Since the introduction of the pinctrl and clock driver and the device tree files, remove unneeded hard coded related code from the board file.
Signed-off-by: Wenyou Yang wenyou.yang@atmel.com Reviewed-by: Simon Glass sjg@chromium.org ---
Changes in v3: - Remove Atmel mci related code.
Changes in v2: None
board/atmel/at91sam9x5ek/at91sam9x5ek.c | 78 --------------------------------- 1 file changed, 78 deletions(-)
diff --git a/board/atmel/at91sam9x5ek/at91sam9x5ek.c b/board/atmel/at91sam9x5ek/at91sam9x5ek.c index 0ae42dd158..235b33725d 100644 --- a/board/atmel/at91sam9x5ek/at91sam9x5ek.c +++ b/board/atmel/at91sam9x5ek/at91sam9x5ek.c @@ -14,18 +14,10 @@ #include <asm/arch/gpio.h> #include <lcd.h> #include <atmel_hlcdc.h> -#include <atmel_mci.h> -#ifdef CONFIG_MACB -#include <net.h> -#endif -#include <netdev.h> #ifdef CONFIG_LCD_INFO #include <nand.h> #include <version.h> #endif -#ifdef CONFIG_ATMEL_SPI -#include <spi.h> -#endif
DECLARE_GLOBAL_DATA_PTR;
@@ -92,21 +84,6 @@ static void at91sam9x5ek_nand_hw_init(void) } #endif
-int board_eth_init(bd_t *bis) -{ - int rc = 0; - -#ifdef CONFIG_MACB - if (has_emac0()) - rc = macb_eth_initialize(0, - (void *)ATMEL_BASE_EMAC0, 0x00); - if (has_emac1()) - rc = macb_eth_initialize(1, - (void *)ATMEL_BASE_EMAC1, 0x00); -#endif - return rc; -} - #ifdef CONFIG_LCD vidinfo_t panel_info = { .vl_col = 800, @@ -205,51 +182,6 @@ void lcd_show_board_info(void) #endif /* CONFIG_LCD_INFO */ #endif /* CONFIG_LCD */
-#ifndef CONFIG_DM_SPI -/* SPI chip select control */ -#ifdef CONFIG_ATMEL_SPI -int spi_cs_is_valid(unsigned int bus, unsigned int cs) -{ - return bus == 0 && cs < 2; -} - -void spi_cs_activate(struct spi_slave *slave) -{ - switch (slave->cs) { - case 1: - at91_set_pio_output(AT91_PIO_PORTA, 7, 0); - break; - case 0: - default: - at91_set_pio_output(AT91_PIO_PORTA, 14, 0); - break; - } -} - -void spi_cs_deactivate(struct spi_slave *slave) -{ - switch (slave->cs) { - case 1: - at91_set_pio_output(AT91_PIO_PORTA, 7, 1); - break; - case 0: - default: - at91_set_pio_output(AT91_PIO_PORTA, 14, 1); - break; - } -} -#endif /* CONFIG_ATMEL_SPI */ -#endif - -#ifdef CONFIG_GENERIC_ATMEL_MCI -int board_mmc_init(bd_t *bd) -{ - at91_mci_hw_init(); - - return atmel_mci_init((void *)ATMEL_BASE_HSMCI0); -} -#endif - int board_early_init_f(void) { at91_seriald_hw_init(); @@ -268,14 +200,6 @@ int board_init(void) at91sam9x5ek_nand_hw_init(); #endif
-#ifdef CONFIG_ATMEL_SPI - at91_spi0_hw_init(1 << 4); -#endif - -#ifdef CONFIG_MACB - at91_macb_hw_init(); -#endif - #if defined(CONFIG_USB_OHCI_NEW) || defined(CONFIG_USB_EHCI) at91_uhp_hw_init(); #endif @@ -302,8 +226,6 @@ void at91_spl_board_init(void) at91_mci_hw_init(); #elif CONFIG_SYS_USE_NANDFLASH at91sam9x5ek_nand_hw_init(); -#elif CONFIG_SYS_USE_SPIFLASH - at91_spi0_hw_init(1 << 4); #endif }