Hi Stefan,
On Mon, Feb 6, 2023 at 2:01 AM Stefan Roese sr@denx.de wrote:
Hi Tony,
On 2/5/23 22:28, Tony Dinh wrote:
Currently, only the 1st SATA port is powered up (by GPIO1 12). Add GPIO1 13 in board initialization to power up the 2nd SATA port.
Note that this patch depends on the initial add-support patch: https://patchwork.ozlabs.org/project/uboot/patch/20230201231306.7010-1-mibod...
Signed-off-by: Tony Dinh mibodhi@gmail.com
board/thecus/n2350/n2350.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/board/thecus/n2350/n2350.c b/board/thecus/n2350/n2350.c index 4cfdfba662..58028a0695 100644 --- a/board/thecus/n2350/n2350.c +++ b/board/thecus/n2350/n2350.c @@ -25,7 +25,7 @@ DECLARE_GLOBAL_DATA_PTR; #define N2350_GPP_OUT_ENA_LOW (~(BIT(20) | BIT(21) | BIT(24))) #define N2350_GPP_OUT_ENA_MID (~(BIT(12) | BIT(13) | BIT(16) | BIT(19) | BIT(22))) #define N2350_GPP_OUT_VAL_LOW 0x1200000 -#define N2350_GPP_OUT_VAL_MID 0x1001 +#define N2350_GPP_OUT_VAL_MID 0x3001
It's perhaps better to use (BIT(12) | ...) here as well. This makes it easier to see, which GPIOs are used IMHO.
Yes, I think so too, will send a V2 patch.
Thank, Tony