAD=y CONFIG_LIB_HW_RAND=y CONFIG_TPM=y CONFIG_SHA_HW_ACCEL=y # CONFIG_EFI_LOADER is not set +CONFIG_SYS_SKIP_UART_INIT=y