On 12/23/21 08:26, Tony Dinh wrote:
Add include configs file for Pogoplug V4 board
Signed-off-by: Tony Dinh mibodhi@gmail.com
(no changes since v1)
include/configs/pogo_v4.h | 94 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 94 insertions(+) create mode 100644 include/configs/pogo_v4.h
diff --git a/include/configs/pogo_v4.h b/include/configs/pogo_v4.h new file mode 100644 index 0000000000..b449986e8c --- /dev/null +++ b/include/configs/pogo_v4.h @@ -0,0 +1,94 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/*
- Copyright (C) 2014-2021 Tony Dinh mibodhi@gmail.com
- Based on
- Copyright (C) 2012
- David Purdy david.c.purdy@gmail.com
- Based on Kirkwood support:
- (C) Copyright 2009
- Marvell Semiconductor <www.marvell.com>
- Written-by: Prafulla Wadaskar prafulla@marvell.com
- */
+#ifndef _CONFIG_POGO_V4_H +#define _CONFIG_POGO_V4_H
+/*
- Machine type definition and ID
- */
+#define MACH_TYPE_POGO_V4 3960 +#define CONFIG_MACH_TYPE MACH_TYPE_POGO_V4
Are you really using the pretty old CONFIG_MACH_TYPE to boot Linux on this device?
+/*
- High Level Configuration Options (easy to change)
- */
+#define CONFIG_FEROCEON_88FR131 /* #define CPU Core subversion */ +#define CONFIG_KW88F6192 /* SOC Name */
At least CONFIG_FEROCEON_88FR131 is available in Kconfig (arch/arm/mach-kirkwood/Kconfig), so there should be no need to add it via some header.
Please double-check other macros in this header as well for availability in Kconfig.
+/*
- Commands configuration
- */
+#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
+/*
- mv-common.h should be defined after CMD configs since it used them
- to enable certain macros
- */
+#include "mv-common.h"
+/*
- Default environment variables
- */
+#define CONFIG_BOOTCOMMAND \
- "setenv bootargs $(bootargs_console); " \
- "run bootcmd_usb; " \
- "bootm 0x00800000 0x01100000 0x2c00000"
+#define CONFIG_EXTRA_ENV_SETTINGS \
- "dtb_file=/boot/dts/" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \
- "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0"\
- "mtdids=nand0=orion_nand\0"\
- "bootargs_console=console=ttyS0,115200\0" \
- "bootcmd_usb=usb start; load usb 0:1 0x00800000 /boot/uImage; " \
- "load usb 0:1 0x01100000 /boot/uInitrd; " \
- "load usb 0:1 0x2c00000 $dtb_file\0"
+/*
- Ethernet Driver configuration
- */
+#ifdef CONFIG_CMD_NET +#define CONFIG_FEATURE_COMMAND_EDITING /* for netconsole */ +#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ +#define CONFIG_PHY_BASE_ADR 0 +#endif /* CONFIG_CMD_NET */
+/*
- File system
- */
+#ifdef CONFIG_CMD_JFFS2 +#define CONFIG_JFFS2_NAND +#define CONFIG_JFFS2_LZO +#endif /* CONFIG_CMD_JFFS2 */
+/*
- SATA Driver configuration
- */
+#ifdef CONFIG_SATA +#define CONFIG_SYS_SATA_MAX_DEVICE 1
This is also in Kconfig. Please make sure to not add any ad-hoc macros here that are Kconfig options now.
Also, please drop the "#ifdef CONFIG_SATA" (and other similar ones) if it's not really select-able.
Thanks, Stefan
+#endif /* CONFIG_SATA */
+/*
- Support large disk for SATA and USB
- */
+#define CONFIG_SYS_64BIT_LBA +#define CONFIG_LBA48
+/*
- Kirkwood GPIO
- */
+#define CONFIG_KIRKWOOD_GPIO
+#endif /* _CONFIG_POGO_V4_H */
Viele Grüße, Stefan Roese