Re: [U-Boot] [PATCH] Revert "net: phy: delay only if reset handler is registered"

Hi Jörg,

On Mon, Nov 23, 2015 at 4:16 PM, Fabio Estevam festevam@gmail.com wrote:

Hi Jörg ,

On Fri, Nov 20, 2015 at 6:37 PM, Fabio Estevam festevam@gmail.com wrote:

...

Ok, I will test your proposal below on Monday when I get access to my mx6sxsabresd, thanks.

Your proposal worked fine, thanks. Will send it as a formal patch.

Ethernet on mx6cuboxi is also broken because of 59370f3fcd13508 (""net: phy: delay only if reset handler is registered").

I tried doing:

--- a/board/solidrun/mx6cuboxi/mx6cuboxi.c +++ b/board/solidrun/mx6cuboxi/mx6cuboxi.c @@ -143,7 +143,7 @@ static void setup_iomux_enet(void) SETUP_IOMUX_PADS(enet_pads);

gpio_direction_output(ETH_PHY_RESET, 0); - mdelay(2); + mdelay(10); gpio_set_value(ETH_PHY_RESET, 1); }

,but it did not help.

Any suggestions?

Thanks,

Fabio Estevam