These 2 options are no longer needed as now binman is used to build u-boot.rom.
Signed-off-by: Bin Meng bmeng.cn@gmail.com ---
Kconfig | 21 --------------------- arch/x86/Kconfig | 2 -- arch/x86/cpu/quark/Kconfig | 1 - doc/arch/x86.rst | 13 ++----------- 4 files changed, 2 insertions(+), 35 deletions(-)
diff --git a/Kconfig b/Kconfig index 76c0cdacb0..a6c42b902f 100644 --- a/Kconfig +++ b/Kconfig @@ -343,27 +343,6 @@ config HAS_ROM Enables building of a u-boot.rom target. This collects U-Boot and any necessary binary blobs.
-config ROM_NEEDS_BLOBS - bool - depends on HAS_ROM - help - Enable this if building the u-boot.rom target needs binary blobs, and - so cannot be done normally. In this case, U-Boot will only build the - ROM if the required blobs exist. If not, you will see an warning like: - - Image 'main-section' is missing external blobs and is non-functional: - intel-descriptor intel-me intel-refcode intel-vga intel-mrc - -config BUILD_ROM - bool "Build U-Boot as BIOS replacement" - depends on HAS_ROM - default y if !ROM_NEEDS_BLOBS - help - This option allows to build a ROM version of U-Boot. - The build process generally requires several binary blobs - which are not shipped in the U-Boot source tree. - Please, see doc/arch/x86.rst for details. - config SPL_IMAGE string "SPL image used in the combined SPL+U-Boot image" default "spl/boot.bin" if ARCH_AT91 && SPL_NAND_SUPPORT diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 970bdff37f..300b48505e 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -364,7 +364,6 @@ config HAVE_FSP depends on !EFI select USE_HOB select HAS_ROM - select ROM_NEEDS_BLOBS help Select this option to add an Firmware Support Package binary to the resulting U-Boot image. It is a binary blob which U-Boot uses @@ -525,7 +524,6 @@ config ENABLE_MRC_CACHE config HAVE_MRC bool "Add a System Agent binary" select HAS_ROM - select ROM_NEEDS_BLOBS depends on !HAVE_FSP help Select this option to add a System Agent binary to diff --git a/arch/x86/cpu/quark/Kconfig b/arch/x86/cpu/quark/Kconfig index 2fee38aed7..430cce184d 100644 --- a/arch/x86/cpu/quark/Kconfig +++ b/arch/x86/cpu/quark/Kconfig @@ -24,7 +24,6 @@ if INTEL_QUARK
config HAVE_RMU bool "Add a Remote Management Unit (RMU) binary" - select ROM_NEEDS_BLOBS help Select this option to add a Remote Management Unit (RMU) binary to the resulting U-Boot image. It is a data block (up to 64K) of diff --git a/doc/arch/x86.rst b/doc/arch/x86.rst index 2ebfed871b..0fdd43be80 100644 --- a/doc/arch/x86.rst +++ b/doc/arch/x86.rst @@ -42,17 +42,8 @@ Build Instructions for U-Boot as BIOS replacement (bare mode) ------------------------------------------------------------- Building a ROM version of U-Boot (hereafter referred to as u-boot.rom) is a little bit tricky, as generally it requires several binary blobs which are not -shipped in the U-Boot source tree. Due to this reason, the u-boot.rom build is -not turned on by default in the U-Boot source tree. Firstly, you need turn it -on by enabling the ROM build either via an environment variable:: - - $ export BUILD_ROM=y - -or via configuration:: - - CONFIG_BUILD_ROM=y - -Both tell the Makefile to build u-boot.rom as a target. +shipped in the U-Boot source tree. Due to this reason, the u-boot.rom build may +print some warnings if required binary blobs (e.g.: FSP) are not present.
CPU Microcode -------------