Hello Tom,
On Fri, Oct 15, 2021 at 2:44 AM Tom Rini trini@konsulko.com wrote:
On Sat, Sep 25, 2021 at 05:05:43PM +0300, Oleksandr Suvorov wrote:
From: Ricardo Salveti ricardo@foundries.io
Make sure to flush, disable caches and interrupts before jumpint to OPTEE. This fixes the SDP->SPL->OPTEE boot flow on iMX6Q and most likely on some other ARM SoCs.
Signed-off-by: Ricardo Salveti ricardo@foundries.io Co-developed-by: Oleksandr Suvorov oleksandr.suvorov@foundries.io Signed-off-by: Oleksandr Suvorov oleksandr.suvorov@foundries.io
arch/arm/lib/spl.c | 11 +++++++++++ common/spl/spl.c | 11 +++++++++-- include/spl.h | 9 +++++++++ 3 files changed, 29 insertions(+), 2 deletions(-)
diff --git a/arch/arm/lib/spl.c b/arch/arm/lib/spl.c index 8e2bdf3536..16e3cd557a 100644 --- a/arch/arm/lib/spl.c +++ b/arch/arm/lib/spl.c @@ -77,3 +77,14 @@ void __noreturn jump_to_image_linux(struct spl_image_info *spl_image) } #endif /* CONFIG_ARM64 */ #endif
+#if CONFIG_IS_ENABLED(OPTEE) +void __noreturn jump_to_image_optee(struct spl_image_info *spl_image) +{
/* flush and turn off caches before jumping to OPTEE */cleanup_before_linux();spl_optee_entry(NULL, NULL, spl_image->fdt_addr,(void *)spl_image->entry_point);+} +#endif diff --git a/common/spl/spl.c b/common/spl/spl.c index d55d3c2848..f3fab3c4d9 100644 --- a/common/spl/spl.c +++ b/common/spl/spl.c @@ -171,6 +171,14 @@ __weak void spl_board_prepare_for_optee(void *fdt) { }
+#if CONFIG_IS_ENABLED(OPTEE) +__weak void __noreturn jump_to_image_optee(struct spl_image_info *spl_image) +{
spl_optee_entry(NULL, NULL, spl_image->fdt_addr,(void *)spl_image->entry_point);+} +#endif
__weak void spl_board_prepare_for_boot(void) { /* Nothing to do! */ @@ -777,8 +785,7 @@ void board_init_r(gd_t *dummy1, ulong dummy2) case IH_OS_TEE: debug("Jumping to U-Boot via OP-TEE\n"); spl_board_prepare_for_optee(spl_image.fdt_addr);
spl_optee_entry(NULL, NULL, spl_image.fdt_addr,(void *)spl_image.entry_point);
jump_to_image_optee(&spl_image); break;#endif #if CONFIG_IS_ENABLED(OPENSBI) diff --git a/include/spl.h b/include/spl.h index afbf39bef4..8e7173d294 100644 --- a/include/spl.h +++ b/include/spl.h @@ -460,6 +460,15 @@ int spl_board_boot_device(u32 boot_device); */ void __noreturn jump_to_image_linux(struct spl_image_info *spl_image);
+/**
- jump_to_image_linux() - Jump to OP-TEE OS from SPL
- This jumps into OP-TEE OS using the information in @spl_image.
- @spl_image: Image description to set up
- */
+void __noreturn jump_to_image_optee(struct spl_image_info *spl_image);
/**
- spl_start_uboot() - Check if SPL should start the kernel or U-Boot
At current, this causes evb-rk3229 and evb-rk3288 to fail to build. A trivial "test on OPTEE_IMAGE" instead leads to warnings about a noreturnn function returning. Please rebase on current master and retest your use cases, thanks!
Thank you for the notes! I've fixed both issues in the 2nd version of the patchset.
-- Tom