Manuel,
we do this with conditional boot depending on environment settings, e.g. "netboot" yes or no.
If netboot==no then omit bootp/dhcp completely and proceed to boot from flash. Otherwise try netboot and stick to the timeout. Autoneg can indeed take some time ...
This can easily be done with a bootscript, i.e. bootcmd=autoscr valid_addr.
regards, Andre
Manuel Sahm schrieb:
Hello,
isn´t anybody out there who could help me ?
Thank you
"Manuel Sahm" Manuel.Sahm@feig.de 26.08.2008 10:44 >>>
Hello,
I have a problem concnering the LAN Connection Timeout.
I uses a Teridian Phy connected via MII Interface to an AT91SAM9260. All works fine. If I boot my system uboot comes up and detects the connection very quickly, so that my system boots fast. But if I have no lan cable plugged in when I boot my system, it takes some seconds to detect that no lan cable is plugged in and a timeout occurs.
How could I speed up my booting sequence if there is no lan cable plugged in ?
Thank you very much
Best regards
Manuel Sahm
U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
MATRIX VISION GmbH, Talstra�e 16, DE-71570 Oppenweiler - Registergericht: Amtsgericht Stuttgart, HRB 271090 Gesch�ftsf�hrer: Gerhard Thullner, Werner Armingeon, Uwe Furtner