From: Christoph Dietrich christoph.dietrich@keymile.com
This board is similar to TUXX1, but it has differend FPGAs.
Signed-off-by: Christoph Dietrich christoph.dietrich@keymile.com Signed-off-by: Andreas Huber andreas.huber@keymile.com Signed-off-by: Valentin Longchamp valentin.longchamp@keymile.com ---
Changes in v2: None
board/keymile/km83xx/MAINTAINERS | 1 + configs/kmtepr2_defconfig | 4 ++++ include/configs/tuxx1.h | 43 +++++++++++++++++++++++++++++++++------- 3 files changed, 41 insertions(+), 7 deletions(-) create mode 100644 configs/kmtepr2_defconfig
diff --git a/board/keymile/km83xx/MAINTAINERS b/board/keymile/km83xx/MAINTAINERS index cee7e08..c4c3183 100644 --- a/board/keymile/km83xx/MAINTAINERS +++ b/board/keymile/km83xx/MAINTAINERS @@ -7,6 +7,7 @@ F: configs/kmcoge5ne_defconfig F: configs/kmeter1_defconfig F: include/configs/tuxx1.h F: configs/kmopti2_defconfig +F: configs/kmtepr2_defconfig F: include/configs/suvd3.h F: configs/kmvect1_defconfig F: configs/suvd3_defconfig diff --git a/configs/kmtepr2_defconfig b/configs/kmtepr2_defconfig new file mode 100644 index 0000000..5cffd53 --- /dev/null +++ b/configs/kmtepr2_defconfig @@ -0,0 +1,4 @@ +CONFIG_SYS_EXTRA_OPTIONS="KMTEPR2" +CONFIG_PPC=y +CONFIG_MPC83xx=y +CONFIG_TARGET_TUXX1=y diff --git a/include/configs/tuxx1.h b/include/configs/tuxx1.h index 08ead7f..e2ca9e3 100644 --- a/include/configs/tuxx1.h +++ b/include/configs/tuxx1.h @@ -36,6 +36,9 @@ #elif defined(CONFIG_KMOPTI2) #define CONFIG_KM_BOARD_NAME "kmopti2" #define CONFIG_HOSTNAME kmopti2 +#elif defined(CONFIG_KMTEPR2) +#define CONFIG_KM_BOARD_NAME "kmtepr2" +#define CONFIG_HOSTNAME kmtepr2 #else #error ("Board not supported") #endif @@ -47,21 +50,45 @@
#define CONFIG_SYS_APP1_BASE 0xA0000000 /* PAXG */ #define CONFIG_SYS_APP1_SIZE 256 /* Megabytes */ -#if defined(CONFIG_TUXX1) || defined(CONFIG_KMOPTI2) +#if defined(CONFIG_TUXX1) || defined(CONFIG_KMOPTI2) || defined(CONFIG_KMTEPR2) #define CONFIG_SYS_APP2_BASE 0xB0000000 /* PINC3 */ #define CONFIG_SYS_APP2_SIZE 256 /* Megabytes */ #endif
/* * Init Local Bus Memory Controller: - * Device on - * Bank Bus Machine PortSz Size TUDA1 TUXA1 TUGE1 KMSUPX4 KMOPTI2 - * ---- --- ------- ------ ----- --------------------------------------- - * 2 Local GPCM 8 bit 256MB PAXG LPXF PAXI LPXF PAXE - * 3 Local GPCM 8 bit 256MB PINC3 PINC2 unused unused OPI2(16 bit) + * Device on board + * Bank Bus Machine PortSz Size TUDA1 TUXA1 TUGE1 KMSUPX4 KMOPTI2 + * ----------------------------------------------------------------------------- + * 2 Local GPCM 8 bit 256MB PAXG LPXF PAXI LPXF PAXE + * 3 Local GPCM 8 bit 256MB PINC3 PINC2 unused unused OPI2(16 bit) * + * Device on board (continued) + * Bank Bus Machine PortSz Size KMTEPR2 + * ----------------------------------------------------------------------------- + * 2 Local GPCM 8 bit 256MB NVRAM + * 3 Local GPCM 8 bit 256MB TEP2 (16 bit) */
+#if defined(CONFIG_KMTEPRO2) +/* + * Configuration for C2 (NVRAM) on the local bus + */ +#define CONFIG_SYS_LBLAWBAR2_PRELIM CONFIG_SYS_APP1_BASE +#define CONFIG_SYS_LBLAWAR2_PRELIM (LBLAWAR_EN | LBLAWAR_256MB) +#define CONFIG_SYS_BR2_PRELIM (CONFIG_SYS_APP1_BASE | \ + BR_PS_8 | \ + BR_MS_GPCM | \ + BR_V) +#define CONFIG_SYS_OR2_PRELIM (MEG_TO_AM(CONFIG_SYS_APP1_SIZE) | \ + OR_GPCM_CSNT | \ + OR_GPCM_ACS_DIV2 | \ + OR_GPCM_XACS | \ + OR_GPCM_SCY_2 | \ + OR_GPCM_TRLX_SET | \ + OR_GPCM_EHTR_SET | \ + OR_GPCM_EAD) +#else /* * Configuration for C2 on the local bus */ @@ -82,6 +109,8 @@ OR_GPCM_TRLX_SET | \ OR_GPCM_EHTR_CLEAR | \ OR_GPCM_EAD) +#endif + #if defined(CONFIG_TUXX1) /* * Configuration for C3 on the local bus @@ -108,7 +137,7 @@ MxMR_WLFx_2X) #endif
-#if defined(CONFIG_KMOPTI2) +#if defined(CONFIG_KMOPTI2) || defined(CONFIG_KMTEPR2) /* * Configuration for C3 on the local bus */