When the ti814x_evm config was removed most, but not all, of the relevant support code was remove. Get rid of what was missed.
Fixes: 50b532686849 ("ti814x: Remove platform") Signed-off-by: Tom Rini trini@konsulko.com --- arch/arm/include/asm/arch-am33xx/clock.h | 2 +- .../include/asm/arch-am33xx/clock_ti81xx.h | 36 +- arch/arm/include/asm/arch-am33xx/hardware.h | 2 - .../include/asm/arch-am33xx/hardware_ti814x.h | 60 --- .../include/asm/arch-am33xx/mmc_host_def.h | 5 +- arch/arm/include/asm/arch-am33xx/mux.h | 2 - arch/arm/include/asm/arch-am33xx/mux_ti814x.h | 311 ------------- arch/arm/include/asm/arch-am33xx/omap.h | 2 +- arch/arm/include/asm/arch-am33xx/spl.h | 16 +- arch/arm/mach-omap2/Kconfig | 8 - arch/arm/mach-omap2/am33xx/Kconfig | 10 - arch/arm/mach-omap2/am33xx/Makefile | 1 - arch/arm/mach-omap2/am33xx/clock_ti814x.c | 410 ------------------ arch/arm/mach-omap2/am33xx/emif4.c | 20 - arch/arm/mach-omap2/boot-common.c | 2 +- drivers/i2c/Kconfig | 2 +- drivers/net/ti/cpsw.c | 4 - include/configs/ti814x_evm.h | 102 ----- 18 files changed, 12 insertions(+), 983 deletions(-) delete mode 100644 arch/arm/include/asm/arch-am33xx/hardware_ti814x.h delete mode 100644 arch/arm/include/asm/arch-am33xx/mux_ti814x.h delete mode 100644 arch/arm/mach-omap2/am33xx/clock_ti814x.c delete mode 100644 include/configs/ti814x_evm.h
diff --git a/arch/arm/include/asm/arch-am33xx/clock.h b/arch/arm/include/asm/arch-am33xx/clock.h index 79e3b8c7d9f9..ad25b3e8aa0f 100644 --- a/arch/arm/include/asm/arch-am33xx/clock.h +++ b/arch/arm/include/asm/arch-am33xx/clock.h @@ -13,7 +13,7 @@ #include <asm/arch/clocks_am33xx.h> #include <asm/arch/hardware.h>
-#if defined(CONFIG_TI816X) || defined(CONFIG_TI814X) +#if defined(CONFIG_TI816X) #include <asm/arch/clock_ti81xx.h> #endif
diff --git a/arch/arm/include/asm/arch-am33xx/clock_ti81xx.h b/arch/arm/include/asm/arch-am33xx/clock_ti81xx.h index f0699229a338..d22d95870631 100644 --- a/arch/arm/include/asm/arch-am33xx/clock_ti81xx.h +++ b/arch/arm/include/asm/arch-am33xx/clock_ti81xx.h @@ -44,9 +44,7 @@ struct cm_alwon { unsigned int mmu_clkstctrl; unsigned int mmucfg_clkstctrl; unsigned int ocmc0clkstctrl; -#if defined(CONFIG_TI814X) - unsigned int vcpclkstctrl; -#elif defined(CONFIG_TI816X) +#if defined(CONFIG_TI816X) unsigned int ocmc1clkstctrl; #endif unsigned int mpuclkstctrl; @@ -67,16 +65,7 @@ struct cm_alwon { unsigned int gpio1clkctrl; unsigned int i2c0clkctrl; unsigned int i2c1clkctrl; -#if defined(CONFIG_TI814X) - unsigned int mcasp345clkctrl; - unsigned int atlclkctrl; - unsigned int mlbclkctrl; - unsigned int pataclkctrl; - unsigned int resv1[1]; - unsigned int uart3clkctrl; - unsigned int uart4clkctrl; - unsigned int uart5clkctrl; -#elif defined(CONFIG_TI816X) +#if defined(CONFIG_TI816X) unsigned int resv1[1]; unsigned int timer1clkctrl; unsigned int timer2clkctrl; @@ -93,16 +82,12 @@ struct cm_alwon { unsigned int mmudataclkctrl; unsigned int resv2[2]; unsigned int mmucfgclkctrl; -#if defined(CONFIG_TI814X) - unsigned int resv3[2]; -#elif defined(CONFIG_TI816X) +#if defined(CONFIG_TI816X) unsigned int resv3[1]; unsigned int sdioclkctrl; #endif unsigned int ocmc0clkctrl; -#if defined(CONFIG_TI814X) - unsigned int vcpclkctrl; -#elif defined(CONFIG_TI816X) +#if defined(CONFIG_TI816X) unsigned int ocmc1clkctrl; #endif unsigned int resv4[2]; @@ -112,9 +97,7 @@ struct cm_alwon { unsigned int ethernet0clkctrl; unsigned int ethernet1clkctrl; unsigned int mpuclkctrl; -#if defined(CONFIG_TI814X) - unsigned int debugssclkctrl; -#elif defined(CONFIG_TI816X) +#if defined(CONFIG_TI816X) unsigned int resv6[1]; #endif unsigned int l3clkctrl; @@ -126,14 +109,7 @@ struct cm_alwon { unsigned int tptc1clkctrl; unsigned int tptc2clkctrl; unsigned int tptc3clkctrl; -#if defined(CONFIG_TI814X) - unsigned int resv6[4]; - unsigned int dcan01clkctrl; - unsigned int mmchs0clkctrl; - unsigned int mmchs1clkctrl; - unsigned int mmchs2clkctrl; - unsigned int custefuseclkctrl; -#elif defined(CONFIG_TI816X) +#if defined(CONFIG_TI816X) unsigned int sr0clkctrl; unsigned int sr1clkctrl; #endif diff --git a/arch/arm/include/asm/arch-am33xx/hardware.h b/arch/arm/include/asm/arch-am33xx/hardware.h index 0508b8c912ab..2d7f9da3652c 100644 --- a/arch/arm/include/asm/arch-am33xx/hardware.h +++ b/arch/arm/include/asm/arch-am33xx/hardware.h @@ -16,8 +16,6 @@ #include <asm/arch/hardware_am33xx.h> #elif defined(CONFIG_TI816X) #include <asm/arch/hardware_ti816x.h> -#elif defined(CONFIG_TI814X) -#include <asm/arch/hardware_ti814x.h> #elif defined(CONFIG_AM43XX) #include <asm/arch/hardware_am43xx.h> #endif diff --git a/arch/arm/include/asm/arch-am33xx/hardware_ti814x.h b/arch/arm/include/asm/arch-am33xx/hardware_ti814x.h deleted file mode 100644 index b00d592bc31a..000000000000 --- a/arch/arm/include/asm/arch-am33xx/hardware_ti814x.h +++ /dev/null @@ -1,60 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * hardware_ti814x.h - * - * TI814x hardware specific header - * - * Copyright (C) 2013, Texas Instruments, Incorporated - http://www.ti.com/ - */ - -#ifndef __AM33XX_HARDWARE_TI814X_H -#define __AM33XX_HARDWARE_TI814X_H - -/* Module base addresses */ - -/* UART Base Address */ -#define UART0_BASE 0x48020000 - -/* Watchdog Timer */ -#define WDT_BASE 0x481C7000 - -/* Control Module Base Address */ -#define CTRL_BASE 0x48140000 -#define CTRL_DEVICE_BASE 0x48140600 - -/* PRCM Base Address */ -#define PRCM_BASE 0x48180000 -#define CM_PER 0x44E00000 -#define CM_WKUP 0x44E00400 - -#define PRM_RSTCTRL (PRCM_BASE + 0x00A0) -#define PRM_RSTST (PRM_RSTCTRL + 8) - -/* PLL Subsystem Base Address */ -#define PLL_SUBSYS_BASE 0x481C5000 - -/* VTP Base address */ -#define VTP0_CTRL_ADDR 0x48140E0C -#define VTP1_CTRL_ADDR 0x48140E10 - -/* DDR Base address */ -#define DDR_PHY_CMD_ADDR 0x47C0C400 -#define DDR_PHY_DATA_ADDR 0x47C0C4C8 -#define DDR_PHY_CMD_ADDR2 0x47C0C800 -#define DDR_PHY_DATA_ADDR2 0x47C0C8C8 -#define DDR_DATA_REGS_NR 4 - -#define DDRPHY_0_CONFIG_BASE (CTRL_BASE + 0x1400) -#define DDRPHY_CONFIG_BASE DDRPHY_0_CONFIG_BASE - -/* CPSW Config space */ -#define CPSW_MDIO_BASE 0x4A100800 - -/* RTC base address */ -#define RTC_BASE 0x480C0000 - -/* OTG */ -#define USB0_OTG_BASE 0x47401000 -#define USB1_OTG_BASE 0x47401800 - -#endif /* __AM33XX_HARDWARE_TI814X_H */ diff --git a/arch/arm/include/asm/arch-am33xx/mmc_host_def.h b/arch/arm/include/asm/arch-am33xx/mmc_host_def.h index 5a2ea8faefdc..ed15d15c5b30 100644 --- a/arch/arm/include/asm/arch-am33xx/mmc_host_def.h +++ b/arch/arm/include/asm/arch-am33xx/mmc_host_def.h @@ -24,10 +24,7 @@ #define OMAP_HSMMC1_BASE 0x48060000 #define OMAP_HSMMC2_BASE 0x481D8000
-#if defined(CONFIG_TI814X) -#undef MMC_CLOCK_REFERENCE -#define MMC_CLOCK_REFERENCE 192 /* MHz */ -#elif defined(CONFIG_TI816X) +#if defined(CONFIG_TI816X) #undef MMC_CLOCK_REFERENCE #define MMC_CLOCK_REFERENCE 48 /* MHz */ #endif diff --git a/arch/arm/include/asm/arch-am33xx/mux.h b/arch/arm/include/asm/arch-am33xx/mux.h index b16b18473361..7cf973710d15 100644 --- a/arch/arm/include/asm/arch-am33xx/mux.h +++ b/arch/arm/include/asm/arch-am33xx/mux.h @@ -20,8 +20,6 @@
#ifdef CONFIG_AM33XX #include <asm/arch/mux_am33xx.h> -#elif defined(CONFIG_TI814X) -#include <asm/arch/mux_ti814x.h> #elif defined(CONFIG_TI816X) #include <asm/arch/mux_ti816x.h> #elif defined(CONFIG_AM43XX) diff --git a/arch/arm/include/asm/arch-am33xx/mux_ti814x.h b/arch/arm/include/asm/arch-am33xx/mux_ti814x.h deleted file mode 100644 index a26e5038f710..000000000000 --- a/arch/arm/include/asm/arch-am33xx/mux_ti814x.h +++ /dev/null @@ -1,311 +0,0 @@ -/* - * mux_ti814x.h - * - * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation version 2. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any - * kind, whether express or implied; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef _MUX_TI814X_H_ -#define _MUX_TI814X_H_ - -/* PAD Control Fields */ -#define PINCNTL_RSV_MSK (0x3 << 18) /* Reserved bitmask */ -#define PULLUP_EN (0x1 << 17) /* Pull UP Selection */ -#define PULLUDEN (0x0 << 16) /* Pull up enabled */ -#define PULLUDDIS (0x1 << 16) /* Pull up disabled */ -#define MODE(val) val /* used for Readability */ - -#define MUX_CFG(value, offset) \ -{ \ - int tmp; \ - tmp = __raw_readl(CTRL_BASE + offset); \ - tmp &= PINCNTL_RSV_MSK; \ - __raw_writel(tmp | value, (CTRL_BASE + offset));\ -} - -/* - * PAD CONTROL OFFSETS - * Field names corresponds to the pad signal name - */ -struct pad_signals { - int pincntl1; - int pincntl2; - int pincntl3; - int pincntl4; - int pincntl5; - int pincntl6; - int pincntl7; - int pincntl8; - int pincntl9; - int pincntl10; - int pincntl11; - int pincntl12; - int pincntl13; - int pincntl14; - int pincntl15; - int pincntl16; - int pincntl17; - int pincntl18; - int pincntl19; - int pincntl20; - int pincntl21; - int pincntl22; - int pincntl23; - int pincntl24; - int pincntl25; - int pincntl26; - int pincntl27; - int pincntl28; - int pincntl29; - int pincntl30; - int pincntl31; - int pincntl32; - int pincntl33; - int pincntl34; - int pincntl35; - int pincntl36; - int pincntl37; - int pincntl38; - int pincntl39; - int pincntl40; - int pincntl41; - int pincntl42; - int pincntl43; - int pincntl44; - int pincntl45; - int pincntl46; - int pincntl47; - int pincntl48; - int pincntl49; - int pincntl50; - int pincntl51; - int pincntl52; - int pincntl53; - int pincntl54; - int pincntl55; - int pincntl56; - int pincntl57; - int pincntl58; - int pincntl59; - int pincntl60; - int pincntl61; - int pincntl62; - int pincntl63; - int pincntl64; - int pincntl65; - int pincntl66; - int pincntl67; - int pincntl68; - int pincntl69; - int pincntl70; - int pincntl71; - int pincntl72; - int pincntl73; - int pincntl74; - int pincntl75; - int pincntl76; - int pincntl77; - int pincntl78; - int pincntl79; - int pincntl80; - int pincntl81; - int pincntl82; - int pincntl83; - int pincntl84; - int pincntl85; - int pincntl86; - int pincntl87; - int pincntl88; - int pincntl89; - int pincntl90; - int pincntl91; - int pincntl92; - int pincntl93; - int pincntl94; - int pincntl95; - int pincntl96; - int pincntl97; - int pincntl98; - int pincntl99; - int pincntl100; - int pincntl101; - int pincntl102; - int pincntl103; - int pincntl104; - int pincntl105; - int pincntl106; - int pincntl107; - int pincntl108; - int pincntl109; - int pincntl110; - int pincntl111; - int pincntl112; - int pincntl113; - int pincntl114; - int pincntl115; - int pincntl116; - int pincntl117; - int pincntl118; - int pincntl119; - int pincntl120; - int pincntl121; - int pincntl122; - int pincntl123; - int pincntl124; - int pincntl125; - int pincntl126; - int pincntl127; - int pincntl128; - int pincntl129; - int pincntl130; - int pincntl131; - int pincntl132; - int pincntl133; - int pincntl134; - int pincntl135; - int pincntl136; - int pincntl137; - int pincntl138; - int pincntl139; - int pincntl140; - int pincntl141; - int pincntl142; - int pincntl143; - int pincntl144; - int pincntl145; - int pincntl146; - int pincntl147; - int pincntl148; - int pincntl149; - int pincntl150; - int pincntl151; - int pincntl152; - int pincntl153; - int pincntl154; - int pincntl155; - int pincntl156; - int pincntl157; - int pincntl158; - int pincntl159; - int pincntl160; - int pincntl161; - int pincntl162; - int pincntl163; - int pincntl164; - int pincntl165; - int pincntl166; - int pincntl167; - int pincntl168; - int pincntl169; - int pincntl170; - int pincntl171; - int pincntl172; - int pincntl173; - int pincntl174; - int pincntl175; - int pincntl176; - int pincntl177; - int pincntl178; - int pincntl179; - int pincntl180; - int pincntl181; - int pincntl182; - int pincntl183; - int pincntl184; - int pincntl185; - int pincntl186; - int pincntl187; - int pincntl188; - int pincntl189; - int pincntl190; - int pincntl191; - int pincntl192; - int pincntl193; - int pincntl194; - int pincntl195; - int pincntl196; - int pincntl197; - int pincntl198; - int pincntl199; - int pincntl200; - int pincntl201; - int pincntl202; - int pincntl203; - int pincntl204; - int pincntl205; - int pincntl206; - int pincntl207; - int pincntl208; - int pincntl209; - int pincntl210; - int pincntl211; - int pincntl212; - int pincntl213; - int pincntl214; - int pincntl215; - int pincntl216; - int pincntl217; - int pincntl218; - int pincntl219; - int pincntl220; - int pincntl221; - int pincntl222; - int pincntl223; - int pincntl224; - int pincntl225; - int pincntl226; - int pincntl227; - int pincntl228; - int pincntl229; - int pincntl230; - int pincntl231; - int pincntl232; - int pincntl233; - int pincntl234; - int pincntl235; - int pincntl236; - int pincntl237; - int pincntl238; - int pincntl239; - int pincntl240; - int pincntl241; - int pincntl242; - int pincntl243; - int pincntl244; - int pincntl245; - int pincntl246; - int pincntl247; - int pincntl248; - int pincntl249; - int pincntl250; - int pincntl251; - int pincntl252; - int pincntl253; - int pincntl254; - int pincntl255; - int pincntl256; - int pincntl257; - int pincntl258; - int pincntl259; - int pincntl260; - int pincntl261; - int pincntl262; - int pincntl263; - int pincntl264; - int pincntl265; - int pincntl266; - int pincntl267; - int pincntl268; - int pincntl269; - int pincntl270; -}; - -#endif /* endif _MUX_TI814X_H_ */ diff --git a/arch/arm/include/asm/arch-am33xx/omap.h b/arch/arm/include/asm/arch-am33xx/omap.h index bc9f0a1146a0..4c71dbf3ab60 100644 --- a/arch/arm/include/asm/arch-am33xx/omap.h +++ b/arch/arm/include/asm/arch-am33xx/omap.h @@ -20,7 +20,7 @@ #define NON_SECURE_SRAM_START 0x402F0400 #define NON_SECURE_SRAM_END 0x40310000 #define NON_SECURE_SRAM_IMG_END 0x4030B800 -#elif defined(CONFIG_TI816X) || defined(CONFIG_TI814X) +#elif defined(CONFIG_TI816X) #define NON_SECURE_SRAM_START 0x40300000 #define NON_SECURE_SRAM_END 0x40320000 #define NON_SECURE_SRAM_IMG_END 0x4031B800 diff --git a/arch/arm/include/asm/arch-am33xx/spl.h b/arch/arm/include/asm/arch-am33xx/spl.h index f3910c2123a0..6bd3ca0d076a 100644 --- a/arch/arm/include/asm/arch-am33xx/spl.h +++ b/arch/arm/include/asm/arch-am33xx/spl.h @@ -9,21 +9,7 @@ #define BOOT_DEVICE_NONE 0x00 #define BOOT_DEVICE_MMC2_2 0xFF
-#if defined(CONFIG_TI814X) -#define BOOT_DEVICE_XIP 0x01 -#define BOOT_DEVICE_XIPWAIT 0x02 -#define BOOT_DEVICE_NAND 0x05 -#define BOOT_DEVICE_NAND_I2C 0x06 -#define BOOT_DEVICE_MMC2 0x08 /* ROM only supports 2nd instance. */ -#define BOOT_DEVICE_MMC1 0x09 -#define BOOT_DEVICE_SPI 0x15 -#define BOOT_DEVICE_UART 0x41 -#define BOOT_DEVICE_USBETH 0x44 -#define BOOT_DEVICE_CPGMAC 0x46 - -#define MMC_BOOT_DEVICES_START BOOT_DEVICE_MMC2 -#define MMC_BOOT_DEVICES_END BOOT_DEVICE_MMC1 -#elif defined(CONFIG_TI816X) +#if defined(CONFIG_TI816X) #define BOOT_DEVICE_XIP 0x01 #define BOOT_DEVICE_XIPWAIT 0x02 #define BOOT_DEVICE_NAND 0x03 diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 3bf972052260..1db71df27212 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -75,14 +75,6 @@ config OMAP54XX imply SPL_SERIAL imply SYS_I2C_OMAP24XX
-config TI814X - bool "TI814X SoC" - select SPECIFY_CONSOLE_INDEX - help - Support for AM335x SOC from Texas Instruments. - The AM335x high performance SOC features a Cortex-A8 - ARM core and more. - config TI816X bool "TI816X SoC" select SPECIFY_CONSOLE_INDEX diff --git a/arch/arm/mach-omap2/am33xx/Kconfig b/arch/arm/mach-omap2/am33xx/Kconfig index b666e8111040..1299aec055ec 100644 --- a/arch/arm/mach-omap2/am33xx/Kconfig +++ b/arch/arm/mach-omap2/am33xx/Kconfig @@ -8,16 +8,6 @@ config TARGET_TI816X_EVM
endif
-if TI814X - -config TARGET_TI814X_EVM - bool "Support ti814x_evm" - help - This option specifies support for the TI8148 - EVM development platform. - -endif - if AM33XX
config AM33XX_CHILISOM diff --git a/arch/arm/mach-omap2/am33xx/Makefile b/arch/arm/mach-omap2/am33xx/Makefile index 4e4f98ea9037..bf94d345dae5 100644 --- a/arch/arm/mach-omap2/am33xx/Makefile +++ b/arch/arm/mach-omap2/am33xx/Makefile @@ -3,7 +3,6 @@ # Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
obj-$(CONFIG_AM33XX) += clock_am33xx.o -obj-$(CONFIG_TI814X) += clock_ti814x.o obj-$(CONFIG_AM43XX) += clock_am43xx.o
ifneq ($(CONFIG_AM43XX)$(CONFIG_AM33XX),) diff --git a/arch/arm/mach-omap2/am33xx/clock_ti814x.c b/arch/arm/mach-omap2/am33xx/clock_ti814x.c deleted file mode 100644 index 27abaff48fce..000000000000 --- a/arch/arm/mach-omap2/am33xx/clock_ti814x.c +++ /dev/null @@ -1,410 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * clock_ti814x.c - * - * Clocks for TI814X based boards - * - * Copyright (C) 2013, Texas Instruments, Incorporated - */ - -#include <common.h> -#include <asm/arch/cpu.h> -#include <asm/arch/clock.h> -#include <asm/arch/hardware.h> -#include <asm/io.h> -#include <linux/delay.h> - -/* PRCM */ -#define PRCM_MOD_EN 0x2 - -/* CLK_SRC */ -#define OSC_SRC0 0 -#define OSC_SRC1 1 - -#define L3_OSC_SRC OSC_SRC0 - -#define OSC_0_FREQ 20 - -#define DCO_HS2_MIN 500 -#define DCO_HS2_MAX 1000 -#define DCO_HS1_MIN 1000 -#define DCO_HS1_MAX 2000 - -#define SELFREQDCO_HS2 0x00000801 -#define SELFREQDCO_HS1 0x00001001 - -#define MPU_N 0x1 -#define MPU_M 0x3C -#define MPU_M2 1 -#define MPU_CLKCTRL 0x1 - -#define L3_N 19 -#define L3_M 880 -#define L3_M2 4 -#define L3_CLKCTRL 0x801 - -#define DDR_N 19 -#define DDR_M 666 -#define DDR_M2 2 -#define DDR_CLKCTRL 0x801 - -/* ADPLLJ register values */ -#define ADPLLJ_CLKCTRL_HS2 0x00000801 /* HS2 mode, TINT2 = 1 */ -#define ADPLLJ_CLKCTRL_HS1 0x00001001 /* HS1 mode, TINT2 = 1 */ -#define ADPLLJ_CLKCTRL_CLKDCOLDOEN (1 << 29) -#define ADPLLJ_CLKCTRL_IDLE (1 << 23) -#define ADPLLJ_CLKCTRL_CLKOUTEN (1 << 20) -#define ADPLLJ_CLKCTRL_CLKOUTLDOEN (1 << 19) -#define ADPLLJ_CLKCTRL_CLKDCOLDOPWDNZ (1 << 17) -#define ADPLLJ_CLKCTRL_LPMODE (1 << 12) -#define ADPLLJ_CLKCTRL_DRIFTGUARDIAN (1 << 11) -#define ADPLLJ_CLKCTRL_REGM4XEN (1 << 10) -#define ADPLLJ_CLKCTRL_TINITZ (1 << 0) -#define ADPLLJ_CLKCTRL_CLKDCO (ADPLLJ_CLKCTRL_CLKDCOLDOEN | \ - ADPLLJ_CLKCTRL_CLKOUTEN | \ - ADPLLJ_CLKCTRL_CLKOUTLDOEN | \ - ADPLLJ_CLKCTRL_CLKDCOLDOPWDNZ) - -#define ADPLLJ_STATUS_PHASELOCK (1 << 10) -#define ADPLLJ_STATUS_FREQLOCK (1 << 9) -#define ADPLLJ_STATUS_PHSFRQLOCK (ADPLLJ_STATUS_PHASELOCK | \ - ADPLLJ_STATUS_FREQLOCK) -#define ADPLLJ_STATUS_BYPASSACK (1 << 8) -#define ADPLLJ_STATUS_BYPASS (1 << 0) -#define ADPLLJ_STATUS_BYPASSANDACK (ADPLLJ_STATUS_BYPASSACK | \ - ADPLLJ_STATUS_BYPASS) - -#define ADPLLJ_TENABLE_ENB (1 << 0) -#define ADPLLJ_TENABLEDIV_ENB (1 << 0) - -#define ADPLLJ_M2NDIV_M2SHIFT 16 - -#define MPU_PLL_BASE (PLL_SUBSYS_BASE + 0x048) -#define L3_PLL_BASE (PLL_SUBSYS_BASE + 0x110) -#define DDR_PLL_BASE (PLL_SUBSYS_BASE + 0x290) - -struct ad_pll { - unsigned int pwrctrl; - unsigned int clkctrl; - unsigned int tenable; - unsigned int tenablediv; - unsigned int m2ndiv; - unsigned int mn2div; - unsigned int fracdiv; - unsigned int bwctrl; - unsigned int fracctrl; - unsigned int status; - unsigned int m3div; - unsigned int rampctrl; -}; - -#define OSC_SRC_CTRL (PLL_SUBSYS_BASE + 0x2C0) - -#define ENET_CLKCTRL_CMPL 0x30000 - -#define SATA_PLL_BASE (CTRL_BASE + 0x0720) - -struct sata_pll { - unsigned int pllcfg0; - unsigned int pllcfg1; - unsigned int pllcfg2; - unsigned int pllcfg3; - unsigned int pllcfg4; - unsigned int pllstatus; - unsigned int rxstatus; - unsigned int txstatus; - unsigned int testcfg; -}; - -#define SEL_IN_FREQ (0x1 << 31) -#define DIGCLRZ (0x1 << 30) -#define ENDIGLDO (0x1 << 4) -#define APLL_CP_CURR (0x1 << 3) -#define ENBGSC_REF (0x1 << 2) -#define ENPLLLDO (0x1 << 1) -#define ENPLL (0x1 << 0) - -#define SATA_PLLCFG0_1 (SEL_IN_FREQ | ENBGSC_REF) -#define SATA_PLLCFG0_2 (SEL_IN_FREQ | ENDIGLDO | ENBGSC_REF) -#define SATA_PLLCFG0_3 (SEL_IN_FREQ | ENDIGLDO | ENBGSC_REF | ENPLLLDO) -#define SATA_PLLCFG0_4 (SEL_IN_FREQ | DIGCLRZ | ENDIGLDO | ENBGSC_REF | \ - ENPLLLDO | ENPLL) - -#define PLL_LOCK (0x1 << 0) - -#define ENSATAMODE (0x1 << 31) -#define PLLREFSEL (0x1 << 30) -#define MDIVINT (0x4b << 18) -#define EN_CLKAUX (0x1 << 5) -#define EN_CLK125M (0x1 << 4) -#define EN_CLK100M (0x1 << 3) -#define EN_CLK50M (0x1 << 2) - -#define SATA_PLLCFG1 (ENSATAMODE | \ - PLLREFSEL | \ - MDIVINT | \ - EN_CLKAUX | \ - EN_CLK125M | \ - EN_CLK100M | \ - EN_CLK50M) - -#define DIGLDO_EN_CAPLESSMODE (0x1 << 22) -#define PLLDO_EN_LDO_STABLE (0x1 << 11) -#define PLLDO_EN_BUF_CUR (0x1 << 7) -#define PLLDO_EN_LP (0x1 << 6) -#define PLLDO_CTRL_TRIM_1_4V (0x10 << 1) - -#define SATA_PLLCFG3 (DIGLDO_EN_CAPLESSMODE | \ - PLLDO_EN_LDO_STABLE | \ - PLLDO_EN_BUF_CUR | \ - PLLDO_EN_LP | \ - PLLDO_CTRL_TRIM_1_4V) - -const struct cm_alwon *cmalwon = (struct cm_alwon *)CM_ALWON_BASE; -const struct cm_def *cmdef = (struct cm_def *)CM_DEFAULT_BASE; -const struct sata_pll *spll = (struct sata_pll *)SATA_PLL_BASE; - -/* - * Enable the peripheral clock for required peripherals - */ -static void enable_per_clocks(void) -{ - /* HSMMC1 */ - writel(PRCM_MOD_EN, &cmalwon->mmchs1clkctrl); - while (readl(&cmalwon->mmchs1clkctrl) != PRCM_MOD_EN) - ; - - /* Ethernet */ - writel(PRCM_MOD_EN, &cmalwon->ethclkstctrl); - writel(PRCM_MOD_EN, &cmalwon->ethernet0clkctrl); - while ((readl(&cmalwon->ethernet0clkctrl) & ENET_CLKCTRL_CMPL) != 0) - ; - writel(PRCM_MOD_EN, &cmalwon->ethernet1clkctrl); - while ((readl(&cmalwon->ethernet1clkctrl) & ENET_CLKCTRL_CMPL) != 0) - ; - - /* RTC clocks */ - writel(PRCM_MOD_EN, &cmalwon->rtcclkstctrl); - writel(PRCM_MOD_EN, &cmalwon->rtcclkctrl); - while (readl(&cmalwon->rtcclkctrl) != PRCM_MOD_EN) - ; -} - -/* - * select the HS1 or HS2 for DCO Freq - * return : CLKCTRL - */ -static u32 pll_dco_freq_sel(u32 clkout_dco) -{ - if (clkout_dco >= DCO_HS2_MIN && clkout_dco < DCO_HS2_MAX) - return SELFREQDCO_HS2; - else if (clkout_dco >= DCO_HS1_MIN && clkout_dco < DCO_HS1_MAX) - return SELFREQDCO_HS1; - else - return -1; -} - -/* - * select the sigma delta config - * return: sigma delta val - */ -static u32 pll_sigma_delta_val(u32 clkout_dco) -{ - u32 sig_val = 0; - - sig_val = (clkout_dco + 225) / 250; - sig_val = sig_val << 24; - - return sig_val; -} - -/* - * configure individual ADPLLJ - */ -static void pll_config(u32 base, u32 n, u32 m, u32 m2, - u32 clkctrl_val, int adpllj) -{ - const struct ad_pll *adpll = (struct ad_pll *)base; - u32 m2nval, mn2val, read_clkctrl = 0, clkout_dco = 0; - u32 sig_val = 0, hs_mod = 0; - - m2nval = (m2 << ADPLLJ_M2NDIV_M2SHIFT) | n; - mn2val = m; - - /* calculate clkout_dco */ - clkout_dco = ((OSC_0_FREQ / (n+1)) * m); - - /* sigma delta & Hs mode selection skip for ADPLLS*/ - if (adpllj) { - sig_val = pll_sigma_delta_val(clkout_dco); - hs_mod = pll_dco_freq_sel(clkout_dco); - } - - /* by-pass pll */ - read_clkctrl = readl(&adpll->clkctrl); - writel((read_clkctrl | ADPLLJ_CLKCTRL_IDLE), &adpll->clkctrl); - while ((readl(&adpll->status) & ADPLLJ_STATUS_BYPASSANDACK) - != ADPLLJ_STATUS_BYPASSANDACK) - ; - - /* clear TINITZ */ - read_clkctrl = readl(&adpll->clkctrl); - writel((read_clkctrl & ~ADPLLJ_CLKCTRL_TINITZ), &adpll->clkctrl); - - /* - * ref_clk = 20/(n + 1); - * clkout_dco = ref_clk * m; - * clk_out = clkout_dco/m2; - */ - read_clkctrl = readl(&adpll->clkctrl) & - ~(ADPLLJ_CLKCTRL_LPMODE | - ADPLLJ_CLKCTRL_DRIFTGUARDIAN | - ADPLLJ_CLKCTRL_REGM4XEN); - writel(m2nval, &adpll->m2ndiv); - writel(mn2val, &adpll->mn2div); - - /* Skip for modena(ADPLLS) */ - if (adpllj) { - writel(sig_val, &adpll->fracdiv); - writel((read_clkctrl | hs_mod), &adpll->clkctrl); - } - - /* Load M2, N2 dividers of ADPLL */ - writel(ADPLLJ_TENABLEDIV_ENB, &adpll->tenablediv); - writel(~ADPLLJ_TENABLEDIV_ENB, &adpll->tenablediv); - - /* Load M, N dividers of ADPLL */ - writel(ADPLLJ_TENABLE_ENB, &adpll->tenable); - writel(~ADPLLJ_TENABLE_ENB, &adpll->tenable); - - /* Configure CLKDCOLDOEN,CLKOUTLDOEN,CLKOUT Enable BITS */ - read_clkctrl = readl(&adpll->clkctrl) & ~ADPLLJ_CLKCTRL_CLKDCO; - if (adpllj) - writel((read_clkctrl | ADPLLJ_CLKCTRL_CLKDCO), - &adpll->clkctrl); - - /* Enable TINTZ and disable IDLE(PLL in Active & Locked Mode */ - read_clkctrl = readl(&adpll->clkctrl) & ~ADPLLJ_CLKCTRL_IDLE; - writel((read_clkctrl | ADPLLJ_CLKCTRL_TINITZ), &adpll->clkctrl); - - /* Wait for phase and freq lock */ - while ((readl(&adpll->status) & ADPLLJ_STATUS_PHSFRQLOCK) != - ADPLLJ_STATUS_PHSFRQLOCK) - ; -} - -static void unlock_pll_control_mmr(void) -{ - /* TRM 2.10.1.4 and 3.2.7-3.2.11 */ - writel(0x1EDA4C3D, 0x481C5040); - writel(0x2FF1AC2B, 0x48140060); - writel(0xF757FDC0, 0x48140064); - writel(0xE2BC3A6D, 0x48140068); - writel(0x1EBF131D, 0x4814006c); - writel(0x6F361E05, 0x48140070); -} - -static void mpu_pll_config(void) -{ - pll_config(MPU_PLL_BASE, MPU_N, MPU_M, MPU_M2, MPU_CLKCTRL, 0); -} - -static void l3_pll_config(void) -{ - u32 l3_osc_src, rd_osc_src = 0; - - l3_osc_src = L3_OSC_SRC; - rd_osc_src = readl(OSC_SRC_CTRL); - - if (OSC_SRC0 == l3_osc_src) - writel((rd_osc_src & 0xfffffffe)|0x0, OSC_SRC_CTRL); - else - writel((rd_osc_src & 0xfffffffe)|0x1, OSC_SRC_CTRL); - - pll_config(L3_PLL_BASE, L3_N, L3_M, L3_M2, L3_CLKCTRL, 1); -} - -void ddr_pll_config(unsigned int ddrpll_m) -{ - pll_config(DDR_PLL_BASE, DDR_N, DDR_M, DDR_M2, DDR_CLKCTRL, 1); -} - -void sata_pll_config(void) -{ - /* - * This sequence for configuring the SATA PLL - * resident in the control module is documented - * in TI8148 TRM section 21.3.1 - */ - writel(SATA_PLLCFG1, &spll->pllcfg1); - udelay(50); - - writel(SATA_PLLCFG3, &spll->pllcfg3); - udelay(50); - - writel(SATA_PLLCFG0_1, &spll->pllcfg0); - udelay(50); - - writel(SATA_PLLCFG0_2, &spll->pllcfg0); - udelay(50); - - writel(SATA_PLLCFG0_3, &spll->pllcfg0); - udelay(50); - - writel(SATA_PLLCFG0_4, &spll->pllcfg0); - udelay(50); - - while (((readl(&spll->pllstatus) & PLL_LOCK) == 0)) - ; -} - -void enable_dmm_clocks(void) -{ - writel(PRCM_MOD_EN, &cmdef->fwclkctrl); - writel(PRCM_MOD_EN, &cmdef->l3fastclkstctrl); - writel(PRCM_MOD_EN, &cmdef->emif0clkctrl); - while ((readl(&cmdef->emif0clkctrl)) != PRCM_MOD_EN) - ; - writel(PRCM_MOD_EN, &cmdef->emif1clkctrl); - while ((readl(&cmdef->emif1clkctrl)) != PRCM_MOD_EN) - ; - while ((readl(&cmdef->l3fastclkstctrl) & 0x300) != 0x300) - ; - writel(PRCM_MOD_EN, &cmdef->dmmclkctrl); - while ((readl(&cmdef->dmmclkctrl)) != PRCM_MOD_EN) - ; - writel(PRCM_MOD_EN, &cmalwon->l3slowclkstctrl); - while ((readl(&cmalwon->l3slowclkstctrl) & 0x2100) != 0x2100) - ; -} - -void setup_clocks_for_console(void) -{ - unlock_pll_control_mmr(); - /* UART0 */ - writel(PRCM_MOD_EN, &cmalwon->uart0clkctrl); - while (readl(&cmalwon->uart0clkctrl) != PRCM_MOD_EN) - ; -} - -void setup_early_clocks(void) -{ - setup_clocks_for_console(); -} - -/* - * Configure the PLL/PRCM for necessary peripherals - */ -void prcm_init(void) -{ - /* Enable the control module */ - writel(PRCM_MOD_EN, &cmalwon->controlclkctrl); - - /* Configure PLLs */ - mpu_pll_config(); - l3_pll_config(); - sata_pll_config(); - - /* Enable the required peripherals */ - enable_per_clocks(); -} diff --git a/arch/arm/mach-omap2/am33xx/emif4.c b/arch/arm/mach-omap2/am33xx/emif4.c index a5fdb0433dc7..bf3da43ed982 100644 --- a/arch/arm/mach-omap2/am33xx/emif4.c +++ b/arch/arm/mach-omap2/am33xx/emif4.c @@ -28,26 +28,6 @@ static struct cm_device_inst *cm_device = (struct cm_device_inst *)CM_DEVICE_INST; #endif
-#ifdef CONFIG_TI814X -void config_dmm(const struct dmm_lisa_map_regs *regs) -{ - struct dmm_lisa_map_regs *hw_lisa_map_regs = - (struct dmm_lisa_map_regs *)DMM_BASE; - - enable_dmm_clocks(); - - writel(0, &hw_lisa_map_regs->dmm_lisa_map_3); - writel(0, &hw_lisa_map_regs->dmm_lisa_map_2); - writel(0, &hw_lisa_map_regs->dmm_lisa_map_1); - writel(0, &hw_lisa_map_regs->dmm_lisa_map_0); - - writel(regs->dmm_lisa_map_3, &hw_lisa_map_regs->dmm_lisa_map_3); - writel(regs->dmm_lisa_map_2, &hw_lisa_map_regs->dmm_lisa_map_2); - writel(regs->dmm_lisa_map_1, &hw_lisa_map_regs->dmm_lisa_map_1); - writel(regs->dmm_lisa_map_0, &hw_lisa_map_regs->dmm_lisa_map_0); -} -#endif - static void config_vtp(int nr) { writel(readl(&vtpreg[nr]->vtp0ctrlreg) | VTP_CTRL_ENABLE, diff --git a/arch/arm/mach-omap2/boot-common.c b/arch/arm/mach-omap2/boot-common.c index c463c96c74c8..408159fde810 100644 --- a/arch/arm/mach-omap2/boot-common.c +++ b/arch/arm/mach-omap2/boot-common.c @@ -181,7 +181,7 @@ void save_omap_boot_params(void)
gd->arch.omap_boot_mode = boot_mode;
-#if !defined(CONFIG_TI814X) && !defined(CONFIG_TI816X) && \ +#if !defined(CONFIG_TI816X) && \ !defined(CONFIG_AM33XX) && !defined(CONFIG_AM43XX)
/* CH flags */ diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig index 08b6c7bdcc42..76e19918aadc 100644 --- a/drivers/i2c/Kconfig +++ b/drivers/i2c/Kconfig @@ -704,7 +704,7 @@ config SYS_I2C_BUS_MAX depends on ARCH_OMAP2PLUS || ARCH_SOCFPGA default 2 if TI816X default 3 if OMAP34XX || AM33XX || AM43XX - default 4 if ARCH_SOCFPGA || OMAP44XX || TI814X + default 4 if ARCH_SOCFPGA || OMAP44XX default 5 if OMAP54XX help Define the maximum number of available I2C buses. diff --git a/drivers/net/ti/cpsw.c b/drivers/net/ti/cpsw.c index a19dc38e5251..3a8cc9c52a51 100644 --- a/drivers/net/ti/cpsw.c +++ b/drivers/net/ti/cpsw.c @@ -79,10 +79,6 @@ struct cpsw_slave_regs { u32 tx_pri_map; #ifdef CONFIG_AM33XX u32 gap_thresh; -#elif defined(CONFIG_TI814X) - u32 ts_ctl; - u32 ts_seq_ltype; - u32 ts_vlan; #endif u32 sa_lo; u32 sa_hi; diff --git a/include/configs/ti814x_evm.h b/include/configs/ti814x_evm.h deleted file mode 100644 index 03849adb5abe..000000000000 --- a/include/configs/ti814x_evm.h +++ /dev/null @@ -1,102 +0,0 @@ -/* - * ti814x_evm.h - * - * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation version 2. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any - * kind, whether express or implied; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __CONFIG_TI814X_EVM_H -#define __CONFIG_TI814X_EVM_H - -#include <asm/arch/omap.h> - -/* commands to include */ - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "loadaddr=0x80200000\0" \ - "fdtaddr=0x80F80000\0" \ - "rdaddr=0x81000000\0" \ - "bootfile=/boot/uImage\0" \ - "fdtfile=\0" \ - "console=ttyO0,115200n8\0" \ - "optargs=\0" \ - "mmcdev=0\0" \ - "mmcroot=/dev/mmcblk0p2 ro\0" \ - "mmcrootfstype=ext4 rootwait\0" \ - "ramroot=/dev/ram0 rw ramdisk_size=65536 initrd=${rdaddr},64M\0" \ - "ramrootfstype=ext2\0" \ - "mmcargs=setenv bootargs console=${console} " \ - "${optargs} " \ - "root=${mmcroot} " \ - "rootfstype=${mmcrootfstype}\0" \ - "bootenv=uEnv.txt\0" \ - "loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \ - "importbootenv=echo Importing environment from mmc ...; " \ - "env import -t $loadaddr $filesize\0" \ - "ramargs=setenv bootargs console=${console} " \ - "${optargs} " \ - "root=${ramroot} " \ - "rootfstype=${ramrootfstype}\0" \ - "loadramdisk=fatload mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \ - "loaduimagefat=fatload mmc ${mmcdev} ${loadaddr} ${bootfile}\0" \ - "loaduimage=ext2load mmc ${mmcdev}:2 ${loadaddr} ${bootfile}\0" \ - "mmcboot=echo Booting from mmc ...; " \ - "run mmcargs; " \ - "bootm ${loadaddr}\0" \ - "ramboot=echo Booting from ramdisk ...; " \ - "run ramargs; " \ - "bootm ${loadaddr}\0" \ - "fdtfile=ti814x-evm.dtb\0" \ - -/* Clock Defines */ -#define V_OSCK 24000000 /* Clock output from T2 */ -#define V_SCLK (V_OSCK >> 1) - - -/* Console I/O Buffer Size */ - -/** - * Physical Memory Map - */ -#define PHYS_DRAM_1_SIZE 0x20000000 /* 512MB */ -#define CONFIG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1024MB */ - -#define CFG_SYS_SDRAM_BASE 0x80000000 - -/** - * Platform/Board specific defs - */ -#define CFG_SYS_TIMERBASE 0x4802E000 - -/* NS16550 Configuration */ -#define CFG_SYS_NS16550_CLK (48000000) -#define CFG_SYS_NS16550_COM1 0x48020000 /* Base EVM has UART0 */ - -/* CPU */ - -/* Defines for SPL */ - -/* - * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM - * 64 bytes before this address should be set aside for u-boot.img's - * header. That is 0x800FFFC0--0x80800000 should not be used for any - * other needs. - */ - -/* - * Since SPL did pll and ddr initialization for us, - * we don't need to do it twice. - */ - -/* Ethernet */ -#define CONFIG_PHY_ET1011C_TX_CLK_FIX - -#endif /* ! __CONFIG_TI814X_EVM_H */