Hi, Tom,
On Thu, Jan 15, 2015 at 04:08:40PM +0100, Angelo Dureghello wrote:
Dear all,
i would like to post a patch with the m68k generic board support, tested and working here, but of course not tested for all the other m68k boards except mine.
My coldfire board is the "amcore" board not yet accepted.
http://thread.gmane.org/gmane.comp.boot-loaders.u-boot/193661 http://thread.gmane.org/gmane.comp.boot-loaders.u-boot/193660
I need some suggestions on how to proceed now.
I already modified my board config to work with generic board support.
So my thought is to post 2 separate patches: 1
- add generic board (1/1). Each board maintainer should then test it
and report for feedbacks. 2 Re-post a 2/2 patch (v8) of amcore using generic board:
- amcore board (1),
- mcf5307 support (2),
This amcore board is the coldfire base i use here for all the general m68k tests.
With your help commenting on this patch until it is conformant to the last recent coding guidelines could help me and Alison to know what has to be purged / changed, (eventually, if needed) in all other m68k boards code.
What do you think ?
Lets go with #2 and we'll purge the rest of the boards that you don't want to convert and compile test after -rc1. Thanks!
[Alison Wang] Do you mean you will purge the rest of the boards if they are not converted and tested?
I have these boards, such as m52277evb, m5253demo, m53017evb, m5329evb, m5373evb, m54418twr, m54451evb, m54455evb, m547xevb and m548xevb. I think I really need some time to convert and test them.
Best Regards, Alison Wang