On Saturday 04 January 2014 08:34 PM, Jagannadha Sutradharudu Teki wrote:
This a suffix series for http://u-boot.10912.n7.nabble.com/PATCH-v4-00-36-sf-Add-common-probe-and-ext... for adding extended read and quad read/write commands support.
Concept: "Implementation will discover the fastest command by taking the supported commands from flash and a controller. Controller supported commands will always been a priority."
The above concept is changed in this series as couple of reviews from earlier ones.
- Implementation concept will apply on read commands.
- As we have two write commands as of now – so this series is not trying to discover the fastest write command
- The respective command modes are given to the controller driver side as a form of SPI RX/RX operation modes - so sf definitions will not be part of SPI driver side.
Testing branch: $ git clone git://git.denx.de/u-boot-spi.git $ cd u-boot-spi $ git checkout -b master-quad origin/master-quad
REQUEST FOR ALL SPI CODE CONTRIBUTORS/USERS, PLEASE TEST THESE CHANGES W.R.T YOUR HW IF POSSIBLE.
Please let me know for any issues/concerns/questions.
-- Thanks, Jagan.
Changes for v6:
- Divided flash reg ops code
- sf_ops.c clean
Changes for v5: - Re-implemented write command log - not trying to discover the fastest write - Added SPI RX/TX operation modes - SPI flash parts are moved into sf_params.c file - Added QUAD_IO_FAST read support - Discovred the read dummy_cycles based on configured read cmd - Added set QEB support for macronix flash - Enabled quad read/write cmd support for macronix flash Changes for v4: Changes for v3: Changes for v2: - none
Jagannadha Sutradharudu Teki (12): sf: Add extended read commands support sf: Add quad read/write commands support sf: ops: Add configuration register writing support sf: Set quad enable bit support sf: probe: Enable RD_FULL and WR_QPP sf: Separate the flash params table sf: Add QUAD_IO_FAST read support sf: Discover read dummy_cycles sf: Add macronix set QEB support sf: probe: Enable macronix quad read/write cmds support sf: Divide flash register ops from QEB code sf: Code cleanups
drivers/mtd/spi/Makefile | 4 +- drivers/mtd/spi/sf_internal.h | 31 +++++- drivers/mtd/spi/sf_ops.c | 71 ++++++++++-- drivers/mtd/spi/sf_params.c | 130 ++++++++++++++++++++++ drivers/mtd/spi/sf_probe.c | 246 +++++++++++++++++++----------------------- include/spi.h | 17 +++ include/spi_flash.h | 43 ++++++++ 7 files changed, 393 insertions(+), 149 deletions(-) create mode 100644 drivers/mtd/spi/sf_params.c
Apart from the couple of comments given, this series looks good to me.