On Thu, May 05, 2022 at 10:51:39AM -0400, Sean Anderson wrote:
Hi Tom,
On 5/4/22 8:06 PM, Tom Rini wrote:
On Fri, Apr 22, 2022 at 02:27:41PM -0400, Sean Anderson wrote:
This converts the fat loader to use spl_load.
Signed-off-by: Sean Anderson sean.anderson@seco.com Reviewed-by: Stefan Roese sr@denx.de
On am335x_evm_defconfig, and booting from a FAT SD card I see: Trying to boot from MMC1 spl_load_image_fat: error reading image u-boot.img, err - 0 SPL: failed to boot from all boot devices ### ERROR ### Please RESET the board ###
Looks like spl_load_image_fat was expecting bytes read and not an errno (and so turned your success into a failure). Will fix.
OK.
Note that while not _this_ patch (but likely the one for raw) breaks booting from my mx6cuboxi via SD card with: Trying to boot from MMC1 [hang]
Hm, if there's a problem you should at least see "mmc_load_image_raw_sector: mmc block read error\n"
Could you enable DEBUG in common/spl/spl.c and common/spl/spl_mmc.c?
U-Boot SPL 2022.07-rc1-00267-g064334e21dde-dirty (May 05 2022 - 11:33:38 -0400)
SPL: board_init_r()
spl_init Trying to boot from MMC1 spl: mmc boot mode: raw hdr read sector 8a, count=1