Explicit make commands were earlier used to generate tispl.bin image, now it is replaced using binman.
Binman picks up and packages entries according to the description of entries given in the binman node in the device tree. The make commands that were earlier responsible for generating tispl.bin has been removed.
k3-j721e-a72-binman.dtsi has been introduced for A72 specific binman node. It can be included in files that require it like k3-j721e-common-proc-board-u-boot.dtsi.
Note that make commands for secure devices has also been removed as focus is on general purpose devices at present time.
Signed-off-by: Tarun Sahu t-sahu@ti.com [n-francis@ti.com: prepared patch for upstreaming] Signed-off-by: Neha Malcom Francis n-francis@ti.com --- arch/arm/dts/k3-j721e-a72-binman.dtsi | 86 +++++++++++++++++++ .../k3-j721e-common-proc-board-u-boot.dtsi | 1 + arch/arm/mach-k3/config.mk | 33 ------- board/ti/j721e/Kconfig | 1 + scripts/Makefile.spl | 4 - 5 files changed, 88 insertions(+), 37 deletions(-) create mode 100644 arch/arm/dts/k3-j721e-a72-binman.dtsi
diff --git a/arch/arm/dts/k3-j721e-a72-binman.dtsi b/arch/arm/dts/k3-j721e-a72-binman.dtsi new file mode 100644 index 0000000000..beb3424bb9 --- /dev/null +++ b/arch/arm/dts/k3-j721e-a72-binman.dtsi @@ -0,0 +1,86 @@ +// SPDX-License-Identifier: GPL-2.0+ +// Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/ + +#include <config.h> + +#ifdef CONFIG_ARM64 +/ { + binman: binman { + multiple-images; + }; +}; + +&binman { + tispl { + filename = "tispl.bin"; + fit { + description = "FIT IMAGE"; + #address-cells = <1>; + images { + atf { + description = "ARM Trusted Firmware"; + type = "firmware"; + arch = "arm64"; + compression = "none"; + os = "arm-trusted-firmware"; + load = <CONFIG_K3_ATF_LOAD_ADDR>; + entry = <CONFIG_K3_ATF_LOAD_ADDR>; + atf-bl31 { + }; + }; + tee { + description = "OPTEE"; + type = "tee"; + arch = "arm64"; + compression = "none"; + os = "tee"; + load = <0x9e800000>; + entry = <0x9e800000>; + tee-os { + }; + }; + dm { + description = "DM binary"; + type = "firmware"; + arch = "arm32"; + compression = "none"; + os = "DM"; + load = <0x89000000>; + entry = <0x89000000>; + ti-dm { + }; + }; + spl { + description = "SPL (64-bit)"; + type = "standalone"; + os = "U-Boot"; + arch = "arm64"; + compression = "none"; + load = <CONFIG_SPL_TEXT_BASE>; + entry = <CONFIG_SPL_TEXT_BASE>; + u-boot-spl-nodtb { + }; + }; + k3-j721e-common-proc-board.dtb { + description = "k3-j721e-common-proc-board"; + type = "flat_dt"; + arch = "arm"; + compression = "none"; + blob-ext { + filename = "spl/dts/k3-j721e-common-proc-board.dtb"; + }; + }; + }; + configurations { + default = "conf"; + conf { + description = "k3-j721e-common-proc-board"; + firmware = "atf"; + loadables = "tee", "dm", "spl"; + fdt = "k3-j721e-common-proc-board.dtb"; + }; + }; + }; + }; +}; +#endif diff --git a/arch/arm/dts/k3-j721e-common-proc-board-u-boot.dtsi b/arch/arm/dts/k3-j721e-common-proc-board-u-boot.dtsi index 677a72d2a2..6490d71f7e 100644 --- a/arch/arm/dts/k3-j721e-common-proc-board-u-boot.dtsi +++ b/arch/arm/dts/k3-j721e-common-proc-board-u-boot.dtsi @@ -4,6 +4,7 @@ */
#include <dt-bindings/net/ti-dp83867.h> +#include "k3-j721e-a72-binman.dtsi"
/ { chosen { diff --git a/arch/arm/mach-k3/config.mk b/arch/arm/mach-k3/config.mk index 49f80ae79b..e0d9ea97c9 100644 --- a/arch/arm/mach-k3/config.mk +++ b/arch/arm/mach-k3/config.mk @@ -52,38 +52,5 @@ ifeq ($(CONFIG_SOC_K3_J721E),) export DM := /dev/null endif
-ifeq ($(CONFIG_TI_SECURE_DEVICE),y) -SPL_ITS := u-boot-spl-k3_HS.its -$(SPL_ITS): export IS_HS=1 -INPUTS-y += tispl.bin_HS -else -SPL_ITS := u-boot-spl-k3.its -INPUTS-y += tispl.bin -endif - -ifeq ($(CONFIG_SPL_OF_LIST),) -LIST_OF_DTB := $(CONFIG_DEFAULT_DEVICE_TREE) -else -LIST_OF_DTB := $(CONFIG_SPL_OF_LIST) endif - -quiet_cmd_k3_mkits = MKITS $@ -cmd_k3_mkits = \ - $(srctree)/tools/k3_fit_atf.sh \ - $(CONFIG_K3_ATF_LOAD_ADDR) \ - $(patsubst %,$(obj)/dts/%.dtb,$(subst ",,$(LIST_OF_DTB))) > $@ - -$(SPL_ITS): FORCE - $(call cmd,k3_mkits) endif - -else - -ifeq ($(CONFIG_TI_SECURE_DEVICE),y) -INPUTS-y += u-boot.img_HS -else -INPUTS-y += u-boot.img -endif -endif - -include $(srctree)/arch/arm/mach-k3/config_secure.mk diff --git a/board/ti/j721e/Kconfig b/board/ti/j721e/Kconfig index a3a9d504ae..3cf05f0d3b 100644 --- a/board/ti/j721e/Kconfig +++ b/board/ti/j721e/Kconfig @@ -14,6 +14,7 @@ config TARGET_J721E_A72_EVM select BOARD_LATE_INIT imply TI_I2C_BOARD_DETECT select SYS_DISABLE_DCACHE_OPS + select BINMAN
config TARGET_J721E_R5_EVM bool "TI K3 based J721E EVM running on R5" diff --git a/scripts/Makefile.spl b/scripts/Makefile.spl index 6ad82cecfb..5f8a8487c5 100644 --- a/scripts/Makefile.spl +++ b/scripts/Makefile.spl @@ -577,7 +577,3 @@ $(obj)/$(SPL_BIN).multidtb.fit.gz: $(obj)/$(SPL_BIN).multidtb.fit $(obj)/$(SPL_BIN).multidtb.fit.lzo: $(obj)/$(SPL_BIN).multidtb.fit @lzop -f9 $< > $@
-ifdef CONFIG_ARCH_K3 -tispl.bin: $(obj)/u-boot-spl-nodtb.bin $(SHRUNK_ARCH_DTB) $(SPL_ITS) FORCE - $(call if_changed,mkfitimage) -endif