Add the clock gate registers as well as the reset register bits for the EMAC and EPHY for the V3s. These are needed by the sun8i network driver.
Signed-off-by: Michael Walle mwalle@kernel.org --- drivers/clk/sunxi/clk_v3s.c | 6 ++++++ 1 file changed, 6 insertions(+)
diff --git a/drivers/clk/sunxi/clk_v3s.c b/drivers/clk/sunxi/clk_v3s.c index 6524c13540e..0402d5ed190 100644 --- a/drivers/clk/sunxi/clk_v3s.c +++ b/drivers/clk/sunxi/clk_v3s.c @@ -17,6 +17,7 @@ static struct ccu_clk_gate v3s_gates[] = { [CLK_BUS_MMC0] = GATE(0x060, BIT(8)), [CLK_BUS_MMC1] = GATE(0x060, BIT(9)), [CLK_BUS_MMC2] = GATE(0x060, BIT(10)), + [CLK_BUS_EMAC] = GATE(0x060, BIT(17)), [CLK_BUS_SPI0] = GATE(0x060, BIT(20)), [CLK_BUS_OTG] = GATE(0x060, BIT(24)),
@@ -31,6 +32,8 @@ static struct ccu_clk_gate v3s_gates[] = { [CLK_BUS_UART1] = GATE(0x06c, BIT(17)), [CLK_BUS_UART2] = GATE(0x06c, BIT(18)),
+ [CLK_BUS_EPHY] = GATE(0x070, BIT(0)), + [CLK_SPI0] = GATE(0x0a0, BIT(31)),
[CLK_USB_PHY0] = GATE(0x0cc, BIT(8)), @@ -45,12 +48,15 @@ static struct ccu_reset v3s_resets[] = { [RST_BUS_MMC0] = RESET(0x2c0, BIT(8)), [RST_BUS_MMC1] = RESET(0x2c0, BIT(9)), [RST_BUS_MMC2] = RESET(0x2c0, BIT(10)), + [RST_BUS_EMAC] = RESET(0x2c0, BIT(17)), [RST_BUS_SPI0] = RESET(0x2c0, BIT(20)), [RST_BUS_OTG] = RESET(0x2c0, BIT(24)),
[RST_BUS_TCON0] = RESET(0x2c4, BIT(4)), [RST_BUS_DE] = RESET(0x2c4, BIT(12)),
+ [RST_BUS_EPHY] = RESET(0x2c8, BIT(2)), + [RST_BUS_I2C0] = RESET(0x2d8, BIT(0)), [RST_BUS_I2C1] = RESET(0x2d8, BIT(1)), [RST_BUS_UART0] = RESET(0x2d8, BIT(16)),