thanks a lot Deng. sorry about previous message postin tat way. Now i was able to compile cmd_fat.c by adding tat CONFIG_CMD_FAT in /include/configs/at91sam9261ek.h. Now i want to use the atmel_spi.c driver in /drivers/spi. can u let me know what to add in the config file? i tried adding if define CONFIG_ATMEL_SPI AT91SAM9261_ID_SPI0 so that it used BUS0 of the atmel SPI controller but the compiler again gave some error which was similar to previous error which i posted . thanks a lot . warm regards, Ravi Kulkarni.
wd wrote:
Dear sunr2007,
Please make sure to read http://www.netmeister.org/news/learn2quote.html
Your message is next to impossible to read as we cannot see who wrote what.
In message 25237459.post@talk.nabble.com you wrote:
Why are you not using a recent tool chain? since i use AT91SAM9261 boards the latest patch available for that
board
is u-boot-1.3.4 so i used u-boot-1.3.4. i used 2009-08 version and compiled but there
is
no support patch file for tat. i got this info frm linux4sam.org.
There are several configurations for the at91sam9261ek board supported in recent U-Boot. Please look again.
compile the u-boot but only few of files compiled. in the /common/ directory i want to compile cmd_fat.c and cmd_spi.c . though these files are
there
in Makefile im unable to compile. may i know what i need to do to compile these files in u-boot? do i need to enable something? thanks.:confused:
You must not trry to compile single files, because you most likely don't get the required options right. Just add these features into your board configuration.
i tried modifying Makefile by changing this particular line COBJS-$(CONFIG_CMD_FAT) += cmd_fat.o to COBJS-y += cmd_fat.o but the compiler gave a error which im posting here
Don't do this. Instead, just add CONFIG_CMD_FAT to your board config file, usualklky include/configs/<name>.h
Then run "make <name>_config" and "make all"
Best regards,
Wolfgang Denk
-- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de Imitation is the sincerest form of plagarism. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot