Re: [U-Boot] [PATCH v3 00/11] SF: Cadence QSPI driver fixes and clean up

On Tue, Nov 29, 2016 at 1:58 PM, Phil Edworthy phil.edworthy@renesas.com wrote:

This series has fixes, patches to clean the code up, and add support for specifying the sampling edge.

Main changes in v3:

1. Added "spi: cadence_qspi: Use spi mode at the point it is needed" to address comments for SPI pol/phase code.
2. "spi: cadence_qspi: Support specifying the sample edge used" has been split into 3 separate patches.

Phil Edworthy (11): spi: cadence_qspi: Fix clearing of pol/pha bits spi: cadence_qspi: Fix baud rate calculation spi: cadence_qspi: Better debug information on the SPI clock rate spi: cadence_qspi: Use #define for bits instead of bit shifts spi: cadence_qspi: Clean up the #define names spi: cadence_qspi: Use spi mode at the point it is needed spi: cadence_qspi: Remove returns from end of void functions spi: cadence_qspi: Fix CS timings spi: cadence_qspi: Move DT prop code to match layout

Applied to u-boot-spi/master

thanks!