Since commit 0e373c0ade8c ("spl: add SPL_RESET_SUPPORT"), reset is supported in SPL, enable this flag for STM32F SoCs family.
This allows to remove a specific case in RCC mfd driver.
Signed-off-by: Patrice Chotard patrice.chotard@st.com ---
arch/arm/mach-stm32/Kconfig | 1 + drivers/misc/stm32_rcc.c | 4 ---- 2 files changed, 1 insertion(+), 4 deletions(-)
diff --git a/arch/arm/mach-stm32/Kconfig b/arch/arm/mach-stm32/Kconfig index 13532843fbc8..759f54517662 100644 --- a/arch/arm/mach-stm32/Kconfig +++ b/arch/arm/mach-stm32/Kconfig @@ -48,6 +48,7 @@ config STM32F7 imply SPL_OS_BOOT select SPL_PINCTRL select SPL_RAM + select SPL_RESET_SUPPORT select SPL_SERIAL_SUPPORT select SPL_SYS_MALLOC_SIMPLE select SPL_TIMER diff --git a/drivers/misc/stm32_rcc.c b/drivers/misc/stm32_rcc.c index dee82c0b7b1e..980b3a58e1d8 100644 --- a/drivers/misc/stm32_rcc.c +++ b/drivers/misc/stm32_rcc.c @@ -53,13 +53,9 @@ static int stm32_rcc_bind(struct udevice *dev) if (ret) return ret;
-#ifdef CONFIG_SPL_BUILD - return 0; -#else return device_bind_driver_to_node(dev, "stm32_rcc_reset", "stm32_rcc_reset", dev_ofnode(dev), &child); -#endif }
static const struct misc_ops stm32_rcc_ops = {