From: Andre Przywara andre.przywara@arm.com
--- drivers/net/sun8i_emac.c | 28 ++++++++++++++++++++-------- 1 file changed, 20 insertions(+), 8 deletions(-)
diff --git a/drivers/net/sun8i_emac.c b/drivers/net/sun8i_emac.c index 4524604126c9..7e57f1d01c8c 100644 --- a/drivers/net/sun8i_emac.c +++ b/drivers/net/sun8i_emac.c @@ -85,7 +85,9 @@
/* IO mux settings */ #define SUN8I_IOMUX_H3 2 -#define SUN8I_IOMUX_R40 5 +#define SUN8I_IOMUX_R40 5 +#define SUN8I_IOMUX_H6 5 +#define SUN8I_IOMUX_H616 2 #define SUN8I_IOMUX 4
/* H3/A64 EMAC Register's offset */ @@ -519,10 +521,10 @@ static int sun8i_emac_eth_start(struct udevice *dev)
static int parse_phy_pins(struct udevice *dev) { - struct emac_eth_dev *priv = dev_get_priv(dev); int offset; const char *pin_name; int drive, pull = SUN4I_PINCTRL_NO_PULL, i; + u32 iomux;
offset = fdtdec_lookup_phandle(gd->fdt_blob, dev_of_offset(dev), "pinctrl-0"); @@ -549,6 +551,21 @@ static int parse_phy_pins(struct udevice *dev) else if (fdt_get_property(gd->fdt_blob, offset, "bias-pull-down", NULL)) pull = SUN4I_PINCTRL_PULL_DOWN;
+ /* + * The GPIO pinmux value is an integration choice, so depends on the + * SoC, not the EMAC variant. + */ + if (IS_ENABLED(CONFIG_MACH_SUN8I_H3)) + iomux = SUN8I_IOMUX_H3; + else if (IS_ENABLED(CONFIG_MACH_SUN8I_R40)) + iomux = SUN8I_IOMUX_R40; + else if (IS_ENABLED(CONFIG_MACH_SUN50I_H6)) + iomux = SUN8I_IOMUX_H6; + else if (IS_ENABLED(CONFIG_MACH_SUN50I_H616)) + iomux = SUN8I_IOMUX_H616; + else + iomux = SUN8I_IOMUX; + for (i = 0; ; i++) { int pin;
@@ -561,12 +578,7 @@ static int parse_phy_pins(struct udevice *dev) if (pin < 0) continue;
- if (priv->variant == H3_EMAC) - sunxi_gpio_set_cfgpin(pin, SUN8I_IOMUX_H3); - else if (priv->variant == R40_GMAC || priv->variant == H6_EMAC) - sunxi_gpio_set_cfgpin(pin, SUN8I_IOMUX_R40); - else - sunxi_gpio_set_cfgpin(pin, SUN8I_IOMUX); + sunxi_gpio_set_cfgpin(pin, iomux);
if (drive != ~0) sunxi_gpio_set_drv(pin, drive);