Hi Patrick,
On Thu, 26 Sept 2024 at 10:03, Patrick Rudolph patrick.rudolph@9elements.com wrote:
Add support for Arm sbsa [1] v0.3+ that is supported by QEMU [2].
Unlike other Arm based platforms the machine only provides a minimal FDT that contains number of CPUs, ammount of memory and machine-version. The boot firmware has to provide ACPI tables to the OS. Due to this design a full DTB is added here as well that allows U-Boot's driver to properly function. The DTB is appended at the end of the U-Boot image and will be merged with the QEMU provided DTB.
In addition provide documentation how to use, enable binman to fabricate both ROMs that are required to boot and add ACPI tables to make it full compatible to the EDK2 reference implementation.
The board was tested using Fedora 40 Aarch64 Workstation. It's able to boot from USB and AHCI or network.
Tested and found working:
- serial
- PCI
- xHCI
- Bochs display
- AHCI
- network using e1000e
- CPU init
- Booting Fedora 40
1: Server Base System Architecture (SBSA) 2: https://www.qemu.org/docs/master/system/arm/sbsa.html
Signed-off-by: Patrick Rudolph patrick.rudolph@9elements.com Cc: Peter Robinson pbrobinson@gmail.com Cc: Simon Glass sjg@chromium.org Cc: Tom Rini trini@konsulko.com
Changelog v3:
- Add GIC and GIC-ITS to devicetree
- Select GICv3 driver
- Drop acpi_fill_madt and use driver model instead
Changelog v4:
- Drop CPU platform code
- Enhance the DT to allow MADT generation from DT
Changelog v5:
- Add full DT and place it at the end of U-Boot
- Merge DT with QEMU's DT
- Drop DT generation code
- Fix flash region length
- Drop enable_caches()
- Support platforms that do not pass FDT in x0
arch/arm/Kconfig | 3 +- arch/arm/dts/qemu-sbsa.dts | 138 ++++++ arch/arm/include/asm/arch-qemu-sbsa/boot0.h | 34 ++ arch/arm/mach-qemu/Kconfig | 36 +- board/emulation/qemu-arm/MAINTAINERS | 2 + board/emulation/qemu-sbsa/Kconfig | 59 +++ board/emulation/qemu-sbsa/Makefile | 8 + board/emulation/qemu-sbsa/acpi.c | 193 ++++++++ board/emulation/qemu-sbsa/dsdt.asl | 483 ++++++++++++++++++++ board/emulation/qemu-sbsa/lowlevel_init.S | 22 + board/emulation/qemu-sbsa/qemu-sbsa.c | 312 +++++++++++++ board/emulation/qemu-sbsa/qemu-sbsa.env | 14 + board/emulation/qemu-sbsa/qemu-sbsa.h | 38 ++ board/emulation/qemu-sbsa/smc.c | 72 +++ configs/qemu-arm-sbsa_defconfig | 10 + doc/board/emulation/index.rst | 1 + doc/board/emulation/qemu-sbsa.rst | 98 ++++ doc/develop/driver-model/virtio.rst | 1 + include/configs/qemu-sbsa.h | 104 +++++ 19 files changed, 1621 insertions(+), 7 deletions(-) create mode 100644 arch/arm/dts/qemu-sbsa.dts create mode 100644 arch/arm/include/asm/arch-qemu-sbsa/boot0.h create mode 100644 board/emulation/qemu-sbsa/Kconfig create mode 100644 board/emulation/qemu-sbsa/Makefile create mode 100644 board/emulation/qemu-sbsa/acpi.c create mode 100644 board/emulation/qemu-sbsa/dsdt.asl create mode 100644 board/emulation/qemu-sbsa/lowlevel_init.S create mode 100644 board/emulation/qemu-sbsa/qemu-sbsa.c create mode 100644 board/emulation/qemu-sbsa/qemu-sbsa.env create mode 100644 board/emulation/qemu-sbsa/qemu-sbsa.h create mode 100644 board/emulation/qemu-sbsa/smc.c create mode 100644 configs/qemu-arm-sbsa_defconfig create mode 100644 doc/board/emulation/qemu-sbsa.rst create mode 100644 include/configs/qemu-sbsa.h
Please check the header order throughout E.g. board/emulation/qemu-sbsa/qemu-sbsa.c is still incorrect
You should not need to include 'config.h' as kconfig is included by default?
Do you need to add all the CFG items? Are they present in the devicetree?
For Binman the default pad-byte is 0, so you can drop those lines.
Reviewed-by: Simon Glass sjg@chromium.org
Regards, Simon