Hi Jvoty,
On 14/03/2014 08:17, JYOTI DUBEY wrote:
Hello I am trying to bring in u-boot.imx (uboot image of u-boot 2013) onto SPI-NOR of nitrogen 6x board.I used following commands:
sf probe 1 sf erase 0 0x40000 fatload mmc 0:1 12000000 u-boot.imx
reading u-boot.imx 343040 bytes read in 54 ms (6.1 MiB/s)
sf write 0x12000000 0x0 343040
ERROR: attempting write past flash size (0x200000)
Please read *carefully* the i.MX manual. The SOC expects to read the i.MX header at a specific address, depending on the selected media. On most media (SD, SPI,..) this is 0x400. It is wrong to copy u-boot.imx at the beginning of the flash.
And, as already remarked by Wolfgang, U-Boot uses hexadecimal values, not decimal.
You are not erasing enough flash. Check the size, for a nitrogen quad I get:
-rw-rw-r-- 1 stefano stefano 363520 mar 14 10:03 u-boot.imx
You are erasing only 256KB, this is not enough.
Try:
sf erase 0 60000 sf write 0x12000000 400 ${filesize}
Best regards, Stefano Babic