Hi,
On 29.11.2016 17:31, Stefano Babic wrote:
On 16/09/2016 15:45, Marcin Niestroj wrote:
Hi,
These patches add support for liteSOM (http://grinn-global.com/litesom/), and liteBoard (which uses liteSOM as it's base).
liteSOM consists of processor (NXP i.MX6UL), RAM memory (up to 512M DDR3) and flash (eMMC card). The idea is that every board vendor can use liteSOM as it's base for designed board. Hence, we need a way to reuse common code between those board.
liteBoard is a development kit (and reference platform for liteSOM), that mainly shows possibilities and use cases of liteSOM.
Patches were developed and tested on 2016.09.
Marcin Niestroj (2): ARM: imx6ul: Add support for liteSOM board/liteboard: Add support for liteBoard
arch/arm/Kconfig | 2 + arch/arm/Makefile | 1 + arch/arm/cpu/armv7/mx6/Kconfig | 5 + arch/arm/mach-litesom/Kconfig | 6 + arch/arm/mach-litesom/Makefile | 6 + arch/arm/mach-litesom/include/mach/litesom.h | 16 ++ arch/arm/mach-litesom/litesom.c | 200 ++++++++++++++++++++ board/grinn/liteboard/Kconfig | 12 ++ board/grinn/liteboard/MAINTAINERS | 6 + board/grinn/liteboard/Makefile | 6 + board/grinn/liteboard/README | 31 +++ board/grinn/liteboard/board.c | 270 +++++++++++++++++++++++++++ configs/liteboard_defconfig | 22 +++ include/configs/liteboard.h | 174 +++++++++++++++++ 14 files changed, 757 insertions(+) create mode 100644 arch/arm/mach-litesom/Kconfig create mode 100644 arch/arm/mach-litesom/Makefile create mode 100644 arch/arm/mach-litesom/include/mach/litesom.h create mode 100644 arch/arm/mach-litesom/litesom.c create mode 100644 board/grinn/liteboard/Kconfig create mode 100644 board/grinn/liteboard/MAINTAINERS create mode 100644 board/grinn/liteboard/Makefile create mode 100644 board/grinn/liteboard/README create mode 100644 board/grinn/liteboard/board.c create mode 100644 configs/liteboard_defconfig create mode 100644 include/configs/liteboard.h
Applied to u-boot-imx, thanks !
I don't see it in u-boot-imx. However I have rebased this patch set on 2017.01-rc1, so it now builds correctly. Please see v2 patches, that I have sent just now.
Best regards, Stefano Babic