On 15/04/2021 07:02, Dietmar Kling wrote:
Hi Guys,
Hi Dietmar,
I have created a branch on github regarding two bugfixes which allow my 5 nanpoi a64 to connect to network again and also again use the second usb port, when booting, when using the latest (v2021.04) u-boot.
Thanks for sharing this. Please include the sunxi maintainers in your email, for improved response time.
https://github.com/DirkTheDaring/u-boot/tree/bugfix/nanopi-a64 The patch is attached to this text email.
Please include into u-boot official.
Kind Regards Dietmar
Please note that patches need your Signed-off-by:, to be eligible for inclusion.
In general we don't take DT patches straight to U-Boot, they need to go via the kernel tree first, then get synced back from time to time. I just sent an update for all A64s, that should fix your network problem already.
For the USB part: The sunxi Wiki is a bit controversial on this topic (talking about a hub at some point), so can you clarify the USB situation on the board? Is controller 0 connected to the micro-USB socket, and the two type-A receptables are connected via a hub? Or is it like the Pine64: the two type-A receptables are connected to controller 0 and 1, and the micro-USB is just for power?
If it is the latter, I wonder how this patch works for you? I need another U-Boot patch [1] (which I want to send out shortly) to actually enable this port 0 as a host port, and also rely on a DT change (now merged in mainline Linux).
Cheers, Andre
diff --git a/arch/arm/dts/sun50i-a64-nanopi-a64.dts b/arch/arm/dts/sun50i-a64-nanopi-a64.dts index e58db8a6ca..a5c78bdb81 100644 --- a/arch/arm/dts/sun50i-a64-nanopi-a64.dts +++ b/arch/arm/dts/sun50i-a64-nanopi-a64.dts @@ -80,7 +80,7 @@ &emac { pinctrl-names = "default"; pinctrl-0 = <&rgmii_pins>;
- phy-mode = "rgmii";
- phy-mode = "rgmii-id";
phy-handle = <&ext_rgmii_phy>; phy-supply = <®_dcdc1>; status = "okay"; @@ -258,6 +258,11 @@ status = "okay"; }; +&usb_otg {
- dr_mode = "host";
- status = "okay";
+};
&usbphy { status = "okay"; };