Hello!
I have a problem with using the USB stick Transcend Jetflash 350. After entering the command "usb reset" were getting three different results:
1. [OK] USB stick was found. 2. [ERROR] Message:
USB XHCI 1.10 scanning bus dwc3@10000000 for devices... usb_new_device: Cannot read configuration, skipping device 8564:1000
3. [ERROR] Message:
USB XHCI 1.10 scanning bus dwc3@10000000 for devices... WARN halted endpoint, queueing URB anyway. Unexpected XHCI event TRB, skipping... (9fb69170 00000008 13000000 01008401) BUG at drivers/usb/host/xhci-ring.c:530/abort_td()! BUG!
I tried to dump a USB transaction via Wireshark + USBPcap and noticed that several transactions were errors. After reading the docs "eXtensible Host Controller Interface for Universal Serial Bus" was realized the retry mechanism. It solved my problem.
Best regards, Mark Smith ---
From b887f8bb547b56f6a0c0c7102a9d232df6f174c6 Mon Sep 17 00:00:00 2001
From: Mark Smith zubastikiko@gmail.com Date: Thu, 1 Jun 2023 23:20:03 +0300 Subject: [PATCH] xhci: Add soft retry mechanism for control transaction
A Soft Retry may effectively be used to recover from a USB Transaction Error that was due to a temporary error condition.
Software shall limit the number of unsuccessful Soft Retry attempts to prevent an infinite loop.
For more details on Soft retry see xhci specs 4.6.8.1
Signed-off-by: Mark Smith zubastikiko@gmail.com --- drivers/usb/host/xhci-ring.c | 7 +++++++ drivers/usb/host/xhci.c | 12 +++++++++++- include/usb/xhci.h | 2 ++ 3 files changed, 20 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index c8260cbdf9..10f5fe4d06 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -580,6 +580,9 @@ static void record_transfer_result(struct usb_device *udev, case COMP_SHORT_TX: udev->status = 0; break; + case COMP_TX_ERR: + udev->status = USB_ST_CRC_ERR; + break; case COMP_STALL: udev->status = USB_ST_STALLED; break; @@ -979,6 +982,10 @@ int xhci_ctrl_tx(struct usb_device *udev, unsigned long pipe, reset_ep(udev, ep_index); return -EPIPE; } + if (udev->status == USB_ST_CRC_ERR ) { + reset_ep(udev, ep_index); + return -EAGAIN; + }
/* Invalidate buffer to make it available to usb-core */ if (length > 0) { diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 9e33c5d855..efb9fc2950 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -1156,6 +1156,7 @@ static int _xhci_submit_control_msg(struct usb_device *udev, unsigned long pipe, { struct xhci_ctrl *ctrl = xhci_get_ctrl(udev); int ret = 0; + int soft_reset_attempt = SOFT_RESET_ATTEMPTS;
if (usb_pipetype(pipe) != PIPE_CONTROL) { printf("non-control pipe (type=%lu)", usb_pipetype(pipe)); @@ -1178,7 +1179,16 @@ static int _xhci_submit_control_msg(struct usb_device *udev, unsigned long pipe, } }
- return xhci_ctrl_tx(udev, pipe, setup, length, buffer); + while(soft_reset_attempt > 0) + { + ret = xhci_ctrl_tx(udev, pipe, setup, length, buffer); + if (ret == -EAGAIN) + soft_reset_attempt--; + else + return ret; + } + printf("control transfer is unsuccessful after %d attempts\n", SOFT_RESET_ATTEMPTS); + return ret; }
static int xhci_lowlevel_init(struct xhci_ctrl *ctrl) diff --git a/include/usb/xhci.h b/include/usb/xhci.h index 4a4ac10229..9cc3bfaf3c 100644 --- a/include/usb/xhci.h +++ b/include/usb/xhci.h @@ -33,6 +33,8 @@ /* Section 5.3.3 - MaxPorts */ #define MAX_HC_PORTS 255
+#define SOFT_RESET_ATTEMPTS 3 + /* Up to 16 ms to halt an HC */ #define XHCI_MAX_HALT_USEC (16*1000)