This serves no purpose now since we can write CONFIG_FOO instead of CONFIG_VAL(FOO)
Drop it.
Signed-off-by: Simon Glass sjg@chromium.org ---
(no changes since v1)
arch/arm/lib/bdinfo.c | 4 +- arch/arm/mach-at91/arm926ejs/eflash.c | 4 +- arch/arm/mach-k3/am654_init.c | 2 +- .../arm/mach-uniphier/debug-uart/debug-uart.c | 4 +- arch/mips/cpu/start.S | 6 +-- arch/mips/mach-mtmips/mt7621/spl/start.S | 6 +-- arch/powerpc/cpu/mpc83xx/start.S | 6 +-- arch/powerpc/cpu/mpc85xx/start.S | 40 +++++++++---------- arch/sandbox/cpu/start.c | 2 +- arch/sh/lib/start.S | 4 +- arch/x86/cpu/apollolake/cpu_common.c | 2 +- board/eets/pdu001/board.c | 2 +- board/freescale/p1010rdb/spl.c | 10 ++--- board/freescale/p1_p2_rdb_pc/spl.c | 10 ++--- board/samsung/common/board.c | 2 +- boot/image-fit-sig.c | 2 +- boot/vbe_simple_fw.c | 2 +- common/board_f.c | 4 +- common/board_r.c | 2 +- common/bootstage.c | 2 +- common/console.c | 12 +++--- common/dlmalloc.c | 14 +++---- common/init/board_init.c | 12 +++--- common/malloc_simple.c | 2 +- common/spl/spl.c | 16 ++++---- common/spl/spl_mmc.c | 2 +- drivers/mmc/mmc.c | 2 +- drivers/serial/altera_jtag_uart.c | 2 +- drivers/serial/altera_uart.c | 4 +- drivers/serial/atmel_usart.c | 4 +- drivers/serial/ns16550.c | 4 +- drivers/serial/serial_ar933x.c | 4 +- drivers/serial/serial_arc.c | 4 +- drivers/serial/serial_bcm6345.c | 4 +- drivers/serial/serial_linflexuart.c | 4 +- drivers/serial/serial_meson.c | 2 +- drivers/serial/serial_msm_geni.c | 6 +-- drivers/serial/serial_mt7620.c | 4 +- drivers/serial/serial_mtk.c | 5 +-- drivers/serial/serial_mvebu_a3700.c | 4 +- drivers/serial/serial_mxc.c | 4 +- drivers/serial/serial_omap.c | 4 +- drivers/serial/serial_pic32.c | 4 +- drivers/serial/serial_pl01x.c | 4 +- drivers/serial/serial_s5p.c | 4 +- drivers/serial/serial_sifive.c | 4 +- drivers/serial/serial_stm32.c | 4 +- drivers/serial/serial_xuartlite.c | 4 +- drivers/serial/serial_zynq.c | 4 +- include/asm-generic/global_data.h | 2 +- include/dm/device_compat.h | 2 +- include/linux/kconfig.h | 4 -- include/log.h | 2 +- lib/asm-offsets.c | 2 +- lib/efi/efi_app.c | 2 +- lib/fdtdec.c | 4 +- scripts/basic/fixdep.c | 2 +- 57 files changed, 139 insertions(+), 144 deletions(-)
diff --git a/arch/arm/lib/bdinfo.c b/arch/arm/lib/bdinfo.c index e62a13a3b96..06cce862b6b 100644 --- a/arch/arm/lib/bdinfo.c +++ b/arch/arm/lib/bdinfo.c @@ -57,8 +57,8 @@ void arch_print_bdinfo(void) #ifdef CONFIG_BOARD_TYPES printf("Board Type = %ld\n", gd->board_type); #endif -#if CONFIG_VAL(SYS_MALLOC_F_LEN) +#if CONFIG_SYS_MALLOC_F_LEN printf("Early malloc usage: %lx / %x\n", gd->malloc_ptr, - CONFIG_VAL(SYS_MALLOC_F_LEN)); + CONFIG_SYS_MALLOC_F_LEN); #endif } diff --git a/arch/arm/mach-at91/arm926ejs/eflash.c b/arch/arm/mach-at91/arm926ejs/eflash.c index aade13cc014..dff69f4133d 100644 --- a/arch/arm/mach-at91/arm926ejs/eflash.c +++ b/arch/arm/mach-at91/arm926ejs/eflash.c @@ -121,7 +121,7 @@ unsigned long flash_init(void) if (i%32 == 0) tmp = readl(&eefc->frr); flash_info[0].protect[i] = (tmp >> (i%32)) & 1; -#if CONFIG_VAL(EFLASH_PROTSECTORS) +#if CONFIG_EFLASH_PROTSECTORS if (i < CONFIG_EFLASH_PROTSECTORS) flash_info[0].protect[i] = 1; #endif @@ -159,7 +159,7 @@ int flash_real_protect (flash_info_t *info, long sector, int prot)
debug("protect sector=%ld prot=%d\n", sector, prot);
-#if CONFIG_VAL(EFLASH_PROTSECTORS) +#if CONFIG_EFLASH_PROTSECTORS if (sector < CONFIG_EFLASH_PROTSECTORS) { if (!prot) { printf("eflash: sector %lu cannot be unprotected\n", diff --git a/arch/arm/mach-k3/am654_init.c b/arch/arm/mach-k3/am654_init.c index cc645289ae3..83632c68118 100644 --- a/arch/arm/mach-k3/am654_init.c +++ b/arch/arm/mach-k3/am654_init.c @@ -204,7 +204,7 @@ void board_init_f(ulong dummy) * new malloc area inside the currently active pre-relocation "first" * malloc pool of which we use all that's left. */ - pool_size = CONFIG_VAL(SYS_MALLOC_F_LEN) - gd->malloc_ptr; + pool_size = CONFIG_SYS_MALLOC_F_LEN - gd->malloc_ptr; pool_addr = malloc(pool_size); if (!pool_addr) panic("ERROR: Can't allocate full malloc pool!\n"); diff --git a/arch/arm/mach-uniphier/debug-uart/debug-uart.c b/arch/arm/mach-uniphier/debug-uart/debug-uart.c index 1ba012ca45d..d116d46812d 100644 --- a/arch/arm/mach-uniphier/debug-uart/debug-uart.c +++ b/arch/arm/mach-uniphier/debug-uart/debug-uart.c @@ -18,7 +18,7 @@
static void _debug_uart_putc(int c) { - void __iomem *base = (void __iomem *)CONFIG_VAL(DEBUG_UART_BASE); + void __iomem *base = (void __iomem *)CONFIG_DEBUG_UART_BASE;
while (!(readl(base + UNIPHIER_UART_LSR) & UART_LSR_THRE)) ; @@ -57,7 +57,7 @@ void sg_set_iectrl(unsigned int pin) void _debug_uart_init(void) { #ifdef CONFIG_SPL_BUILD - void __iomem *base = (void __iomem *)CONFIG_VAL(DEBUG_UART_BASE); + void __iomem *base = (void __iomem *)CONFIG_DEBUG_UART_BASE; unsigned int divisor;
switch (uniphier_get_soc_id()) { diff --git a/arch/mips/cpu/start.S b/arch/mips/cpu/start.S index c89118c24e3..dd94a5c5ad8 100644 --- a/arch/mips/cpu/start.S +++ b/arch/mips/cpu/start.S @@ -46,9 +46,9 @@ sp, sp, GD_SIZE # reserve space for gd and sp, sp, t0 # force 16 byte alignment move k0, sp # save gd pointer -#if CONFIG_VAL(SYS_MALLOC_F_LEN) && \ +#if CONFIG_SYS_MALLOC_F_LEN && \ !IS_ENABLED(CONFIG_INIT_STACK_WITHOUT_MALLOC_F) - li t2, CONFIG_VAL(SYS_MALLOC_F_LEN) + li t2, CONFIG_SYS_MALLOC_F_LEN PTR_SUBU \ sp, sp, t2 # reserve space for early malloc and sp, sp, t0 # force 16 byte alignment @@ -63,7 +63,7 @@ blt t0, t1, 1b nop
-#if CONFIG_VAL(SYS_MALLOC_F_LEN) && \ +#if CONFIG_SYS_MALLOC_F_LEN && \ !IS_ENABLED(CONFIG_INIT_STACK_WITHOUT_MALLOC_F) PTR_S sp, GD_MALLOC_BASE(k0) # gd->malloc_base offset #endif diff --git a/arch/mips/mach-mtmips/mt7621/spl/start.S b/arch/mips/mach-mtmips/mt7621/spl/start.S index 3bd6a989115..a4bc0b7e816 100644 --- a/arch/mips/mach-mtmips/mt7621/spl/start.S +++ b/arch/mips/mach-mtmips/mt7621/spl/start.S @@ -37,9 +37,9 @@ sp, sp, GD_SIZE # reserve space for gd and sp, sp, t0 # force 16 byte alignment move k0, sp # save gd pointer -#if CONFIG_VAL(SYS_MALLOC_F_LEN) && \ +#if CONFIG_SYS_MALLOC_F_LEN && \ !IS_ENABLED(CONFIG_INIT_STACK_WITHOUT_MALLOC_F) - li t2, CONFIG_VAL(SYS_MALLOC_F_LEN) + li t2, CONFIG_SYS_MALLOC_F_LEN PTR_SUBU \ sp, sp, t2 # reserve space for early malloc and sp, sp, t0 # force 16 byte alignment @@ -54,7 +54,7 @@ blt t0, t1, 1b nop
-#if CONFIG_VAL(SYS_MALLOC_F_LEN) && \ +#if CONFIG_SYS_MALLOC_F_LEN && \ !IS_ENABLED(CONFIG_INIT_STACK_WITHOUT_MALLOC_F) PTR_S sp, GD_MALLOC_BASE(k0) # gd->malloc_base offset #endif diff --git a/arch/powerpc/cpu/mpc83xx/start.S b/arch/powerpc/cpu/mpc83xx/start.S index 361b975c661..e7534625a21 100644 --- a/arch/powerpc/cpu/mpc83xx/start.S +++ b/arch/powerpc/cpu/mpc83xx/start.S @@ -244,14 +244,14 @@ in_flash: cmplw r3, r4 bne 1b
-#if CONFIG_VAL(SYS_MALLOC_F_LEN) +#if CONFIG_SYS_MALLOC_F_LEN
-#if CONFIG_VAL(SYS_MALLOC_F_LEN) + GENERATED_GBL_DATA_SIZE > CFG_SYS_INIT_RAM_SIZE +#if CONFIG_SYS_MALLOC_F_LEN + GENERATED_GBL_DATA_SIZE > CFG_SYS_INIT_RAM_SIZE #error "SYS_MALLOC_F_LEN too large to fit into initial RAM." #endif
/* r3 = new stack pointer / pre-reloc malloc area */ - subi r3, r3, CONFIG_VAL(SYS_MALLOC_F_LEN) + subi r3, r3, CONFIG_SYS_MALLOC_F_LEN
/* Set pointer to pre-reloc malloc area in GD */ stw r3, GD_MALLOC_BASE(r4) diff --git a/arch/powerpc/cpu/mpc85xx/start.S b/arch/powerpc/cpu/mpc85xx/start.S index 62afacd1ccf..7b2c044a777 100644 --- a/arch/powerpc/cpu/mpc85xx/start.S +++ b/arch/powerpc/cpu/mpc85xx/start.S @@ -341,7 +341,7 @@ l2_disabled: /* Interrupt vectors do not fit in minimal SPL. */ #if !defined(MINIMAL_SPL) /* Setup interrupt vectors */ - lis r1,CONFIG_VAL(SYS_MONITOR_BASE)@h + lis r1,CONFIG_SYS_MONITOR_BASE@h mtspr IVPR,r1
li r4,CriticalInput@l @@ -544,7 +544,7 @@ nexti: mflr r1 /* R1 = our PC */ */ create_tlb1_entry CONFIG_SYS_PPC_E500_DEBUG_TLB, \ 0, BOOKE_PAGESZ_4M, \ - CONFIG_VAL(SYS_MONITOR_BASE) & 0xffc00000, MAS2_I|MAS2_G, \ + CONFIG_SYS_MONITOR_BASE & 0xffc00000, MAS2_I|MAS2_G, \ 0xffc00000, MAS3_SX|MAS3_SW|MAS3_SR, \ 0, r6
@@ -555,8 +555,8 @@ nexti: mflr r1 /* R1 = our PC */ */ create_tlb1_entry CONFIG_SYS_PPC_E500_DEBUG_TLB, \ 0, BOOKE_PAGESZ_256K, \ - CONFIG_VAL(SYS_MONITOR_BASE) & 0xfffc0000, MAS2_I, \ - CONFIG_VAL(SYS_MONITOR_BASE) & 0xfffc0000, MAS3_SX|MAS3_SW|MAS3_SR, \ + CONFIG_SYS_MONITOR_BASE & 0xfffc0000, MAS2_I, \ + CONFIG_SYS_MONITOR_BASE & 0xfffc0000, MAS3_SX|MAS3_SW|MAS3_SR, \ 0, r6 #endif #endif @@ -1121,7 +1121,7 @@ create_init_ram_area: /* create a temp mapping in AS=1 to the 4M boot window */ create_tlb1_entry 15, \ 1, BOOKE_PAGESZ_4M, \ - CONFIG_VAL(SYS_MONITOR_BASE) & 0xffc00000, MAS2_I|MAS2_G, \ + CONFIG_SYS_MONITOR_BASE & 0xffc00000, MAS2_I|MAS2_G, \ 0xffc00000, MAS3_SX|MAS3_SW|MAS3_SR, \ 0, r6
@@ -1131,7 +1131,7 @@ create_init_ram_area: */ create_tlb1_entry 15, \ 1, BOOKE_PAGESZ_1M, \ - CONFIG_VAL(SYS_MONITOR_BASE) & 0xfff00000, MAS2_I|MAS2_G, \ + CONFIG_SYS_MONITOR_BASE & 0xfff00000, MAS2_I|MAS2_G, \ CFG_SYS_PBI_FLASH_WINDOW & 0xfff00000, MAS3_SX|MAS3_SW|MAS3_SR, \ 0, r6
@@ -1142,24 +1142,24 @@ create_init_ram_area: */ #elif defined(CONFIG_RAMBOOT_PBL) && defined(CONFIG_NXP_ESBC) && \ (!defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD)) - /* create a temp mapping in AS = 1 for mapping CONFIG_VAL(SYS_MONITOR_BASE) + /* create a temp mapping in AS = 1 for mapping CONFIG_SYS_MONITOR_BASE * to L3 Address configured by PBL for ISBC code */ create_tlb1_entry 15, \ 1, BOOKE_PAGESZ_1M, \ - CONFIG_VAL(SYS_MONITOR_BASE) & 0xfff00000, MAS2_I|MAS2_G, \ + CONFIG_SYS_MONITOR_BASE & 0xfff00000, MAS2_I|MAS2_G, \ CFG_SYS_INIT_L3_ADDR & 0xfff00000, MAS3_SX|MAS3_SW|MAS3_SR, \ 0, r6
#else /* - * create a temp mapping in AS=1 to the 1M CONFIG_VAL(SYS_MONITOR_BASE) space, the main - * image has been relocated to CONFIG_VAL(SYS_MONITOR_BASE) on the second stage. + * create a temp mapping in AS=1 to the 1M CONFIG_SYS_MONITOR_BASE space, the main + * image has been relocated to CONFIG_SYS_MONITOR_BASE on the second stage. */ create_tlb1_entry 15, \ 1, BOOKE_PAGESZ_1M, \ - CONFIG_VAL(SYS_MONITOR_BASE) & 0xfff00000, MAS2_I|MAS2_G, \ - CONFIG_VAL(SYS_MONITOR_BASE) & 0xfff00000, MAS3_SX|MAS3_SW|MAS3_SR, \ + CONFIG_SYS_MONITOR_BASE & 0xfff00000, MAS2_I|MAS2_G, \ + CONFIG_SYS_MONITOR_BASE & 0xfff00000, MAS3_SX|MAS3_SW|MAS3_SR, \ 0, r6 #endif
@@ -1233,13 +1233,13 @@ _start_cont: lis r3,(CFG_SYS_INIT_RAM_ADDR)@h ori r3,r3,((CFG_SYS_INIT_SP_OFFSET-16)&~0xf)@l /* Align to 16 */
-#if CONFIG_VAL(SYS_MALLOC_F_LEN) -#if CONFIG_VAL(SYS_MALLOC_F_LEN) + GENERATED_GBL_DATA_SIZE > CFG_SYS_INIT_RAM_SIZE +#if CONFIG_SYS_MALLOC_F_LEN +#if CONFIG_SYS_MALLOC_F_LEN + GENERATED_GBL_DATA_SIZE > CFG_SYS_INIT_RAM_SIZE #error "SYS_MALLOC_F_LEN too large to fit into initial RAM." #endif
/* Leave 16+ byte for back chain termination and NULL return address */ - subi r3,r3,((CONFIG_VAL(SYS_MALLOC_F_LEN)+16+15)&~0xf) + subi r3,r3,((CONFIG_SYS_MALLOC_F_LEN+16+15)&~0xf) #endif
/* End of RAM */ @@ -1253,7 +1253,7 @@ _start_cont: cmplw r4,r3 bne 1b
-#if CONFIG_VAL(SYS_MALLOC_F_LEN) +#if CONFIG_SYS_MALLOC_F_LEN lis r4,SYS_INIT_SP_ADDR@h ori r4,r4,SYS_INIT_SP_ADDR@l
@@ -1619,8 +1619,8 @@ relocate_code: GET_GOT #ifndef CONFIG_SPL_SKIP_RELOCATE mr r3,r5 /* Destination Address */ - lis r4,CONFIG_VAL(SYS_MONITOR_BASE)@h /* Source Address */ - ori r4,r4,CONFIG_VAL(SYS_MONITOR_BASE)@l + lis r4,CONFIG_SYS_MONITOR_BASE@h /* Source Address */ + ori r4,r4,CONFIG_SYS_MONITOR_BASE@l lwz r5,GOT(__init_end) sub r5,r5,r4 li r6,CONFIG_SYS_CACHELINE_SIZE /* Cache Line Size */ @@ -1628,7 +1628,7 @@ relocate_code: /* * Fix GOT pointer: * - * New GOT-PTR = (old GOT-PTR - CONFIG_VAL(SYS_MONITOR_BASE)) + Destination Address + * New GOT-PTR = (old GOT-PTR - CONFIG_SYS_MONITOR_BASE) + Destination Address * * Offset: */ @@ -1693,7 +1693,7 @@ relocate_code: * initialization, now running from RAM. */
- addi r0,r10,in_ram - CONFIG_VAL(SYS_MONITOR_BASE) + addi r0,r10,in_ram - CONFIG_SYS_MONITOR_BASE
/* * As IVPR is going to point RAM address, diff --git a/arch/sandbox/cpu/start.c b/arch/sandbox/cpu/start.c index e0c5db2a522..856dfbb9962 100644 --- a/arch/sandbox/cpu/start.c +++ b/arch/sandbox/cpu/start.c @@ -534,7 +534,7 @@ int sandbox_main(int argc, char *argv[]) goto err; }
-#if CONFIG_VAL(SYS_MALLOC_F_LEN) +#if CONFIG_SYS_MALLOC_F_LEN gd->malloc_base = CFG_MALLOC_F_ADDR; #endif #if IS_ENABLED(CONFIG_LOG) diff --git a/arch/sh/lib/start.S b/arch/sh/lib/start.S index ddb9aa9f87b..6777429ee29 100644 --- a/arch/sh/lib/start.S +++ b/arch/sh/lib/start.S @@ -53,7 +53,7 @@ _start:
mov.l ._gd_init, r13 /* global data */ mov.l ._stack_init, r15 /* stack */ -#if CONFIG_VAL(SYS_MALLOC_F_LEN) +#if CONFIG_SYS_MALLOC_F_LEN mov.l ._gd_malloc_base, r14 mov.l r15, @r14 #endif @@ -73,7 +73,7 @@ loop: ._bss_start: .long bss_start ._bss_end: .long bss_end ._gd_init: .long (_start - GENERATED_GBL_DATA_SIZE) -#if CONFIG_VAL(SYS_MALLOC_F_LEN) +#if CONFIG_SYS_MALLOC_F_LEN ._gd_malloc_base: .long (_start - GENERATED_GBL_DATA_SIZE + GD_MALLOC_BASE) #endif ._stack_init: .long (_start - GENERATED_GBL_DATA_SIZE - CONFIG_SYS_MALLOC_LEN - 16) diff --git a/arch/x86/cpu/apollolake/cpu_common.c b/arch/x86/cpu/apollolake/cpu_common.c index 9a5502617bf..5d7d26b140f 100644 --- a/arch/x86/cpu/apollolake/cpu_common.c +++ b/arch/x86/cpu/apollolake/cpu_common.c @@ -72,7 +72,7 @@ static void pch_uart_init(void) }
#ifdef CONFIG_DEBUG_UART - apl_uart_init(PCH_DEV_UART, CONFIG_VAL(DEBUG_UART_BASE)); + apl_uart_init(PCH_DEV_UART, CONFIG_DEBUG_UART_BASE); #endif }
diff --git a/board/eets/pdu001/board.c b/board/eets/pdu001/board.c index 15ee65b5354..79236c968ab 100644 --- a/board/eets/pdu001/board.c +++ b/board/eets/pdu001/board.c @@ -273,7 +273,7 @@ void board_debug_uart_init(void) setup_early_clocks();
/* done by pin controller driver if not debugging */ - enable_uart_pin_mux(CONFIG_VAL(DEBUG_UART_BASE)); + enable_uart_pin_mux(CONFIG_DEBUG_UART_BASE); } #endif
diff --git a/board/freescale/p1010rdb/spl.c b/board/freescale/p1010rdb/spl.c index 461ba372417..873db59de9c 100644 --- a/board/freescale/p1010rdb/spl.c +++ b/board/freescale/p1010rdb/spl.c @@ -57,24 +57,24 @@ void board_init_f(ulong bootflag) /* NOTE - code has to be copied out of NAND buffer before * other blocks can be read. */ - relocate_code(CONFIG_VAL(RELOC_STACK), 0, CONFIG_SPL_RELOC_TEXT_BASE); + relocate_code(CONFIG_RELOC_STACK, 0, CONFIG_SPL_RELOC_TEXT_BASE); }
void board_init_r(gd_t *gd, ulong dest_addr) { /* Pointer is writable since we allocated a register for it */ - gd = (gd_t *)CONFIG_VAL(GD_ADDR); + gd = (gd_t *)CONFIG_GD_ADDR; struct bd_info *bd;
memset(gd, 0, sizeof(gd_t)); - bd = (struct bd_info *)(CONFIG_VAL(GD_ADDR) + sizeof(gd_t)); + bd = (struct bd_info *)(CONFIG_GD_ADDR + sizeof(gd_t)); memset(bd, 0, sizeof(struct bd_info)); gd->bd = bd;
arch_cpu_init(); get_clocks(); - mem_malloc_init(CONFIG_VAL(RELOC_MALLOC_ADDR), - CONFIG_VAL(RELOC_MALLOC_SIZE)); + mem_malloc_init(CONFIG_RELOC_MALLOC_ADDR, + CONFIG_RELOC_MALLOC_SIZE); gd->flags |= GD_FLG_FULL_MALLOC_INIT;
#ifndef CONFIG_SPL_NAND_BOOT diff --git a/board/freescale/p1_p2_rdb_pc/spl.c b/board/freescale/p1_p2_rdb_pc/spl.c index 940cf6d7e4d..679e5f6d224 100644 --- a/board/freescale/p1_p2_rdb_pc/spl.c +++ b/board/freescale/p1_p2_rdb_pc/spl.c @@ -69,24 +69,24 @@ void board_init_f(ulong bootflag) /* NOTE - code has to be copied out of NAND buffer before * other blocks can be read. */ - relocate_code(CONFIG_VAL(RELOC_STACK), 0, CONFIG_SPL_RELOC_TEXT_BASE); + relocate_code(CONFIG_RELOC_STACK, 0, CONFIG_SPL_RELOC_TEXT_BASE); }
void board_init_r(gd_t *gd, ulong dest_addr) { /* Pointer is writable since we allocated a register for it */ - gd = (gd_t *)CONFIG_VAL(GD_ADDR); + gd = (gd_t *)CONFIG_GD_ADDR; struct bd_info *bd;
memset(gd, 0, sizeof(gd_t)); - bd = (struct bd_info *)(CONFIG_VAL(GD_ADDR) + sizeof(gd_t)); + bd = (struct bd_info *)(CONFIG_GD_ADDR + sizeof(gd_t)); memset(bd, 0, sizeof(struct bd_info)); gd->bd = bd;
arch_cpu_init(); get_clocks(); - mem_malloc_init(CONFIG_VAL(RELOC_MALLOC_ADDR), - CONFIG_VAL(RELOC_MALLOC_SIZE)); + mem_malloc_init(CONFIG_RELOC_MALLOC_ADDR, + CONFIG_RELOC_MALLOC_SIZE); gd->flags |= GD_FLG_FULL_MALLOC_INIT;
#ifdef CONFIG_SPL_ENV_SUPPORT diff --git a/board/samsung/common/board.c b/board/samsung/common/board.c index 07ec059437b..9bca5894737 100644 --- a/board/samsung/common/board.c +++ b/board/samsung/common/board.c @@ -106,7 +106,7 @@ int board_init(void) } boot_temp_check(); #endif -#if CONFIG_VAL(SYS_MEM_TOP_HIDE) +#if CONFIG_SYS_MEM_TOP_HIDE /* The last few MB of memory can be reserved for secure firmware */ ulong size = CONFIG_SYS_MEM_TOP_HIDE;
diff --git a/boot/image-fit-sig.c b/boot/image-fit-sig.c index 12369896fe3..96e65d559ec 100644 --- a/boot/image-fit-sig.c +++ b/boot/image-fit-sig.c @@ -71,7 +71,7 @@ static int fit_image_setup_verify(struct image_sign_info *info, const char *algo_name; const char *padding_name;
- if (fdt_totalsize(fit) > CONFIG_VAL(FIT_SIGNATURE_MAX_SIZE)) { + if (fdt_totalsize(fit) > CONFIG_FIT_SIGNATURE_MAX_SIZE) { *err_msgp = "Total size too large"; return 1; } diff --git a/boot/vbe_simple_fw.c b/boot/vbe_simple_fw.c index d59a704ddba..00092db76f4 100644 --- a/boot/vbe_simple_fw.c +++ b/boot/vbe_simple_fw.c @@ -80,7 +80,7 @@ int vbe_simple_read_bootflow_fw(struct udevice *dev, struct bootflow *bflow) * Load the FIT into the SPL memory. This is typically a FIT with * external data, so this is quite small, perhaps a few KB. */ - addr = CONFIG_VAL(TEXT_BASE); + addr = CONFIG_TEXT_BASE; buf = map_sysmem(addr, size); num_blks = DIV_ROUND_UP(size, desc->blksz); log_debug("read %lx, %lx blocks to %lx / %p\n", size, num_blks, addr, diff --git a/common/board_f.c b/common/board_f.c index 57fe9486a57..718e4cd514a 100644 --- a/common/board_f.c +++ b/common/board_f.c @@ -356,7 +356,7 @@ static int setup_dest_addr(void) * Ram is setup, size stored in gd !! */ debug("Ram size: %08llX\n", (unsigned long long)gd->ram_size); -#if CONFIG_VAL(SYS_MEM_TOP_HIDE) +#if CONFIG_SYS_MEM_TOP_HIDE /* * Subtract specified amount of memory to hide so that it won't * get "touched" at all by U-Boot. By fixing up gd->ram_size @@ -788,7 +788,7 @@ static int initf_bootstage(void)
static int initf_dm(void) { -#if defined(CONFIG_DM) && CONFIG_VAL(SYS_MALLOC_F_LEN) +#if defined(CONFIG_DM) && CONFIG_SYS_MALLOC_F_LEN int ret;
bootstage_start(BOOTSTAGE_ID_ACCUM_DM_F, "dm_f"); diff --git a/common/board_r.c b/common/board_r.c index 9430207aa0f..fb34b7beace 100644 --- a/common/board_r.c +++ b/common/board_r.c @@ -198,7 +198,7 @@ static int initr_malloc(void) { ulong malloc_start;
-#if CONFIG_VAL(SYS_MALLOC_F_LEN) +#if CONFIG_SYS_MALLOC_F_LEN debug("Pre-reloc malloc() used %#lx bytes (%ld KB)\n", gd->malloc_ptr, gd->malloc_ptr / 1024); #endif diff --git a/common/bootstage.c b/common/bootstage.c index 326c40f1561..389131647a9 100644 --- a/common/bootstage.c +++ b/common/bootstage.c @@ -25,7 +25,7 @@ DECLARE_GLOBAL_DATA_PTR;
enum { - RECORD_COUNT = CONFIG_VAL(BOOTSTAGE_RECORD_COUNT), + RECORD_COUNT = CONFIG_BOOTSTAGE_RECORD_COUNT, };
struct bootstage_record { diff --git a/common/console.c b/common/console.c index 1995b8a996e..8c96bcb0438 100644 --- a/common/console.c +++ b/common/console.c @@ -624,7 +624,7 @@ int tstc(void) #define PRE_CONSOLE_FLUSHPOINT2_EVERYTHING_BUT_SERIAL 1
#if IS_ENABLED(CONFIG_PRE_CONSOLE_BUFFER) -#define CIRC_BUF_IDX(idx) ((idx) % (unsigned long)CONFIG_VAL(PRE_CON_BUF_SZ)) +#define CIRC_BUF_IDX(idx) ((idx) % (unsigned long)CONFIG_PRE_CON_BUF_SZ)
static void pre_console_putc(const char c) { @@ -633,7 +633,7 @@ static void pre_console_putc(const char c) if (gd->precon_buf_idx < 0) return;
- buffer = map_sysmem(CONFIG_VAL(PRE_CON_BUF_ADDR), CONFIG_VAL(PRE_CON_BUF_SZ)); + buffer = map_sysmem(CONFIG_PRE_CON_BUF_ADDR, CONFIG_PRE_CON_BUF_SZ);
buffer[CIRC_BUF_IDX(gd->precon_buf_idx++)] = c;
@@ -652,15 +652,15 @@ static void pre_console_puts(const char *s) static void print_pre_console_buffer(int flushpoint) { long in = 0, out = 0; - char buf_out[CONFIG_VAL(PRE_CON_BUF_SZ) + 1]; + char buf_out[CONFIG_PRE_CON_BUF_SZ + 1]; char *buf_in;
if (IS_ENABLED(CONFIG_SILENT_CONSOLE) && (gd->flags & GD_FLG_SILENT)) return;
- buf_in = map_sysmem(CONFIG_VAL(PRE_CON_BUF_ADDR), CONFIG_VAL(PRE_CON_BUF_SZ)); - if (gd->precon_buf_idx > CONFIG_VAL(PRE_CON_BUF_SZ)) - in = gd->precon_buf_idx - CONFIG_VAL(PRE_CON_BUF_SZ); + buf_in = map_sysmem(CONFIG_PRE_CON_BUF_ADDR, CONFIG_PRE_CON_BUF_SZ); + if (gd->precon_buf_idx > CONFIG_PRE_CON_BUF_SZ) + in = gd->precon_buf_idx - CONFIG_PRE_CON_BUF_SZ;
while (in < gd->precon_buf_idx) buf_out[out++] = buf_in[CIRC_BUF_IDX(in++)]; diff --git a/common/dlmalloc.c b/common/dlmalloc.c index c0f22d7f02a..f675baaa003 100644 --- a/common/dlmalloc.c +++ b/common/dlmalloc.c @@ -1305,7 +1305,7 @@ Void_t* mALLOc(bytes) size_t bytes;
INTERNAL_SIZE_T nb;
-#if CONFIG_VAL(SYS_MALLOC_F_LEN) +#if CONFIG_SYS_MALLOC_F_LEN if (!(gd->flags & GD_FLG_FULL_MALLOC_INIT)) return malloc_simple(bytes); #endif @@ -1586,7 +1586,7 @@ void fREe(mem) Void_t* mem; mchunkptr fwd; /* misc temp for linking */ int islr; /* track whether merging with last_remainder */
-#if CONFIG_VAL(SYS_MALLOC_F_LEN) +#if CONFIG_SYS_MALLOC_F_LEN /* free() is a no-op - all the memory will be freed on relocation */ if (!(gd->flags & GD_FLG_FULL_MALLOC_INIT)) { VALGRIND_FREELIKE_BLOCK(mem, SIZE_SZ); @@ -1749,7 +1749,7 @@ Void_t* rEALLOc(oldmem, bytes) Void_t* oldmem; size_t bytes; /* realloc of null is supposed to be same as malloc */ if (oldmem == NULL) return mALLOc(bytes);
-#if CONFIG_VAL(SYS_MALLOC_F_LEN) +#if CONFIG_SYS_MALLOC_F_LEN if (!(gd->flags & GD_FLG_FULL_MALLOC_INIT)) { /* This is harder to support and should not be needed */ panic("pre-reloc realloc() is not supported"); @@ -1971,7 +1971,7 @@ Void_t* mEMALIGn(alignment, bytes) size_t alignment; size_t bytes;
if ((long)bytes < 0) return NULL;
-#if CONFIG_VAL(SYS_MALLOC_F_LEN) +#if CONFIG_SYS_MALLOC_F_LEN if (!(gd->flags & GD_FLG_FULL_MALLOC_INIT)) { return memalign_simple(alignment, bytes); } @@ -2167,7 +2167,7 @@ Void_t* cALLOc(n, elem_size) size_t n; size_t elem_size; return NULL; else { -#if CONFIG_VAL(SYS_MALLOC_F_LEN) +#if CONFIG_SYS_MALLOC_F_LEN if (!(gd->flags & GD_FLG_FULL_MALLOC_INIT)) { memset(mem, 0, sz); return mem; @@ -2469,9 +2469,9 @@ int mALLOPt(param_number, value) int param_number; int value;
int initf_malloc(void) { -#if CONFIG_VAL(SYS_MALLOC_F_LEN) +#if CONFIG_SYS_MALLOC_F_LEN assert(gd->malloc_base); /* Set up by crt0.S */ - gd->malloc_limit = CONFIG_VAL(SYS_MALLOC_F_LEN); + gd->malloc_limit = CONFIG_SYS_MALLOC_F_LEN; gd->malloc_ptr = 0; #endif
diff --git a/common/init/board_init.c b/common/init/board_init.c index e8bbb6be74c..20a7e2f649a 100644 --- a/common/init/board_init.c +++ b/common/init/board_init.c @@ -43,11 +43,11 @@ __weak void board_init_f_init_stack_protection(void) { #if IS_ENABLED(CONFIG_SYS_REPORT_STACK_F_USAGE) ulong stack_bottom = gd->start_addr_sp - - CONFIG_VAL(SIZE_LIMIT_PROVIDE_STACK); + CONFIG_SIZE_LIMIT_PROVIDE_STACK;
/* substact some safety margin (0x20) since stack is in use here */ - memset((void *)stack_bottom, CONFIG_VAL(SYS_STACK_F_CHECK_BYTE), - CONFIG_VAL(SIZE_LIMIT_PROVIDE_STACK) - 0x20); + memset((void *)stack_bottom, CONFIG_SYS_STACK_F_CHECK_BYTE, + CONFIG_SIZE_LIMIT_PROVIDE_STACK - 0x20); #endif }
@@ -79,8 +79,8 @@ ulong board_init_f_alloc_reserve(ulong top) { /* Reserve early malloc arena */ #ifndef CFG_MALLOC_F_ADDR -#if CONFIG_VAL(SYS_MALLOC_F_LEN) - top -= CONFIG_VAL(SYS_MALLOC_F_LEN); +#if CONFIG_SYS_MALLOC_F_LEN + top -= CONFIG_SYS_MALLOC_F_LEN; #endif #endif /* LAST : reserve GD (rounded up to a multiple of 16 bytes) */ @@ -159,7 +159,7 @@ void board_init_f_init_reserve(ulong base) * Use gd as it is now properly set for all architectures. */
-#if CONFIG_VAL(SYS_MALLOC_F_LEN) +#if CONFIG_SYS_MALLOC_F_LEN /* go down one 'early malloc arena' */ gd->malloc_base = base; #endif diff --git a/common/malloc_simple.c b/common/malloc_simple.c index f77fdd62f39..bbcf31c609e 100644 --- a/common/malloc_simple.c +++ b/common/malloc_simple.c @@ -89,5 +89,5 @@ void free_simple(void *ptr) void malloc_simple_info(void) { log_info("malloc_simple: %lx bytes used, %lx remain\n", gd->malloc_ptr, - CONFIG_VAL(SYS_MALLOC_F_LEN) - gd->malloc_ptr); + CONFIG_SYS_MALLOC_F_LEN - gd->malloc_ptr); } diff --git a/common/spl/spl.c b/common/spl/spl.c index f2c6ebef023..47703fe8dac 100644 --- a/common/spl/spl.c +++ b/common/spl/spl.c @@ -525,12 +525,12 @@ static int spl_common_init(bool setup_malloc) { int ret;
-#if CONFIG_VAL(SYS_MALLOC_F_LEN) +#if CONFIG_SYS_MALLOC_F_LEN if (setup_malloc) { #ifdef CFG_MALLOC_F_ADDR gd->malloc_base = CFG_MALLOC_F_ADDR; #endif - gd->malloc_limit = CONFIG_VAL(SYS_MALLOC_F_LEN); + gd->malloc_limit = CONFIG_SYS_MALLOC_F_LEN; gd->malloc_ptr = 0; } #endif @@ -877,7 +877,7 @@ void board_init_r(gd_t *dummy1, ulong dummy2) default: debug("Unsupported OS image.. Jumping nevertheless..\n"); } -#if CONFIG_VAL(SYS_MALLOC_F_LEN) && !defined(CONFIG_SYS_SPL_MALLOC_SIZE) +#if CONFIG_SYS_MALLOC_F_LEN && !defined(CONFIG_SYS_SPL_MALLOC_SIZE) debug("SPL malloc() used 0x%lx bytes (%ld KB)\n", gd->malloc_ptr, gd->malloc_ptr / 1024); #endif @@ -924,17 +924,17 @@ __weak void spl_relocate_stack_check(void) { #if IS_ENABLED(CONFIG_SYS_REPORT_STACK_F_USAGE) ulong init_sp = gd->start_addr_sp; - ulong stack_bottom = init_sp - CONFIG_VAL(SIZE_LIMIT_PROVIDE_STACK); + ulong stack_bottom = init_sp - CONFIG_SIZE_LIMIT_PROVIDE_STACK; u8 *ptr = (u8 *)stack_bottom; ulong i;
- for (i = 0; i < CONFIG_VAL(SIZE_LIMIT_PROVIDE_STACK); i++) { - if (*ptr != CONFIG_VAL(SYS_STACK_F_CHECK_BYTE)) + for (i = 0; i < CONFIG_SIZE_LIMIT_PROVIDE_STACK; i++) { + if (*ptr != CONFIG_SYS_STACK_F_CHECK_BYTE) break; ptr++; } printf("SPL initial stack usage: %lu bytes\n", - CONFIG_VAL(SIZE_LIMIT_PROVIDE_STACK) - i); + CONFIG_SIZE_LIMIT_PROVIDE_STACK - i); #endif }
@@ -965,7 +965,7 @@ ulong spl_relocate_stack_gd(void) if (IS_ENABLED(CONFIG_SYS_REPORT_STACK_F_USAGE)) spl_relocate_stack_check();
-#if defined(CONFIG_SPL_SYS_MALLOC_SIMPLE) && CONFIG_VAL(SYS_MALLOC_F_LEN) +#if defined(CONFIG_SPL_SYS_MALLOC_SIMPLE) && CONFIG_SYS_MALLOC_F_LEN if (CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN) { debug("SPL malloc() before relocation used 0x%lx bytes (%ld KB)\n", gd->malloc_ptr, gd->malloc_ptr / 1024); diff --git a/common/spl/spl_mmc.c b/common/spl/spl_mmc.c index f1a80fbeb81..89eee8702ac 100644 --- a/common/spl/spl_mmc.c +++ b/common/spl/spl_mmc.c @@ -229,7 +229,7 @@ static int mmc_load_image_raw_os(struct spl_image_info *spl_image, { int ret;
-#if CONFIG_VAL(SYS_MMCSD_RAW_MODE_ARGS_SECTOR) +#if CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR unsigned long count;
count = blk_dread(mmc_get_blk_desc(mmc), diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c index 55a566402ce..a749a85add0 100644 --- a/drivers/mmc/mmc.c +++ b/drivers/mmc/mmc.c @@ -135,7 +135,7 @@ void mmc_trace_state(struct mmc *mmc, struct mmc_cmd *cmd) } #endif
-#if IS_ENABLED(CONFIG_MMC_VERBOSE) || defined(DEBUG) || CONFIG_VAL(LOGLEVEL) >= LOGL_DEBUG +#if IS_ENABLED(CONFIG_MMC_VERBOSE) || defined(DEBUG) || CONFIG_LOGLEVEL >= LOGL_DEBUG const char *mmc_mode_name(enum bus_mode mode) { static const char *const names[] = { diff --git a/drivers/serial/altera_jtag_uart.c b/drivers/serial/altera_jtag_uart.c index 9e39da7dd24..4435fcf56b9 100644 --- a/drivers/serial/altera_jtag_uart.c +++ b/drivers/serial/altera_jtag_uart.c @@ -134,7 +134,7 @@ static inline void _debug_uart_init(void)
static inline void _debug_uart_putc(int ch) { - struct altera_jtaguart_regs *regs = (void *)CONFIG_VAL(DEBUG_UART_BASE); + struct altera_jtaguart_regs *regs = (void *)CONFIG_DEBUG_UART_BASE;
while (1) { u32 st = readl(®s->control); diff --git a/drivers/serial/altera_uart.c b/drivers/serial/altera_uart.c index 35920480841..b18be6e2454 100644 --- a/drivers/serial/altera_uart.c +++ b/drivers/serial/altera_uart.c @@ -123,7 +123,7 @@ U_BOOT_DRIVER(altera_uart) = {
static inline void _debug_uart_init(void) { - struct altera_uart_regs *regs = (void *)CONFIG_VAL(DEBUG_UART_BASE); + struct altera_uart_regs *regs = (void *)CONFIG_DEBUG_UART_BASE; u32 div;
div = (CONFIG_DEBUG_UART_CLOCK / CONFIG_BAUDRATE) - 1; @@ -132,7 +132,7 @@ static inline void _debug_uart_init(void)
static inline void _debug_uart_putc(int ch) { - struct altera_uart_regs *regs = (void *)CONFIG_VAL(DEBUG_UART_BASE); + struct altera_uart_regs *regs = (void *)CONFIG_DEBUG_UART_BASE;
while (1) { u32 st = readl(®s->status); diff --git a/drivers/serial/atmel_usart.c b/drivers/serial/atmel_usart.c index 6327a590a69..7d34b293cf3 100644 --- a/drivers/serial/atmel_usart.c +++ b/drivers/serial/atmel_usart.c @@ -317,14 +317,14 @@ U_BOOT_DRIVER(serial_atmel) = { #ifdef CONFIG_DEBUG_UART_ATMEL static inline void _debug_uart_init(void) { - atmel_usart3_t *usart = (atmel_usart3_t *)CONFIG_VAL(DEBUG_UART_BASE); + atmel_usart3_t *usart = (atmel_usart3_t *)CONFIG_DEBUG_UART_BASE;
_atmel_serial_init(usart, CONFIG_DEBUG_UART_CLOCK, CONFIG_BAUDRATE); }
static inline void _debug_uart_putc(int ch) { - atmel_usart3_t *usart = (atmel_usart3_t *)CONFIG_VAL(DEBUG_UART_BASE); + atmel_usart3_t *usart = (atmel_usart3_t *)CONFIG_DEBUG_UART_BASE;
while (!(readl(&usart->csr) & USART3_BIT(TXRDY))) ; diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c index ab96cebd4ea..4d39b4cbfa1 100644 --- a/drivers/serial/ns16550.c +++ b/drivers/serial/ns16550.c @@ -325,7 +325,7 @@ int ns16550_tstc(struct ns16550 *com_port)
static inline void _debug_uart_init(void) { - struct ns16550 *com_port = (struct ns16550 *)CONFIG_VAL(DEBUG_UART_BASE); + struct ns16550 *com_port = (struct ns16550 *)CONFIG_DEBUG_UART_BASE; int baud_divisor;
/* Wait until tx buffer is empty */ @@ -364,7 +364,7 @@ static inline int NS16550_read_baud_divisor(struct ns16550 *com_port)
static inline void _debug_uart_putc(int ch) { - struct ns16550 *com_port = (struct ns16550 *)CONFIG_VAL(DEBUG_UART_BASE); + struct ns16550 *com_port = (struct ns16550 *)CONFIG_DEBUG_UART_BASE;
while (!(serial_din(&com_port->lsr) & UART_LSR_THRE)) { #ifdef CONFIG_DEBUG_UART_NS16550_CHECK_ENABLED diff --git a/drivers/serial/serial_ar933x.c b/drivers/serial/serial_ar933x.c index 4f916349762..da06bef97c7 100644 --- a/drivers/serial/serial_ar933x.c +++ b/drivers/serial/serial_ar933x.c @@ -199,7 +199,7 @@ U_BOOT_DRIVER(serial_ar933x) = {
static inline void _debug_uart_init(void) { - void __iomem *regs = (void *)CONFIG_VAL(DEBUG_UART_BASE); + void __iomem *regs = (void *)CONFIG_DEBUG_UART_BASE; u32 val, scale, step;
/* @@ -227,7 +227,7 @@ static inline void _debug_uart_init(void)
static inline void _debug_uart_putc(int c) { - void __iomem *regs = (void *)CONFIG_VAL(DEBUG_UART_BASE); + void __iomem *regs = (void *)CONFIG_DEBUG_UART_BASE; u32 data;
do { diff --git a/drivers/serial/serial_arc.c b/drivers/serial/serial_arc.c index c2fc8a901e2..707177d00ec 100644 --- a/drivers/serial/serial_arc.c +++ b/drivers/serial/serial_arc.c @@ -137,7 +137,7 @@ U_BOOT_DRIVER(serial_arc) = {
static inline void _debug_uart_init(void) { - struct arc_serial_regs *regs = (struct arc_serial_regs *)CONFIG_VAL(DEBUG_UART_BASE); + struct arc_serial_regs *regs = (struct arc_serial_regs *)CONFIG_DEBUG_UART_BASE; int arc_console_baud = CONFIG_DEBUG_UART_CLOCK / (CONFIG_BAUDRATE * 4) - 1;
writeb(arc_console_baud & 0xff, ®s->baudl); @@ -146,7 +146,7 @@ static inline void _debug_uart_init(void)
static inline void _debug_uart_putc(int c) { - struct arc_serial_regs *regs = (struct arc_serial_regs *)CONFIG_VAL(DEBUG_UART_BASE); + struct arc_serial_regs *regs = (struct arc_serial_regs *)CONFIG_DEBUG_UART_BASE;
while (!(readb(®s->status) & UART_TXEMPTY)) ; diff --git a/drivers/serial/serial_bcm6345.c b/drivers/serial/serial_bcm6345.c index 2359656a239..f08e91ff3ba 100644 --- a/drivers/serial/serial_bcm6345.c +++ b/drivers/serial/serial_bcm6345.c @@ -269,7 +269,7 @@ U_BOOT_DRIVER(bcm6345_serial) = { #ifdef CONFIG_DEBUG_UART_BCM6345 static inline void _debug_uart_init(void) { - void __iomem *base = (void __iomem *)CONFIG_VAL(DEBUG_UART_BASE); + void __iomem *base = (void __iomem *)CONFIG_DEBUG_UART_BASE;
bcm6345_serial_init(base, CONFIG_DEBUG_UART_CLOCK, CONFIG_BAUDRATE); } @@ -285,7 +285,7 @@ static inline void wait_xfered(void __iomem *base)
static inline void _debug_uart_putc(int ch) { - void __iomem *base = (void __iomem *)CONFIG_VAL(DEBUG_UART_BASE); + void __iomem *base = (void __iomem *)CONFIG_DEBUG_UART_BASE;
wait_xfered(base); writel(ch, base + UART_FIFO_REG); diff --git a/drivers/serial/serial_linflexuart.c b/drivers/serial/serial_linflexuart.c index b449e55a650..876a4baa9fc 100644 --- a/drivers/serial/serial_linflexuart.c +++ b/drivers/serial/serial_linflexuart.c @@ -201,14 +201,14 @@ U_BOOT_DRIVER(serial_linflex) = {
static inline void _debug_uart_init(void) { - struct linflex_fsl *base = (struct linflex_fsl *)CONFIG_VAL(DEBUG_UART_BASE); + struct linflex_fsl *base = (struct linflex_fsl *)CONFIG_DEBUG_UART_BASE;
linflex_serial_init_internal(base); }
static inline void _debug_uart_putc(int ch) { - struct linflex_fsl *base = (struct linflex_fsl *)CONFIG_VAL(DEBUG_UART_BASE); + struct linflex_fsl *base = (struct linflex_fsl *)CONFIG_DEBUG_UART_BASE;
/* XXX: Is this OK? Should this use the non-DM version? */ _linflex_serial_putc(base, ch); diff --git a/drivers/serial/serial_meson.c b/drivers/serial/serial_meson.c index d026f5a7a8e..90c370cf611 100644 --- a/drivers/serial/serial_meson.c +++ b/drivers/serial/serial_meson.c @@ -252,7 +252,7 @@ static inline void _debug_uart_init(void)
static inline void _debug_uart_putc(int ch) { - struct meson_uart *regs = (struct meson_uart *)CONFIG_VAL(DEBUG_UART_BASE); + struct meson_uart *regs = (struct meson_uart *)CONFIG_DEBUG_UART_BASE;
while (readl(®s->status) & AML_UART_TX_FULL) ; diff --git a/drivers/serial/serial_msm_geni.c b/drivers/serial/serial_msm_geni.c index 3943ca43e49..3e255a99dcc 100644 --- a/drivers/serial/serial_msm_geni.c +++ b/drivers/serial/serial_msm_geni.c @@ -569,7 +569,7 @@ U_BOOT_DRIVER(serial_msm_geni) = { #ifdef CONFIG_DEBUG_UART_MSM_GENI
static struct msm_serial_data init_serial_data = { - .base = CONFIG_VAL(DEBUG_UART_BASE) + .base = CONFIG_DEBUG_UART_BASE };
/* Serial dumb device, to reuse driver code */ @@ -587,7 +587,7 @@ static struct udevice init_dev = {
static inline void _debug_uart_init(void) { - phys_addr_t base = CONFIG_VAL(DEBUG_UART_BASE); + phys_addr_t base = CONFIG_DEBUG_UART_BASE;
geni_serial_init(&init_dev); geni_serial_baud(base, CLK_DIV, CONFIG_BAUDRATE); @@ -596,7 +596,7 @@ static inline void _debug_uart_init(void)
static inline void _debug_uart_putc(int ch) { - phys_addr_t base = CONFIG_VAL(DEBUG_UART_BASE); + phys_addr_t base = CONFIG_DEBUG_UART_BASE;
writel(DEF_TX_WM, base + SE_GENI_TX_WATERMARK_REG); qcom_geni_serial_setup_tx(base, 1); diff --git a/drivers/serial/serial_mt7620.c b/drivers/serial/serial_mt7620.c index 903ba2dd6ac..a89264b4ddf 100644 --- a/drivers/serial/serial_mt7620.c +++ b/drivers/serial/serial_mt7620.c @@ -220,7 +220,7 @@ static inline void _debug_uart_init(void) { struct mt7620_serial_plat plat;
- plat.regs = (void *)CONFIG_VAL(DEBUG_UART_BASE); + plat.regs = (void *)CONFIG_DEBUG_UART_BASE; plat.clock = CONFIG_DEBUG_UART_CLOCK;
writel(0, &plat.regs->ier); @@ -233,7 +233,7 @@ static inline void _debug_uart_init(void) static inline void _debug_uart_putc(int ch) { struct mt7620_serial_regs __iomem *regs = - (void *)CONFIG_VAL(DEBUG_UART_BASE); + (void *)CONFIG_DEBUG_UART_BASE;
while (!(readl(®s->lsr) & UART_LSR_THRE)) ; diff --git a/drivers/serial/serial_mtk.c b/drivers/serial/serial_mtk.c index a9d1b8280ef..c9c5c38f451 100644 --- a/drivers/serial/serial_mtk.c +++ b/drivers/serial/serial_mtk.c @@ -439,7 +439,7 @@ static inline void _debug_uart_init(void) { struct mtk_serial_priv priv;
- priv.regs = (void *) CONFIG_VAL(DEBUG_UART_BASE); + priv.regs = (void *)CONFIG_DEBUG_UART_BASE; priv.fixed_clk_rate = CONFIG_DEBUG_UART_CLOCK;
writel(0, &priv.regs->ier); @@ -451,8 +451,7 @@ static inline void _debug_uart_init(void)
static inline void _debug_uart_putc(int ch) { - struct mtk_serial_regs __iomem *regs = - (void *) CONFIG_VAL(DEBUG_UART_BASE); + struct mtk_serial_regs __iomem *regs = (void *)CONFIG_DEBUG_UART_BASE;
while (!(readl(®s->lsr) & UART_LSR_THRE)) ; diff --git a/drivers/serial/serial_mvebu_a3700.c b/drivers/serial/serial_mvebu_a3700.c index b2017c64556..d8035b28ea7 100644 --- a/drivers/serial/serial_mvebu_a3700.c +++ b/drivers/serial/serial_mvebu_a3700.c @@ -321,7 +321,7 @@ U_BOOT_DRIVER(serial_mvebu) = {
static inline void _debug_uart_init(void) { - void __iomem *base = (void __iomem *)CONFIG_VAL(DEBUG_UART_BASE); + void __iomem *base = (void __iomem *)CONFIG_DEBUG_UART_BASE; u32 parent_rate, divider;
/* reset FIFOs */ @@ -349,7 +349,7 @@ static inline void _debug_uart_init(void)
static inline void _debug_uart_putc(int ch) { - void __iomem *base = (void __iomem *)CONFIG_VAL(DEBUG_UART_BASE); + void __iomem *base = (void __iomem *)CONFIG_DEBUG_UART_BASE;
while (readl(base + UART_STATUS_REG) & UART_STATUS_TXFIFO_FULL) ; diff --git a/drivers/serial/serial_mxc.c b/drivers/serial/serial_mxc.c index 7825c89f3b6..5e585a01599 100644 --- a/drivers/serial/serial_mxc.c +++ b/drivers/serial/serial_mxc.c @@ -385,7 +385,7 @@ U_BOOT_DRIVER(serial_mxc) = {
static inline void _debug_uart_init(void) { - struct mxc_uart *base = (struct mxc_uart *)CONFIG_VAL(DEBUG_UART_BASE); + struct mxc_uart *base = (struct mxc_uart *)CONFIG_DEBUG_UART_BASE;
_mxc_serial_init(base, false); _mxc_serial_setbrg(base, CONFIG_DEBUG_UART_CLOCK, @@ -394,7 +394,7 @@ static inline void _debug_uart_init(void)
static inline void _debug_uart_putc(int ch) { - struct mxc_uart *base = (struct mxc_uart *)CONFIG_VAL(DEBUG_UART_BASE); + struct mxc_uart *base = (struct mxc_uart *)CONFIG_DEBUG_UART_BASE;
while (!(readl(&base->ts) & UTS_TXEMPTY)) schedule(); diff --git a/drivers/serial/serial_omap.c b/drivers/serial/serial_omap.c index 3eae2db313e..a53cce012a7 100644 --- a/drivers/serial/serial_omap.c +++ b/drivers/serial/serial_omap.c @@ -66,7 +66,7 @@ static inline int serial_in_shift(void *addr, int shift)
static inline void _debug_uart_init(void) { - struct ns16550 *com_port = (struct ns16550 *)CONFIG_VAL(DEBUG_UART_BASE); + struct ns16550 *com_port = (struct ns16550 *)CONFIG_DEBUG_UART_BASE; int baud_divisor;
baud_divisor = ns16550_calc_divisor(com_port, CONFIG_DEBUG_UART_CLOCK, @@ -85,7 +85,7 @@ static inline void _debug_uart_init(void)
static inline void _debug_uart_putc(int ch) { - struct ns16550 *com_port = (struct ns16550 *)CONFIG_VAL(DEBUG_UART_BASE); + struct ns16550 *com_port = (struct ns16550 *)CONFIG_DEBUG_UART_BASE;
while (!(serial_din(&com_port->lsr) & UART_LSR_THRE)) ; diff --git a/drivers/serial/serial_pic32.c b/drivers/serial/serial_pic32.c index 3c5d37ce0ab..ccdda9f0334 100644 --- a/drivers/serial/serial_pic32.c +++ b/drivers/serial/serial_pic32.c @@ -187,14 +187,14 @@ U_BOOT_DRIVER(pic32_serial) = {
static inline void _debug_uart_init(void) { - void __iomem *base = (void __iomem *)CONFIG_VAL(DEBUG_UART_BASE); + void __iomem *base = (void __iomem *)CONFIG_DEBUG_UART_BASE;
pic32_serial_init(base, CONFIG_DEBUG_UART_CLOCK, CONFIG_BAUDRATE); }
static inline void _debug_uart_putc(int ch) { - writel(ch, CONFIG_VAL(DEBUG_UART_BASE) + U_TXR); + writel(ch, CONFIG_DEBUG_UART_BASE + U_TXR); }
DEBUG_UART_FUNCS diff --git a/drivers/serial/serial_pl01x.c b/drivers/serial/serial_pl01x.c index b3a988cb241..29f362b39e6 100644 --- a/drivers/serial/serial_pl01x.c +++ b/drivers/serial/serial_pl01x.c @@ -398,7 +398,7 @@ U_BOOT_DRIVER(serial_pl01x) = { static void _debug_uart_init(void) { #ifndef CONFIG_DEBUG_UART_SKIP_INIT - struct pl01x_regs *regs = (struct pl01x_regs *)CONFIG_VAL(DEBUG_UART_BASE); + struct pl01x_regs *regs = (struct pl01x_regs *)CONFIG_DEBUG_UART_BASE; enum pl01x_type type;
if (IS_ENABLED(CONFIG_DEBUG_UART_PL011)) @@ -414,7 +414,7 @@ static void _debug_uart_init(void)
static inline void _debug_uart_putc(int ch) { - struct pl01x_regs *regs = (struct pl01x_regs *)CONFIG_VAL(DEBUG_UART_BASE); + struct pl01x_regs *regs = (struct pl01x_regs *)CONFIG_DEBUG_UART_BASE;
while (pl01x_putc(regs, ch) == -EAGAIN) ; diff --git a/drivers/serial/serial_s5p.c b/drivers/serial/serial_s5p.c index 7aeb8c0f8cb..2b465115bda 100644 --- a/drivers/serial/serial_s5p.c +++ b/drivers/serial/serial_s5p.c @@ -276,7 +276,7 @@ static inline void _debug_uart_init(void) if (IS_ENABLED(CONFIG_DEBUG_UART_SKIP_INIT)) return;
- struct s5p_uart *uart = (struct s5p_uart *)CONFIG_VAL(DEBUG_UART_BASE); + struct s5p_uart *uart = (struct s5p_uart *)CONFIG_DEBUG_UART_BASE;
s5p_serial_init(uart); #if IS_ENABLED(CONFIG_ARCH_APPLE) @@ -288,7 +288,7 @@ static inline void _debug_uart_init(void)
static inline void _debug_uart_putc(int ch) { - struct s5p_uart *uart = (struct s5p_uart *)CONFIG_VAL(DEBUG_UART_BASE); + struct s5p_uart *uart = (struct s5p_uart *)CONFIG_DEBUG_UART_BASE;
#if IS_ENABLED(CONFIG_ARCH_APPLE) while (readl(&uart->ufstat) & S5L_TX_FIFO_FULL); diff --git a/drivers/serial/serial_sifive.c b/drivers/serial/serial_sifive.c index c449f3fd02d..a48b0b5b340 100644 --- a/drivers/serial/serial_sifive.c +++ b/drivers/serial/serial_sifive.c @@ -212,7 +212,7 @@ U_BOOT_DRIVER(serial_sifive) = { static inline void _debug_uart_init(void) { struct uart_sifive *regs = - (struct uart_sifive *)CONFIG_VAL(DEBUG_UART_BASE); + (struct uart_sifive *)CONFIG_DEBUG_UART_BASE;
_sifive_serial_setbrg(regs, CONFIG_DEBUG_UART_CLOCK, CONFIG_BAUDRATE); @@ -222,7 +222,7 @@ static inline void _debug_uart_init(void) static inline void _debug_uart_putc(int ch) { struct uart_sifive *regs = - (struct uart_sifive *)CONFIG_VAL(DEBUG_UART_BASE); + (struct uart_sifive *)CONFIG_DEBUG_UART_BASE;
while (_sifive_serial_putc(regs, ch) == -EAGAIN) schedule(); diff --git a/drivers/serial/serial_stm32.c b/drivers/serial/serial_stm32.c index 37ceca426d2..ad5cac0cdec 100644 --- a/drivers/serial/serial_stm32.c +++ b/drivers/serial/serial_stm32.c @@ -270,7 +270,7 @@ static inline struct stm32_uart_info *_debug_uart_info(void)
static inline void _debug_uart_init(void) { - fdt_addr_t base = CONFIG_VAL(DEBUG_UART_BASE); + fdt_addr_t base = CONFIG_DEBUG_UART_BASE; struct stm32_uart_info *uart_info = _debug_uart_info();
_stm32_serial_init(base, uart_info); @@ -281,7 +281,7 @@ static inline void _debug_uart_init(void)
static inline void _debug_uart_putc(int c) { - fdt_addr_t base = CONFIG_VAL(DEBUG_UART_BASE); + fdt_addr_t base = CONFIG_DEBUG_UART_BASE; struct stm32_uart_info *uart_info = _debug_uart_info();
while (_stm32_serial_putc(base, uart_info, c) == -EAGAIN) diff --git a/drivers/serial/serial_xuartlite.c b/drivers/serial/serial_xuartlite.c index b6197da97cc..9780a44d09e 100644 --- a/drivers/serial/serial_xuartlite.c +++ b/drivers/serial/serial_xuartlite.c @@ -143,7 +143,7 @@ U_BOOT_DRIVER(serial_uartlite) = {
static inline void _debug_uart_init(void) { - struct uartlite *regs = (struct uartlite *)CONFIG_VAL(DEBUG_UART_BASE); + struct uartlite *regs = (struct uartlite *)CONFIG_DEBUG_UART_BASE; int ret;
uart_out32(®s->control, 0); @@ -159,7 +159,7 @@ static inline void _debug_uart_init(void)
static inline void _debug_uart_putc(int ch) { - struct uartlite *regs = (struct uartlite *)CONFIG_VAL(DEBUG_UART_BASE); + struct uartlite *regs = (struct uartlite *)CONFIG_DEBUG_UART_BASE;
while (uart_in32(®s->status) & SR_TX_FIFO_FULL) ; diff --git a/drivers/serial/serial_zynq.c b/drivers/serial/serial_zynq.c index 9bb9b7d3b8d..ae74b09fbc9 100644 --- a/drivers/serial/serial_zynq.c +++ b/drivers/serial/serial_zynq.c @@ -295,7 +295,7 @@ U_BOOT_DRIVER(serial_zynq) = { #ifdef CONFIG_DEBUG_UART_ZYNQ static inline void _debug_uart_init(void) { - struct uart_zynq *regs = (struct uart_zynq *)CONFIG_VAL(DEBUG_UART_BASE); + struct uart_zynq *regs = (struct uart_zynq *)CONFIG_DEBUG_UART_BASE;
_uart_zynq_serial_init(regs); _uart_zynq_serial_setbrg(regs, CONFIG_DEBUG_UART_CLOCK, @@ -304,7 +304,7 @@ static inline void _debug_uart_init(void)
static inline void _debug_uart_putc(int ch) { - struct uart_zynq *regs = (struct uart_zynq *)CONFIG_VAL(DEBUG_UART_BASE); + struct uart_zynq *regs = (struct uart_zynq *)CONFIG_DEBUG_UART_BASE;
while (_uart_zynq_serial_putc(regs, ch) == -EAGAIN) schedule(); diff --git a/include/asm-generic/global_data.h b/include/asm-generic/global_data.h index 0e2559a8a85..c51388cfb6a 100644 --- a/include/asm-generic/global_data.h +++ b/include/asm-generic/global_data.h @@ -301,7 +301,7 @@ struct global_data { * @timebase_l: low 32 bits of timer */ unsigned int timebase_l; -#if CONFIG_VAL(SYS_MALLOC_F_LEN) +#if CONFIG_SYS_MALLOC_F_LEN /** * @malloc_base: base address of early malloc() */ diff --git a/include/dm/device_compat.h b/include/dm/device_compat.h index 47329089d50..2dc106b99dd 100644 --- a/include/dm/device_compat.h +++ b/include/dm/device_compat.h @@ -50,7 +50,7 @@ printf(fmt, ##__VA_ARGS__); \ else if (IS_ENABLED(CONFIG_LOG)) \ log(cat, level, fmt, ##__VA_ARGS__); \ - else if (level < CONFIG_VAL(LOGLEVEL)) \ + else if (level < CONFIG_LOGLEVEL) \ printf(fmt, ##__VA_ARGS__); \ })
diff --git a/include/linux/kconfig.h b/include/linux/kconfig.h index 381f4eb5a1c..591b38040cd 100644 --- a/include/linux/kconfig.h +++ b/include/linux/kconfig.h @@ -32,10 +32,6 @@ #define __config_enabled(arg1_or_junk, def_val) ___config_enabled(arg1_or_junk 1, def_val) #define ___config_enabled(__ignored, val, ...) val
-#define __config_val(cfg) CONFIG_ ## cfg - -#define CONFIG_VAL(option) __config_val(option) - /* * Count number of arguments to a variadic macro. Currently only need * it for 1, 2 or 3 arguments. diff --git a/include/log.h b/include/log.h index e97b62db015..240617dbbdd 100644 --- a/include/log.h +++ b/include/log.h @@ -163,7 +163,7 @@ int _log_buffer(enum log_category_t cat, enum log_level_t level, * CONFIG_LOG_MAX_LEVEL is not defined. Add a check for this. */ #if IS_ENABLED(CONFIG_LOG) -#define _LOG_MAX_LEVEL CONFIG_VAL(LOG_MAX_LEVEL) +#define _LOG_MAX_LEVEL CONFIG_LOG_MAX_LEVEL #else #define _LOG_MAX_LEVEL LOGL_INFO #endif diff --git a/lib/asm-offsets.c b/lib/asm-offsets.c index 0808cd4b0c1..a5c18888d8a 100644 --- a/lib/asm-offsets.c +++ b/lib/asm-offsets.c @@ -32,7 +32,7 @@ int main(void)
DEFINE(GD_FLAGS, offsetof(struct global_data, flags));
-#if CONFIG_VAL(SYS_MALLOC_F_LEN) +#if CONFIG_SYS_MALLOC_F_LEN DEFINE(GD_MALLOC_BASE, offsetof(struct global_data, malloc_base)); #endif
diff --git a/lib/efi/efi_app.c b/lib/efi/efi_app.c index 2209410f35b..918b7a48407 100644 --- a/lib/efi/efi_app.c +++ b/lib/efi/efi_app.c @@ -125,7 +125,7 @@ static efi_status_t setup_memory(struct efi_priv *priv) return ret; memset(gd, '\0', sizeof(*gd));
- gd->malloc_base = (ulong)efi_malloc(priv, CONFIG_VAL(SYS_MALLOC_F_LEN), + gd->malloc_base = (ulong)efi_malloc(priv, CONFIG_SYS_MALLOC_F_LEN, &ret); if (!gd->malloc_base) return ret; diff --git a/lib/fdtdec.c b/lib/fdtdec.c index b044bd33826..e8eb38260ec 100644 --- a/lib/fdtdec.c +++ b/lib/fdtdec.c @@ -1160,7 +1160,7 @@ static int uncompress_blob(const void *src, ulong sz_src, void **dstp) { #if IS_ENABLED(CONFIG_MULTI_DTB_FIT_GZIP) ||\ IS_ENABLED(CONFIG_MULTI_DTB_FIT_LZO) - size_t sz_out = CONFIG_VAL(MULTI_DTB_FIT_UNCOMPRESS_SZ); + size_t sz_out = CONFIG_MULTI_DTB_FIT_UNCOMPRESS_SZ; bool gzip = 0, lzo = 0; ulong sz_in = sz_src; void *dst; @@ -1185,7 +1185,7 @@ static int uncompress_blob(const void *src, ulong sz_src, void **dstp) } } else { # if IS_ENABLED(CONFIG_MULTI_DTB_FIT_USER_DEFINED_AREA) - dst = (void *)CONFIG_VAL(MULTI_DTB_FIT_USER_DEF_ADDR); + dst = (void *)CONFIG_MULTI_DTB_FIT_USER_DEF_ADDR; # else return -ENOTSUPP; # endif diff --git a/scripts/basic/fixdep.c b/scripts/basic/fixdep.c index 82a3b748b65..1cb76dc8b19 100644 --- a/scripts/basic/fixdep.c +++ b/scripts/basic/fixdep.c @@ -482,7 +482,7 @@ static int run_tests(void) CHECKP(buf + 18, out); CHECKP(buf + 22, end);
- strcpy(buf, "CONFIG_VAL(MARY)"); + strcpy(buf, "CONFIG_MARY"); out = parse_config_line(buf, &end); CHECKP(buf + 11, out); CHECKP(buf + 15, end);