Hi Albert,
On Wed, Jan 8, 2014 at 10:44 PM, Albert ARIBAUD albert.u.boot@aribaud.net wrote:
Hi Jagannadha,
On Wed, 8 Jan 2014 15:53:07 +0530, Jagannadha Sutradharudu Teki jagannadha.sutradharudu-teki@xilinx.com wrote:
These changes are from u-boot-xlnx.git repo from git.xilinx.com and in addition of basic fdt support. This repo is well tested on xilinx zynq platform, hence pushing the same on upstream.
Excluded qspi and nand changes from previous series.
Please note that all this series available in u-boot-spi.git/master-xlnx repo.
-- Thanks, Jagan.
Changes for v4: - rebase to master - Removed CONFIG_SYS_NO_FLASH in zynq-common.h
As the series was rebased tu u-boot/master, not u-boot-arm/master, all patches adding board support failed to apply properly due to boards.cfg differences.
Yes - I saw this i'll rebase your u-boot-arm/master then.
I did resolve these manually, but at build-test time, all Zynq boards failed with "Makefile:11: *** Please define CONFIG_DEFAULT_DEVICE_TREE in your board header file. Stop." -- and were the only ones to do so.
Actually build will successful when you give the dts at runtime while building u-boot like Linux style. $ make DEVICE_TREE=<dts_file_name> ex: make DEVICE_TREE=zynq-zc702
This is the reason I am not defining this on individual pre-board configs. I guess this could be fine, please comment.