Hello Tom,
The following changes since commit fbf87b1823dd5ebc2a384711ea2c677543019ece:
arm: optimize relocate_code routine (2013-06-21 23:05:50 +0200)
are available in the git repository at:
git://git.denx.de/u-boot-arm master
for you to fetch changes up to 630aacb0859c6e26b2b0311d8e245da5e5b8ac67:
Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master' (2013-07-10 20:40:47 +0200)
----------------------------------------------------------------
Ajay Kumar (1): video: exynos_fb: Add the missing #else clause
Albert ARIBAUD (2): Merge branch 'u-boot-imx/master' into 'u-boot-arm/master' Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master'
Amar (2): EXYNOS5: I2C: Add FDT and non-FDT support for I2C EXYNOS: Resolve the i2c compilation error
Axel Lin (3): gpio: s3c2440_gpio: Fix wrong writel arguments gpio: s5p_gpio: Call s5p_gpio_set_value() instead of open-code ARM: OMAP: GPIO: Fix valid range and enable usage of all GPIOs on OMAP5
Bernie Thompson (1): exynos: Adjust the starting MIF voltage to 1.05v
Dirk Behme (2): spi: mxc_spi: Fix pre and post divider calculation spi: mxc_spi: Update pre and post divider algorithm
Eric Nelson (1): dwc_ahsata: Allow use with dcache enabled
Fabio Estevam (8): README: mx28_common: Keep the text within 80 columns README: mx28_common: Do not hardcode the SSP port README: mx28_common: Fix structure of sentence README: mxs: Introduce README.mxs mx28evk: Move README file inside board directory m28evk: Move README file inside board directory MAINTAINERS: Add an entry to the mx6q wandboard variant video: mxsfb: Break the line in videomode message
Ilya Ledvich (1): am33xx: fix the ddr_cmdtctrl structure
Lokesh Vutla (1): ARM: OMAP4+: Fix MA detection during SDRAM_AUTO_DETECTION
Michael Trimarchi (1): usb: omap: ulpi: fix ulpi transceiver access
Mike Dunn (5): pxa: add support for palmtreo680 board pxa: palmtreo680 flash programming utility pxa: turn icache off in cpu_init_crit() pxa: use -mcpu=xscale compiler option pxa: fix memory coherency problem after relocation
Minkyu Kang (1): arm: exynos: fix clock calculation
Otavio Salvador (2): vf610twr: Add default environment in line with other Freescale boards vf610twr: Remove SoC name from U-Boot prompt
Pierre Aubert (3): imx6: fix GPR2 wrong definition imx: Complete the pin definitions for the i.MX6DL / i.MX6Solo imx: Add support for the SabreSD shipped with i.MX6DL
Rajeshwari Shinde (9): EXYNOS5: FDT: Add compatible strings for Serial EXYNOS5: FDT: Add serial device node values S5P: Serial: Add fdt support to driver CONFIG: EXYNOS5: Enable silent console SMDK5250: Remove reduntant code EXYNOS: Add API for power reset and exit wakeup EXYNOS: LDS file move to common EXYNOS4210: Configure GPIO for uart EXYNOS: Move files from board/samsung to arch/arm
Robert Winkler (4): imx: nitrogen6x: Enabled data cache imx: nitrogen6x: Enable bootz imx: nitrogen6x: Enable raw initrd imx: nitrogen6x: Enable filesystem generic commands
Simon Glass (1): exynos: Enable mmc for snow
Tapani Utriainen (1): Add support for Wandboard Quad
trem (2): mx27: add function enable_caches mx27: add i2c clock
Łukasz Majewski (2): arm:trats: Increase malloc pool size (for DFU ext4 transfers) power:bat:trats: Break battery charging with ctrl+C
CREDITS | 4 + MAINTAINERS | 7 +- arch/arm/cpu/arm926ejs/mx27/generic.c | 10 + arch/arm/cpu/armv7/exynos/Makefile | 17 +- arch/arm/cpu/armv7/exynos/clock.c | 43 +- .../arm/cpu/armv7/exynos}/clock_init.h | 0 arch/arm/cpu/armv7/exynos/clock_init_exynos4.c | 95 ++ .../arm/cpu/armv7/exynos/clock_init_exynos5.c | 56 +- arch/arm/cpu/armv7/exynos/common_setup.h | 45 + .../arm/cpu/armv7/exynos}/dmc_common.c | 7 +- .../arm/cpu/armv7/exynos}/dmc_init_ddr3.c | 27 +- arch/arm/cpu/armv7/exynos/dmc_init_exynos4.c | 213 +++ .../arm/cpu/armv7/exynos/exynos4_setup.h | 397 +++-- .../arm/cpu/armv7/exynos/exynos5_setup.h | 28 +- arch/arm/cpu/armv7/exynos/lowlevel_init.c | 73 + arch/arm/cpu/armv7/exynos/pinmux.c | 40 + arch/arm/cpu/armv7/exynos/power.c | 50 + .../arm/cpu/armv7/exynos}/spl_boot.c | 84 +- arch/arm/cpu/armv7/omap-common/emif-common.c | 3 + arch/arm/cpu/armv7/omap5/hw_data.c | 2 + arch/arm/cpu/armv7/omap5/hwinit.c | 4 +- arch/arm/cpu/pxa/config.mk | 2 +- arch/arm/cpu/pxa/start.S | 3 +- arch/arm/dts/exynos5250.dtsi | 27 + arch/arm/include/asm/arch-am33xx/ddr_defs.h | 1 - arch/arm/include/asm/arch-am33xx/gpio.h | 2 + arch/arm/include/asm/arch-exynos/cpu.h | 13 +- arch/arm/include/asm/arch-exynos/power.h | 12 + arch/arm/include/asm/arch-exynos/spl.h | 1 + arch/arm/include/asm/arch-mx27/clock.h | 1 + arch/arm/include/asm/arch-mx6/imx-regs.h | 2 +- arch/arm/include/asm/arch-mx6/mx6dl_pins.h | 1591 +++++++++++++++++++- arch/arm/include/asm/arch-omap3/gpio.h | 2 + arch/arm/include/asm/arch-omap4/gpio.h | 2 + arch/arm/include/asm/arch-omap5/gpio.h | 4 + arch/arm/lib/relocate.S | 9 + doc/README.m28 => board/denx/m28evk/README | 4 +- .../freescale/mx28evk/README | 3 +- .../freescale/{mx6qsabresd => mx6sabresd}/Makefile | 2 +- .../mx6qsabresd.c => mx6sabresd/mx6sabresd.c} | 7 +- board/palmtreo680/Makefile | 34 + board/palmtreo680/README | 581 +++++++ board/palmtreo680/palmtreo680.c | 148 ++ .../exynos-uboot-spl.lds} | 0 board/samsung/dts/exynos5250-smdk5250.dts | 2 + board/samsung/dts/exynos5250-snow.dts | 26 + board/samsung/origen/Makefile | 11 +- board/samsung/origen/lowlevel_init.S | 357 ----- board/samsung/origen/mem_setup.S | 421 ------ board/samsung/origen/mmc_boot.c | 58 - board/samsung/origen/origen.c | 46 + board/samsung/smdk5250/Makefile | 14 +- board/samsung/smdk5250/smdk5250.c | 12 +- board/samsung/smdkv310/Makefile | 10 +- board/samsung/smdkv310/lowlevel_init.S | 414 ----- board/samsung/smdkv310/mem_setup.S | 365 ----- board/samsung/smdkv310/mmc_boot.c | 60 - board/samsung/smdkv310/smdkv310.c | 46 + board/wandboard/README | 5 + board/wandboard/wandboard.c | 2 +- boards.cfg | 7 +- doc/README.mx28_common | 75 +- drivers/block/dwc_ahsata.c | 34 +- drivers/gpio/omap_gpio.c | 2 +- drivers/gpio/s3c2440_gpio.c | 6 +- drivers/gpio/s5p_gpio.c | 9 +- drivers/i2c/s3c24x0_i2c.c | 3 +- drivers/power/battery/bat_trats.c | 13 +- drivers/power/power_core.c | 3 +- drivers/serial/serial_s5p.c | 78 + drivers/spi/mxc_spi.c | 28 +- drivers/usb/ulpi/omap-ulpi-viewport.c | 42 +- drivers/video/exynos_fimd.c | 3 +- drivers/video/mxsfb.c | 2 +- include/configs/exynos5250-dt.h | 12 +- include/configs/mx6qsabreauto.h | 2 +- .../{mx6qsabre_common.h => mx6sabre_common.h} | 1 - include/configs/{mx6qsabresd.h => mx6sabresd.h} | 2 +- include/configs/nitrogen6x.h | 6 +- include/configs/origen.h | 9 +- include/configs/palmtreo680.h | 286 ++++ include/configs/smdkv310.h | 8 +- include/configs/trats.h | 2 +- include/configs/vf610twr.h | 93 +- include/configs/wandboard.h | 2 + include/fdtdec.h | 1 + include/power/max77686_pmic.h | 2 + lib/fdtdec.c | 1 + tools/palmtreo680/flash_u-boot.c | 177 +++ 89 files changed, 4243 insertions(+), 2171 deletions(-) rename {board/samsung/smdk5250 => arch/arm/cpu/armv7/exynos}/clock_init.h (100%) create mode 100644 arch/arm/cpu/armv7/exynos/clock_init_exynos4.c rename board/samsung/smdk5250/clock_init.c => arch/arm/cpu/armv7/exynos/clock_init_exynos5.c (94%) create mode 100644 arch/arm/cpu/armv7/exynos/common_setup.h rename {board/samsung/smdk5250 => arch/arm/cpu/armv7/exynos}/dmc_common.c (97%) rename {board/samsung/smdk5250 => arch/arm/cpu/armv7/exynos}/dmc_init_ddr3.c (92%) create mode 100644 arch/arm/cpu/armv7/exynos/dmc_init_exynos4.c rename board/samsung/origen/origen_setup.h => arch/arm/cpu/armv7/exynos/exynos4_setup.h (65%) rename board/samsung/smdk5250/setup.h => arch/arm/cpu/armv7/exynos/exynos5_setup.h (96%) create mode 100644 arch/arm/cpu/armv7/exynos/lowlevel_init.c rename {board/samsung/smdk5250 => arch/arm/cpu/armv7/exynos}/spl_boot.c (73%) rename doc/README.m28 => board/denx/m28evk/README (75%) rename doc/README.mx28evk => board/freescale/mx28evk/README (93%) rename board/freescale/{mx6qsabresd => mx6sabresd}/Makefile (98%) rename board/freescale/{mx6qsabresd/mx6qsabresd.c => mx6sabresd/mx6sabresd.c} (98%) create mode 100644 board/palmtreo680/Makefile create mode 100644 board/palmtreo680/README create mode 100644 board/palmtreo680/palmtreo680.c rename board/samsung/{smdk5250/smdk5250-uboot-spl.lds => common/exynos-uboot-spl.lds} (100%) delete mode 100644 board/samsung/origen/lowlevel_init.S delete mode 100644 board/samsung/origen/mem_setup.S delete mode 100644 board/samsung/origen/mmc_boot.c delete mode 100644 board/samsung/smdkv310/lowlevel_init.S delete mode 100644 board/samsung/smdkv310/mem_setup.S delete mode 100644 board/samsung/smdkv310/mmc_boot.c rename include/configs/{mx6qsabre_common.h => mx6sabre_common.h} (99%) rename include/configs/{mx6qsabresd.h => mx6sabresd.h} (97%) create mode 100644 include/configs/palmtreo680.h create mode 100644 tools/palmtreo680/flash_u-boot.c
Amicalement,