TI armv7 based SoCs are based on two architectures - one based on OMAP generation architecture and others based on Keystone architecture.
Many of the options are architecture specific, however a lot are common with v7 architecture. So, step 1 will be to move out OMAP specific stuff from ti_armv7_common into a ti_armv7_omap.h header which is then used by all the relevant architecture headers.
Signed-off-by: Nishanth Menon nm@ti.com --- V2: no change.
V1: https://patchwork.ozlabs.org/patch/496726/ include/configs/am43xx_evm.h | 2 +- include/configs/ti_am335x_common.h | 2 +- include/configs/ti_armv7_common.h | 21 ---------------- include/configs/ti_armv7_omap.h | 49 ++++++++++++++++++++++++++++++++++++++ include/configs/ti_omap3_common.h | 2 +- include/configs/ti_omap4_common.h | 2 +- include/configs/ti_omap5_common.h | 2 +- 7 files changed, 54 insertions(+), 26 deletions(-) create mode 100644 include/configs/ti_armv7_omap.h
diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h index 33e534a76583..65ac8ef34eb8 100644 --- a/include/configs/am43xx_evm.h +++ b/include/configs/am43xx_evm.h @@ -80,7 +80,7 @@ #endif
/* Now bring in the rest of the common code. */ -#include <configs/ti_armv7_common.h> +#include <configs/ti_armv7_omap.h>
/* Always 64 KiB env size */ #define CONFIG_ENV_SIZE (64 << 10) diff --git a/include/configs/ti_am335x_common.h b/include/configs/ti_am335x_common.h index 4d2ae280e7f1..9697431b4496 100644 --- a/include/configs/ti_am335x_common.h +++ b/include/configs/ti_am335x_common.h @@ -94,6 +94,6 @@ #endif
/* Now bring in the rest of the common code. */ -#include <configs/ti_armv7_common.h> +#include <configs/ti_armv7_omap.h>
#endif /* __CONFIG_TI_AM335X_COMMON_H__ */ diff --git a/include/configs/ti_armv7_common.h b/include/configs/ti_armv7_common.h index 0aea7d12ec16..63244dbc83ff 100644 --- a/include/configs/ti_armv7_common.h +++ b/include/configs/ti_armv7_common.h @@ -18,8 +18,6 @@ #define __CONFIG_TI_ARMV7_COMMON_H__
/* Common define for many platforms. */ -#define CONFIG_OMAP -#define CONFIG_OMAP_COMMON #define CONFIG_SYS_GENERIC_BOARD
/* @@ -86,39 +84,20 @@ #define CONFIG_I2C #define CONFIG_CMD_I2C #define CONFIG_SYS_I2C -#define CONFIG_SYS_OMAP24_I2C_SPEED 100000 -#define CONFIG_SYS_OMAP24_I2C_SLAVE 1 -#define CONFIG_SYS_I2C_OMAP24XX
/* MMC/SD IP block */ #define CONFIG_MMC #define CONFIG_GENERIC_MMC -#define CONFIG_OMAP_HSMMC #define CONFIG_CMD_MMC
/* McSPI IP block */ #define CONFIG_SPI -#define CONFIG_OMAP3_SPI #define CONFIG_CMD_SPI
/* GPIO block */ -#define CONFIG_OMAP_GPIO #define CONFIG_CMD_GPIO
/* - * GPMC NAND block. We support 1 device and the physical address to - * access CS0 at is 0x8000000. - */ -#ifdef CONFIG_NAND -#define CONFIG_NAND_OMAP_GPMC -#ifndef CONFIG_SYS_NAND_BASE -#define CONFIG_SYS_NAND_BASE 0x8000000 -#endif -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_CMD_NAND -#endif - -/* * The following are general good-enough settings for U-Boot. We set a * large malloc pool as we generally have a lot of DDR, and we opt for * function over binary size in the main portion of U-Boot as this is diff --git a/include/configs/ti_armv7_omap.h b/include/configs/ti_armv7_omap.h new file mode 100644 index 000000000000..7548170afcf7 --- /dev/null +++ b/include/configs/ti_armv7_omap.h @@ -0,0 +1,49 @@ +/* + * ti_armv7_omap.h + * + * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com/ + * + * SPDX-License-Identifier: GPL-2.0+ + * + * The various ARMv7 SoCs from TI all share a number of IP blocks when + * implementing a given feature. This is meant to isolate the features + * that are based on OMAP architecture. + */ +#ifndef __CONFIG_TI_ARMV7_OMAP_H__ +#define __CONFIG_TI_ARMV7_OMAP_H__ + +/* Common defines for all OMAP architecture based SoCs */ +#define CONFIG_OMAP +#define CONFIG_OMAP_COMMON + +/* I2C IP block */ +#define CONFIG_SYS_OMAP24_I2C_SPEED 100000 +#define CONFIG_SYS_OMAP24_I2C_SLAVE 1 +#define CONFIG_SYS_I2C_OMAP24XX + +/* MMC/SD IP block */ +#define CONFIG_OMAP_HSMMC + +/* SPI IP Block */ +#define CONFIG_OMAP3_SPI + +/* GPIO block */ +#define CONFIG_OMAP_GPIO + +/* + * GPMC NAND block. We support 1 device and the physical address to + * access CS0 at is 0x8000000. + */ +#ifdef CONFIG_NAND +#define CONFIG_NAND_OMAP_GPMC +#ifndef CONFIG_SYS_NAND_BASE +#define CONFIG_SYS_NAND_BASE 0x8000000 +#endif +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_CMD_NAND +#endif + +/* Now for the remaining common defines */ +#include <configs/ti_armv7_common.h> + +#endif /* __CONFIG_TI_ARMV7_OMAP_H__ */ diff --git a/include/configs/ti_omap3_common.h b/include/configs/ti_omap3_common.h index 429b109afa23..be231a551361 100644 --- a/include/configs/ti_omap3_common.h +++ b/include/configs/ti_omap3_common.h @@ -84,6 +84,6 @@ #endif
/* Now bring in the rest of the common code. */ -#include <configs/ti_armv7_common.h> +#include <configs/ti_armv7_omap.h>
#endif /* __CONFIG_TI_OMAP3_COMMON_H__ */ diff --git a/include/configs/ti_omap4_common.h b/include/configs/ti_omap4_common.h index e96613406b3b..959f312edb5b 100644 --- a/include/configs/ti_omap4_common.h +++ b/include/configs/ti_omap4_common.h @@ -52,7 +52,7 @@ #define CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS #endif
-#include <configs/ti_armv7_common.h> +#include <configs/ti_armv7_omap.h>
/* * Hardware drivers diff --git a/include/configs/ti_omap5_common.h b/include/configs/ti_omap5_common.h index f3e5a7587de9..789542be6710 100644 --- a/include/configs/ti_omap5_common.h +++ b/include/configs/ti_omap5_common.h @@ -47,7 +47,7 @@ #include <asm/arch/cpu.h> #include <asm/arch/omap.h>
-#include <configs/ti_armv7_common.h> +#include <configs/ti_armv7_omap.h>
/* * Hardware drivers