On Tue, May 26, 2020 at 9:02 AM Frank Wang frank.wang@rock-chips.com wrote:
This series add quirks for DWC3 and add Rockchip RK3399 USB3.0 host support.
The function has been tested pass on rk3399-evb and roc-rk3399-pc board.
For V6 update:
- Use [PATCH v6 04/16] instead of [PATCH v5 05/16] to fix that the current Generic PHY subsystem is unable to find PHY if the PHY node is not part of the root structure.
- Add 'Reviewed-by' tag for all patches except [PATCH v6 04/16].
For V5 update:
- Fix dwc3-generic driver followed Marek's comments for [PATCH v4 12/16].
- Add 'Reviewed-by' and 'Tested-by' tag for [PATCH v4 07/16] and [PATCH v4 08/16].
For V4 update:
- Collect Jagan's all fixed patches [1].
- Amend specific u-boot changes from dts to dtsi for [PATCH v3 6/7].
For V3 update:
- Fix compile error for [PATCH v2 1/9].
- Use Jagan's Type-C driver instead of [PATCH v2 5/9].
- Cleanup dts changes for [PATCH v2 7/9].
- Cleanup config changes for [PATCH v2 8/9] and [PATCH v2 9/9].
For V2 update:
- Amend type-c driver followed Jagan's comments for [PATCH 5/8].
- Fix dts commit for [PATCH 7/8].
- Split RK3399 default config for [PATCH 8/8].
- Add 'Reviewed-by' tag for [PATCH 1/8], [PATCH 2/8] and [PATCH 3/8].
[1] https://patchwork.ozlabs.org/project/uboot/cover/20200506075025.1677-1-jagan...
BR, Frank
Frank Wang (8): arm: mach-rockchip: bind sub-nodes for rk3399_syscon usb: dwc3: add dis_enblslpm_quirk usb: dwc3: add dis_u2_freeclk_exists_quirk usb: dwc3: amend UTMI/UTMIW phy interface setup usb: dwc3: add make compatible for rockchip platform driver: usb: drop legacy rockchip xhci driver ARM: dts: rk3399-evb: usb3.0 host support configs: evb-rk3399: update support usb3.0 host
I have a new sandisk Type C and A storage disk. Here are the tests in roc-rk3399-pc.
=> usb tree USB device tree: 1 Hub (480 Mb/s, 0mA) u-boot EHCI Host Controller
1 Hub (480 Mb/s, 0mA) | u-boot EHCI Host Controller | +-2 Hub (480 Mb/s, 100mA) USB 2.0 Hub [MTT]
1 Hub (5 Gb/s, 0mA) U-Boot XHCI Host Controller
=> usb reset resetting USB... Bus usb@fe380000: USB EHCI 1.00 Bus usb@fe3c0000: USB EHCI 1.00 Bus dwc3: usb maximum-speed not found Register 2000140 NbrPorts 2 Starting the controller USB XHCI 1.10 scanning bus usb@fe380000 for devices... 1 USB Device(s) found scanning bus usb@fe3c0000 for devices... 2 USB Device(s) found scanning bus dwc3 for devices... cannot reset port 1!? 2 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found => usb tree USB device tree: 1 Hub (480 Mb/s, 0mA) u-boot EHCI Host Controller
1 Hub (480 Mb/s, 0mA) | u-boot EHCI Host Controller | +-2 Hub (480 Mb/s, 100mA) USB 2.0 Hub [MTT]
1 Hub (5 Gb/s, 0mA) | U-Boot XHCI Host Controller | +-2 Mass Storage (5 Gb/s, 224mA) SanDisk Dual Drive 040130e3ee554b7078843f4eb331646
=> usb reset resetting USB... Bus usb@fe380000: USB EHCI 1.00 Bus usb@fe3c0000: USB EHCI 1.00 Bus dwc3: usb maximum-speed not found Register 2000140 NbrPorts 2 Starting the controller USB XHCI 1.10 scanning bus usb@fe380000 for devices... 2 USB Device(s) found scanning bus usb@fe3c0000 for devices... 2 USB Device(s) found scanning bus dwc3 for devices... 1 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found => usb tree USB device tree: 1 Hub (480 Mb/s, 0mA) | u-boot EHCI Host Controller | +-2 Mass Storage (480 Mb/s, 224mA) SanDisk Dual Drive 040130e3ee554b7078843f4eb331646
1 Hub (480 Mb/s, 0mA) | u-boot EHCI Host Controller | +-2 Hub (480 Mb/s, 100mA) USB 2.0 Hub [MTT]
1 Hub (5 Gb/s, 0mA) U-Boot XHCI Host Controller
=> usb reset resetting USB... Bus usb@fe380000: USB EHCI 1.00 Bus usb@fe3c0000: USB EHCI 1.00 Bus dwc3: usb maximum-speed not found Register 2000140 NbrPorts 2 Starting the controller USB XHCI 1.10 scanning bus usb@fe380000 for devices... 1 USB Device(s) found scanning bus usb@fe3c0000 for devices... EHCI timed out on TD - token=0x80008d80
USB device not accepting new address (error=22) 2 USB Device(s) found scanning bus dwc3 for devices... 1 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found => resetting USB... Bus usb@fe380000: USB EHCI 1.00 Bus usb@fe3c0000: USB EHCI 1.00 Bus dwc3: usb maximum-speed not found Register 2000140 NbrPorts 2 Starting the controller USB XHCI 1.10 scanning bus usb@fe380000 for devices... 1 USB Device(s) found scanning bus usb@fe3c0000 for devices... 3 USB Device(s) found scanning bus dwc3 for devices... 1 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found => usb tree USB device tree: 1 Hub (480 Mb/s, 0mA) u-boot EHCI Host Controller
1 Hub (480 Mb/s, 0mA) | u-boot EHCI Host Controller | +-2 Hub (480 Mb/s, 100mA) | USB 2.0 Hub [MTT] | +-3 Mass Storage (480 Mb/s, 224mA) SanDisk Dual Drive 040130e3ee554b7078843f4eb331646
1 Hub (5 Gb/s, 0mA) U-Boot XHCI Host Controller
=> usb reset resetting USB... Bus usb@fe380000: USB EHCI 1.00 Bus usb@fe3c0000: USB EHCI 1.00 Bus dwc3: usb maximum-speed not found Register 2000140 NbrPorts 2 Starting the controller USB XHCI 1.10 scanning bus usb@fe380000 for devices... 1 USB Device(s) found scanning bus usb@fe3c0000 for devices... EHCI timed out on TD - token=0x80008d80
USB device not accepting new address (error=22) 2 USB Device(s) found scanning bus dwc3 for devices... 1 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found => usb reset resetting USB... Bus usb@fe380000: USB EHCI 1.00 Bus usb@fe3c0000: USB EHCI 1.00 Bus dwc3: usb maximum-speed not found Register 2000140 NbrPorts 2 Starting the controller USB XHCI 1.10 scanning bus usb@fe380000 for devices... 1 USB Device(s) found scanning bus usb@fe3c0000 for devices... 3 USB Device(s) found scanning bus dwc3 for devices... 1 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found => usb tree USB device tree: 1 Hub (480 Mb/s, 0mA) u-boot EHCI Host Controller
1 Hub (480 Mb/s, 0mA) | u-boot EHCI Host Controller | +-2 Hub (480 Mb/s, 100mA) | USB 2.0 Hub [MTT] | +-3 Mass Storage (480 Mb/s, 224mA) SanDisk Dual Drive 040130e3ee554b7078843f4eb331646
1 Hub (5 Gb/s, 0mA) U-Boot XHCI Host Controller
Jagan.