On Fri, Apr 9, 2010 at 10:07 AM, prakash bedge prakash.bedge@gmail.com wrote:
Hi Frank,
Why I should use MIRRORX16 in BDI3000 config file?
According to the different flash algorithms described in the BDI manual, this was the closest we found, and it works. What chiptype do you use today?
Can you please tell which boards support the S29GL512P NOR flash?
None yet I think. We'll commit a patch soon which supports the Siemens Digital Powerline Modem (DPM).
Our U-Boot/Linux hardware is based on Analogue & Micros Adder Module, but modified a bit (different flash and SDRAM, contains an FPGA, an AVR and a TI DSP).
Best regards, Frank
Regards, Prakash Bedge On Fri, Apr 9, 2010 at 1:18 PM, Frank Svendsbøe frank.svendsboe@gmail.com wrote:
On Fri, Apr 9, 2010 at 7:26 AM, prakash bedge prakash.bedge@gmail.com wrote:
Hi,
In U-boot I am not seeing the support for Spansion S29GL512P NOR flash.
This chip is CFI compliant so I believe the common CFI driver should work with this chip.
Does U-boot supports S29GL512P NOR flash or I have to implement the functionality to support S29GL512P?
If anyone has tried with S29GL512P NOR flash please share the experiecne.
Hi Prakash,
I can confirm the S29GL512P is working with U-Boot (and Linux). No special work has been done to make it work. Use chiptype MIRRORX16, if you're using a BDI3000 JTAG to flash U-Boot.
Good luck Frank
Thanks & Regards, Prakash
U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot