I made a multi-file imgage as described here http://www.denx.de/twiki/bin/view/DULG/CombiningKernelAndRamdisk but I can't boot it bacuse the kernel does not find the ramdisk image. How to say to the kernel where to find it? Isuspect I'm missing some command line parameters ...
zefeer> bootm $(kraddr) ## Booting image at d0100000 ... Image Name: multi Image Type: ARM Linux Multi-File Image (gzip compressed) Data Size: 2991841 Bytes = 2.9 MB Load Address: d0008000 Entry Point: d0008000 Contents: Image 0: 1489174 Bytes = 1.4 MB Image 1: 1502653 Bytes = 1.4 MB Verifying Checksum ... OK Uncompressing Multi-File Image ... OK
Starting kernel ...
Uncompressing Linux............................................................................ .......................... done, booting the kernel. Linux version 2.6.9-rc2-ep93xx (llandre@linuxserver) (gcc version 3.3.3 (DENX ELDK 3.1 3.3.3-8) ) #1 Fri Aug 26 16:21:23 CEST 2005 CPU: ARM920Tid(wb) [41129200] revision 0 (ARMv4T) CPU: D VIVT write-back cache CPU: I cache: 16384 bytes, associativity 64, 32 byte lines, 8 sets CPU: D cache: 16384 bytes, associativity 64, 32 byte lines, 8 sets Machine: Zefeer DZQ initrd (0x5b79897c - 0x97a40860) extends beyond physical memory - disabling initrd Memory policy: ECC disabled, Data cache writeback Built 2 zonelists Kernel command line: ip=192.168.0.89:192.168.0.23::255.255.255.0:Zefeer:eth0:off panic=1 ethadd r=00:50:c2:1e:af:e0 root=/dev/ram console=ttyAM0,115200
[...]
IP-Config: Complete: device=eth0, addr=192.168.0.89, mask=255.255.255.0, gw=255.255.255.255, host=Zefeer, domain=, nis-domain=(none), bootserver=192.168.0.23, rootserver=192.168.0.23, rootpath= UDF-fs: No partition found (1) Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(1,0) <0>Rebooting in 1 seconds..
llandre
DAVE Electronics System House - R&D Department web: http://www.dave-tech.it email: r&d2@dave-tech.it