On Mon, May 20, 2013 at 02:07:27PM +0800, ying.zhang@freescale.com wrote:
From: Ying Zhang b40530@freescale.com
There was some functionality will be used in the SPL. They had been excluded by ifndef CONFIG_SPL_BUILD. Now, put it into the SPL.
Signed-off-by: Ying Zhang b40530@freescale.com
arch/powerpc/cpu/mpc85xx/tlb.c | 2 +- arch/powerpc/cpu/mpc8xxx/law.c | 4 ++--
In these cases can we not just always build them, aside from when CONFIG_NAND_SPL is set and rely on link-time discard here? Otherwise:
-#if !defined(CONFIG_NAND_SPL) && !defined(CONFIG_SPL_BUILD) +#if !defined(CONFIG_NAND_SPL) && !defined(CONFIG_SPL_NAND_MINIMAL)
Should become, I believe (and this isn't whitespaced properly): #if !defined(CONFIG_NAND_SPL) && !(defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_NAND_MINIMAL))
So that:
diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h
[snip]
diff --git a/include/configs/P1022DS.h b/include/configs/P1022DS.h
[snip]
diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h
Can then all be dropped.