+mx31pdk_nand_config : unconfig
- @mkdir -p $(obj)include $(obj)board/freescale/mx31pdk
- @mkdir -p $(obj)nand_spl/board/freescale/mx31pdk
- @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
- @$(MKCONFIG) -n $@ -a mx31pdk arm arm1136 mx31pdk freescale mx31
- @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
IIRC no need it will generate from the config.h
I don't understand the comment. What will generate what from config.h?
the automake.mk
omap2420h4_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm1136 omap2420h4 NULL omap24xx
diff --git a/board/freescale/mx31pdk/config.mk b/board/freescale/mx31pdk/config.mk index d34dc02..dcaa09f 100644 --- a/board/freescale/mx31pdk/config.mk +++ b/board/freescale/mx31pdk/config.mk @@ -1 +1,5 @@ +ifdef CONFIG_NAND_SPL +TEXT_BASE = 0x87ec0000 +else TEXT_BASE = 0x87f00000 +endif
+.macro DELAY loops
- ldr r2, =\loops
+1:
- subs r2, r2, #1
- nop
- bcs 1b
+.endm
NACK as already reply to the kirwood patch we must have common macro please use the attached file as based work
I don't see any file attached to you e-mail, so which attached file? Can you point to the relevant kirkwood patch? Is the patch in some git-tree?
no not yet so I've forget to re-attached it
+.globl lowlevel_init +lowlevel_init:
- /* Also setup the Peripheral Port Remap register inside the core */
- ldr r0, =ARM_PPMRR /* start from AIPS 2GB region */
- mcr p15, 0, r0, c15, c2, 4
for all hard code value please use macro and if possible macro to generate them
Hmm. You want me to create a macro that expands to the above code?
no I mean macro for 0xB8001010, 0x0000000c, etc... and if possible macro to generate these value
- REG IPU_CONF, IPU_CONF_DI_EN
- REG CCM_CCMR, 0x074B0BF5
- REG 0xB8001010, 0x0000000c
Best Regards, J.