On 10/03/2016 02:39 AM, AneoX wrote:
Emmc Card was the new one, so i just burn a dump of working sd. Previously sd have been wired to board for test.
Board is a custom, like olinuxino lime which with nand and sd slot, 512 mb ram. So i using it defconfig and in case of sd card, it works. Emmc lines has external pullups according to the datasheet.
Well, i needs to get more information..If you guess that seems to return 0 from block_read().. then you can find which condition was hit..is it impossible?
If you can share more debug message..then i will help you.
Best Regards, Jaehoon Chung
2 окт. 2016 г. 23:28 пользователь "Jagan Teki" jagannadh.teki@gmail.com написал:
On Sun, Oct 2, 2016 at 10:45 PM, AneoX aneox.inbox@gmail.com wrote:
Like a sd card. I have emmc to sd adapter, so
dd if=u-boot-sunxi-with-spl.bin of=/dev/sdb bs=1024 seek=8
I guess you cleaned[1] the card before doing this?
and then just solder emmc to my board.
OK, which a20 board?
[1] http://linux-sunxi.org/Bootable_SD_card
thanks!
Jagan Teki Free Software Engineer | www.openedev.com U-Boot, Linux | Upstream Maintainer Hyderabad, India. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot