On Tue, Mar 17, 2015 at 9:30 AM, Fabio Estevam festevam@gmail.com wrote:
On Mon, Mar 16, 2015 at 1:50 PM, Chris Kuethe chris.kuethe@gmail.com wrote:
U-Boot 2015.04-rc3-00209-ga74ef40-dirty (Mar 15 2015 - 22:04:22)
CPU: Freescale i.MX53 rev2.1 at 800 MHz Reset cause: WDOG
Here the reset cause is printed correctly. ... ,but here it fails.
Why does CPU version and reset cause are printed twice?
I noticed that too - will investigate that later tonight.
Is this happening with all mx53 boards or only with this one? I currently don't have access to any mx53 board to test this myself.
Can't say if this happens on other boards as this is the only mx53 I have. It also happens on -rc2
============= U-Boot 2015.04-rc2 (Mar 17 2015 - 01:35:15)
CPU: Freescale i.MX53 rev2.1 at 800 MHz Reset cause: POR Board: Inverse Path USB armory MkI I2C: ready DRAM: 512 MiB MMC: FSL_SDHC: 0 In: serial Out: serial Err: serial CPU: Freescale i.MX53 rev2.1 at 800 MHz Reset cause: unknown reset Net: CPU Net Initialization Failed No ethernet found. Hit any key to stop autoboot: 0 =============
I am adding some folks on Cc who may have access to other mx53 boards and could probably test whether we have a common mx53 issue here.
There was some discussion not long ago about reset cause handling (especially on mx6) which I haven't had a chance to fully digest yet.