Re: [U-Boot] [PATCH v3 04/12] i2c: pdm360ng: Drop use of CONFIG_I2C_HARD

Hello Simon,

Am 13.05.2017 um 05:09 schrieb Simon Glass:

Drop use of this long-deprecated option.

Signed-off-by: Simon Glass sjg@chromium.org

Changes in v3: None Changes in v2: None

board/pdm360ng/pdm360ng.c | 30 ------------------------------ 1 file changed, 30 deletions(-)

Thanks!

Applied to u-boot-i2c.git master

u-boot-i2c master just testing on travis: https://travis-ci.org/hsdenx/u-boot-i2c/builds/232288665

bye, Heiko

diff --git a/board/pdm360ng/pdm360ng.c b/board/pdm360ng/pdm360ng.c index 9db31d3312..371bcd9e6b 100644 --- a/board/pdm360ng/pdm360ng.c +++ b/board/pdm360ng/pdm360ng.c @@ -169,36 +169,6 @@ int misc_init_r(void) clrsetbits_be32(&im->gpio.gpdat, 0x01000000, 0x00040000); #endif

-#if defined(CONFIG_HARD_I2C)

• if (!getenv("ethaddr")) {

• uchar buf[6];
  

• uchar ifm_oui[3] = { 0, 2, 1, };
  

• int ret;
  

• /* I2C-0 for on-board eeprom */
  

• i2c_set_bus_num(CONFIG_SYS_I2C_EEPROM_BUS_NUM);
  

• /* Read ethaddr from EEPROM */
  

• ret = i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR,
  

• 	       CONFIG_SYS_I2C_EEPROM_MAC_OFFSET, 1, buf, 6);
  

• if (ret != 0) {
  

• 	printf("Error: Unable to read MAC from I2C"
  

• 		" EEPROM at address %02X:%02X\n",
  

• 		CONFIG_SYS_I2C_EEPROM_ADDR,
  

• 		CONFIG_SYS_I2C_EEPROM_MAC_OFFSET);
  

• 	return 1;
  

• }
  

• /* Owned by IFM ? */
  

• if (memcmp(buf, ifm_oui, sizeof(ifm_oui))) {
  

• 	printf("Illegal MAC address in EEPROM: %pM\n", buf);
  

• 	return 1;
  

• }
  

• eth_setenv_enetaddr("ethaddr", buf);
  

• }

-#endif /* defined(CONFIG_HARD_I2C) */

• return 0; }