Sync the interrupt properties with the ones from Linux. Also use the constants provided by the dt-bindings header. Please note, that there are actual changes/fixes in the irq flags. U-Boot won't use the interrupt properties anyway. It's just to be consistent with the Linux device tree.
Signed-off-by: Michael Walle michael@walle.cc --- changes since v1: - n/a changes since v2: - new patch changes since v3: - none
arch/arm/dts/fsl-ls1028a.dtsi | 55 ++++++++++++++++++++--------------- 1 file changed, 31 insertions(+), 24 deletions(-)
diff --git a/arch/arm/dts/fsl-ls1028a.dtsi b/arch/arm/dts/fsl-ls1028a.dtsi index 774e477542..5365bfb1a8 100644 --- a/arch/arm/dts/fsl-ls1028a.dtsi +++ b/arch/arm/dts/fsl-ls1028a.dtsi @@ -6,6 +6,8 @@ * */
+#include <dt-bindings/interrupt-controller/arm-gic.h> + / { compatible = "fsl,ls1028a"; interrupt-parent = <&gic>; @@ -38,15 +40,20 @@ <0x0 0x06040000 0 0x40000>; #interrupt-cells = <3>; interrupt-controller; - interrupts = <1 9 0x4>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_RAW(0xf) | + IRQ_TYPE_LEVEL_LOW)>; };
timer { compatible = "arm,armv8-timer"; - interrupts = <1 13 0x8>, /* Physical Secure PPI, active-low */ - <1 14 0x8>, /* Physical Non-Secure PPI, active-low */ - <1 11 0x8>, /* Virtual PPI, active-low */ - <1 10 0x8>; /* Hypervisor PPI, active-low */ + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_LEVEL_LOW)>; };
fspi: flexspi@20c0000 { @@ -58,7 +65,7 @@ reg-names = "fspi_base", "fspi_mmap"; clocks = <&clockgen 4 3>, <&clockgen 4 3>; clock-names = "fspi_en", "fspi"; - interrupts = <0 25 0x4>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; };
@@ -66,7 +73,7 @@ device_type = "serial"; compatible = "fsl,ns16550", "ns16550a"; reg = <0x0 0x21c0500 0x0 0x100>; - interrupts = <0 32 0x1>; /* edge triggered */ + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; };
@@ -74,7 +81,7 @@ device_type = "serial"; compatible = "fsl,ns16550", "ns16550a"; reg = <0x0 0x21c0600 0x0 0x100>; - interrupts = <0 32 0x1>; /* edge triggered */ + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; };
@@ -150,7 +157,7 @@ #address-cells = <1>; #size-cells = <0>; reg = <0x0 0x2000000 0x0 0x10000>; - interrupts = <0 34 0x4>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; clock-names = "i2c"; clocks = <&clockgen 4 0>; status = "disabled"; @@ -161,7 +168,7 @@ #address-cells = <1>; #size-cells = <0>; reg = <0x0 0x2010000 0x0 0x10000>; - interrupts = <0 34 0x4>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; clock-names = "i2c"; clocks = <&clockgen 4 0>; status = "disabled"; @@ -172,7 +179,7 @@ #address-cells = <1>; #size-cells = <0>; reg = <0x0 0x2020000 0x0 0x10000>; - interrupts = <0 35 0x4>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; clock-names = "i2c"; clocks = <&clockgen 4 0>; status = "disabled"; @@ -183,7 +190,7 @@ #address-cells = <1>; #size-cells = <0>; reg = <0x0 0x2030000 0x0 0x10000>; - interrupts = <0 35 0x4>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; clock-names = "i2c"; clocks = <&clockgen 4 0>; status = "disabled"; @@ -194,7 +201,7 @@ #address-cells = <1>; #size-cells = <0>; reg = <0x0 0x2040000 0x0 0x10000>; - interrupts = <0 74 0x4>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; clock-names = "i2c"; clocks = <&clockgen 4 0>; status = "disabled"; @@ -205,7 +212,7 @@ #address-cells = <1>; #size-cells = <0>; reg = <0x0 0x2050000 0x0 0x10000>; - interrupts = <0 74 0x4>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; clock-names = "i2c"; clocks = <&clockgen 4 0>; status = "disabled"; @@ -216,7 +223,7 @@ #address-cells = <1>; #size-cells = <0>; reg = <0x0 0x2060000 0x0 0x10000>; - interrupts = <0 75 0x4>; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; clock-names = "i2c"; clocks = <&clockgen 4 0>; status = "disabled"; @@ -227,7 +234,7 @@ #address-cells = <1>; #size-cells = <0>; reg = <0x0 0x2070000 0x0 0x10000>; - interrupts = <0 75 0x4>; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; clock-names = "i2c"; clocks = <&clockgen 4 0>; status = "disabled"; @@ -236,7 +243,7 @@ usb1: usb3@3100000 { compatible = "fsl,layerscape-dwc3"; reg = <0x0 0x3100000 0x0 0x10000>; - interrupts = <0 80 0x4>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; dr_mode = "host"; status = "disabled"; }; @@ -244,7 +251,7 @@ usb2: usb3@3110000 { compatible = "fsl,layerscape-dwc3"; reg = <0x0 0x3110000 0x0 0x10000>; - interrupts = <0 81 0x4>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; dr_mode = "host"; status = "disabled"; }; @@ -254,7 +261,7 @@ #address-cells = <1>; #size-cells = <0>; reg = <0x0 0x2100000 0x0 0x10000>; - interrupts = <0 26 0x4>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; clock-names = "dspi"; clocks = <&clockgen 4 0>; num-cs = <5>; @@ -267,7 +274,7 @@ #address-cells = <1>; #size-cells = <0>; reg = <0x0 0x2110000 0x0 0x10000>; - interrupts = <0 26 0x4>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; clock-names = "dspi"; clocks = <&clockgen 4 0>; num-cs = <5>; @@ -280,7 +287,7 @@ #address-cells = <1>; #size-cells = <0>; reg = <0x0 0x2120000 0x0 0x10000>; - interrupts = <0 26 0x4>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; clock-names = "dspi"; clocks = <&clockgen 4 0>; num-cs = <5>; @@ -291,7 +298,7 @@ esdhc0: esdhc@2140000 { compatible = "fsl,esdhc"; reg = <0x0 0x2140000 0x0 0x10000>; - interrupts = <0 28 0x4>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; big-endian; bus-width = <4>; status = "disabled"; @@ -300,7 +307,7 @@ esdhc1: esdhc@2150000 { compatible = "fsl,esdhc"; reg = <0x0 0x2150000 0x0 0x10000>; - interrupts = <0 63 0x4>; + interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; big-endian; non-removable; bus-width = <4>; @@ -312,7 +319,7 @@ reg = <0x0 0x3200000 0x0 0x10000 /* ccsr sata base */ 0x7 0x100520 0x0 0x4>; /* ecc sata addr*/ reg-names = "sata-base", "ecc-addr"; - interrupts = <0 133 4>; + interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; };