Hi Joel,
On 22.03.20 19:53, Joel Johnson wrote:
As with other related ClearFog patches, I haven't received any review responses on this series (http://patchwork.ozlabs.org/project/uboot/list/?series=155760) and would like to ping out for additional review. I'd especially like feedback on the approach for support of multiple SCSI devices, if there a preferred or standardized mechanism I'd be happy to adjust, but I couldn't find any other examples of including multiple SCSI devices in distro_boot. In reviewing again myself there was an initial mental mismatch between CON2/CON3 usage as connection ports and the naming of SCSI_CLEARFOG2/SCSI_CLEARFOG3 as index counters, but otherwise still seems good.
If it's in an acceptable state for inclusion in the next merge window, that's certainly fine too, I'm just looking for a crosscheck.
Let's see, if Baruch and/or Josua have some comments here.
Thanks, Stefan
Thanks! Joel
On 2020-01-28 20:59, Joel Johnson wrote:
Include attempting to boot from SCSI (SATA) devices within generated board distro bootcmd environment. The reasoning for boot ordering is that MMC and USB are external and removable, while when a case is in use, replacing M.2 or mSATA drives requires disassembly. Therefore, to boot SCSI, [bootable] external media must be removed. If SCSI were placed before MMC or USB, then removing a bootable SCSI drive to enable MMC or USB booting would be more difficult.
Signed-off-by: Joel Johnson mrjoel@lixil.net
include/configs/clearfog.h | 7 +++++++ 1 file changed, 7 insertions(+)
diff --git a/include/configs/clearfog.h b/include/configs/clearfog.h index 633187d86f..a452f4b009 100644 --- a/include/configs/clearfog.h +++ b/include/configs/clearfog.h @@ -110,9 +110,16 @@ #define BOOT_TARGET_DEVICES_USB(func) #endif
+#ifdef CONFIG_SCSI +#define BOOT_TARGET_DEVICES_SCSI(func) func(SCSI, scsi, 0) +#else +#define BOOT_TARGET_DEVICES_SCSI(func) +#endif
#define BOOT_TARGET_DEVICES(func) \ BOOT_TARGET_DEVICES_MMC(func) \ BOOT_TARGET_DEVICES_USB(func) \ + BOOT_TARGET_DEVICES_SCSI(func) \ func(PXE, pxe, na) \ func(DHCP, dhcp, na)
Viele Grüße, Stefan