Move IOC initialization to separate function from cache_init function. This is the preparation for the next patch when we will switch to is_isa_arcv2() function using instead of "CONFIG_ISA_ARCV2" ifdef using.
Also it makes cache_init function clear.
Signed-off-by: Eugeniy Paltsev Eugeniy.Paltsev@synopsys.com --- arch/arc/lib/cache.c | 56 ++++++++++++++++++++++++++++------------------------ 1 file changed, 30 insertions(+), 26 deletions(-)
diff --git a/arch/arc/lib/cache.c b/arch/arc/lib/cache.c index a22ffe5..5070e9f 100644 --- a/arch/arc/lib/cache.c +++ b/arch/arc/lib/cache.c @@ -157,6 +157,34 @@ static void __slc_rgn_op(unsigned long paddr, unsigned long sz, const int op)
while (read_aux_reg(ARC_AUX_SLC_CTRL) & SLC_CTRL_BUSY); } + +static void arc_ioc_setup(void) +{ + /* IOC Aperture start is equal to DDR start */ + unsigned int ap_base = CONFIG_SYS_SDRAM_BASE; + /* IOC Aperture size is equal to DDR size */ + long ap_size = CONFIG_SYS_SDRAM_SIZE; + + flush_n_invalidate_dcache_all(); + + if (!is_power_of_2(ap_size) || ap_size < 4096) + panic("IOC Aperture size must be power of 2 and bigger 4Kib"); + + /* + * IOC Aperture size decoded as 2 ^ (SIZE + 2) KB, + * so setting 0x11 implies 512M, 0x12 implies 1G... + */ + write_aux_reg(ARC_AUX_IO_COH_AP0_SIZE, + order_base_2(ap_size / 1024) - 2); + + /* IOC Aperture start must be aligned to the size of the aperture */ + if (ap_base % ap_size != 0) + panic("IOC Aperture start must be aligned to the size of the aperture"); + + write_aux_reg(ARC_AUX_IO_COH_AP0_BASE, ap_base >> 12); + write_aux_reg(ARC_AUX_IO_COH_PARTIAL, 1); + write_aux_reg(ARC_AUX_IO_COH_ENABLE, 1); +} #endif /* CONFIG_ISA_ARCV2 */
#ifdef CONFIG_ISA_ARCV2 @@ -250,32 +278,8 @@ void cache_init(void) #ifdef CONFIG_ISA_ARCV2 read_decode_cache_bcr_arcv2();
- if (ioc_exists) { - /* IOC Aperture start is equal to DDR start */ - unsigned int ap_base = CONFIG_SYS_SDRAM_BASE; - /* IOC Aperture size is equal to DDR size */ - long ap_size = CONFIG_SYS_SDRAM_SIZE; - - flush_n_invalidate_dcache_all(); - - if (!is_power_of_2(ap_size) || ap_size < 4096) - panic("IOC Aperture size must be power of 2 and bigger 4Kib"); - - /* - * IOC Aperture size decoded as 2 ^ (SIZE + 2) KB, - * so setting 0x11 implies 512M, 0x12 implies 1G... - */ - write_aux_reg(ARC_AUX_IO_COH_AP0_SIZE, - order_base_2(ap_size / 1024) - 2); - - /* IOC Aperture start must be aligned to the size of the aperture */ - if (ap_base % ap_size != 0) - panic("IOC Aperture start must be aligned to the size of the aperture"); - - write_aux_reg(ARC_AUX_IO_COH_AP0_BASE, ap_base >> 12); - write_aux_reg(ARC_AUX_IO_COH_PARTIAL, 1); - write_aux_reg(ARC_AUX_IO_COH_ENABLE, 1); - } + if (ioc_exists) + arc_ioc_setup();
read_decode_mmu_bcr();