From: Sjoerd Simons sjoerd.simons@collabora.co.uk
Add support for the Bosch Guardian board.
CPU : AM335X-GP rev 2.1 Model: Bosch AM335x Guardian I2C: ready DRAM: 256 MiB NAND: 512 MiB MMC: OMAP SD/MMC: 0
Signed-off-by: Sjoerd Simons sjoerd.simons@collabora.co.uk Signed-off-by: Martyn Welch martyn.welch@collabora.com Reviewed-by: Tom Rini trini@konsulko.com
---
Changes in v3: - Removed unneeded #address-cells and #size-cells properties from dtb - Correctly order include files
Changes in v2: - Correct guard #ifdef naming in board config header - Remove missed cruft from board files
arch/arm/Kconfig | 1 + arch/arm/dts/am335x-guardian-u-boot.dtsi | 66 +++ arch/arm/dts/am335x-guardian.dts | 509 +++++++++++++++++++++++ arch/arm/mach-omap2/am33xx/Kconfig | 7 + board/bosch/guardian/Kconfig | 15 + board/bosch/guardian/MAINTAINERS | 6 + board/bosch/guardian/Makefile | 12 + board/bosch/guardian/board.c | 186 +++++++++ board/bosch/guardian/board.h | 17 + board/bosch/guardian/mux.c | 99 +++++ configs/am335x_guardian_defconfig | 90 ++++ include/configs/am335x_guardian.h | 111 +++++ 12 files changed, 1119 insertions(+) create mode 100644 arch/arm/dts/am335x-guardian-u-boot.dtsi create mode 100644 arch/arm/dts/am335x-guardian.dts create mode 100644 board/bosch/guardian/Kconfig create mode 100644 board/bosch/guardian/MAINTAINERS create mode 100644 board/bosch/guardian/Makefile create mode 100644 board/bosch/guardian/board.c create mode 100644 board/bosch/guardian/board.h create mode 100644 board/bosch/guardian/mux.c create mode 100644 configs/am335x_guardian_defconfig create mode 100644 include/configs/am335x_guardian.h
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 455f06cfee..d2b3dce2da 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1524,6 +1524,7 @@ source "arch/arm/cpu/armv8/Kconfig" source "arch/arm/mach-imx/Kconfig"
source "board/bosch/shc/Kconfig" +source "board/bosch/guardian/Kconfig" source "board/CarMediaLab/flea3/Kconfig" source "board/Marvell/aspenite/Kconfig" source "board/Marvell/gplugd/Kconfig" diff --git a/arch/arm/dts/am335x-guardian-u-boot.dtsi b/arch/arm/dts/am335x-guardian-u-boot.dtsi new file mode 100644 index 0000000000..156b9b0e83 --- /dev/null +++ b/arch/arm/dts/am335x-guardian-u-boot.dtsi @@ -0,0 +1,66 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2018 EETS GmbH - https://www.eets.ch/ + * Copyright (C) 2018 Robert Bosch Power Tools GmbH + */ + +/ { + ocp { + u-boot,dm-pre-reloc; + }; +}; + +&l4_wkup { + u-boot,dm-pre-reloc; +}; + +&mmc1 { + u-boot,dm-pre-reloc; +}; + +&mmc1_pins { + u-boot,dm-pre-reloc; +}; + +&rtc { + clocks = <&l4_per_clkctrl AM3_CLKDIV32K_CLKCTRL 0>; + clock-names = "int-clk"; +}; + +&scm { + u-boot,dm-pre-reloc; +}; + +&uart0 { + u-boot,dm-pre-reloc; +}; + +&uart0_pins { + u-boot,dm-pre-reloc; +}; + +&usb { + u-boot,dm-pre-reloc; +}; + +&usb_ctrl_mod { + u-boot,dm-pre-reloc; +}; + +&usb0 { + u-boot,dm-pre-reloc; +}; + +&usb0_phy { + u-boot,dm-pre-reloc; +}; + +&am33xx_pinmux { + u-boot,dm-pre-reloc; + + lcd0_pins: pinmux_lcd0_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x908, PIN_OUTPUT_PULLUP | MUX_MODE7) + >; + }; +}; diff --git a/arch/arm/dts/am335x-guardian.dts b/arch/arm/dts/am335x-guardian.dts new file mode 100644 index 0000000000..f3f022c375 --- /dev/null +++ b/arch/arm/dts/am335x-guardian.dts @@ -0,0 +1,509 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2018 Robert Bosch Power Tools GmbH + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + model = "Bosch AM335x Guardian"; + compatible = "bosch,am335x-guardian", "ti,am33xx"; + + chosen { + stdout-path = &uart0; + tick-timer = &timer2; + }; + + cpus { + cpu@0 { + cpu0-supply = <&dcdc2_reg>; + }; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x10000000>; /* 256 MB */ + }; + + gpio_keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_pins>; + + button21 { + label = "guardian-power-button"; + linux,code = <KEY_POWER>; + gpios = <&gpio2 21 0>; + wakeup-source; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&leds_pins>; + + led1 { + label = "green:heartbeat"; + gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + + led2 { + label = "green:mmc0"; + gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + }; + + panel { + compatible = "ti,tilcdc,panel"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&lcd_pins_default &lcd_disen_pins>; + pinctrl-1 = <&lcd_pins_sleep>; + + display-timings { + 320x240 { + hactive = <320>; + vactive = <240>; + hback-porch = <68>; + hfront-porch = <20>; + hsync-len = <1>; + vback-porch = <18>; + vfront-porch = <4>; + vsync-len = <1>; + clock-frequency = <9000000>; + hsync-active = <0>; + vsync-active = <0>; + }; + }; + panel-info { + ac-bias = <255>; + ac-bias-intrpt = <0>; + dma-burst-sz = <16>; + bpp = <24>; + bus-width = <16>; + fdd = <0x80>; + sync-edge = <0>; + sync-ctrl = <1>; + raster-order = <0>; + fifo-th = <0>; + }; + + }; + + pwm7: dmtimer-pwm { + compatible = "ti,omap-dmtimer-pwm"; + ti,timers = <&timer7>; + pinctrl-names = "default"; + pinctrl-0 = <&dmtimer7_pins>; + }; + + vmmcsd_fixed: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "vmmcsd_fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&cppi41dma { + status = "okay"; +}; + +&elm { + status = "okay"; +}; + +&gpmc { + pinctrl-names = "default"; + pinctrl-0 = <&nandflash_pins>; + ranges = <0 0 0x08000000 0x1000000>; /* CS0: 16MB for NAND */ + status = "okay"; + + nand@0,0 { + compatible = "ti,omap2-nand"; + reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ + rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */ + ti,nand-ecc-opt = "bch16"; + ti,elm-id = <&elm>; + nand-bus-width = <8>; + gpmc,device-width = <1>; + gpmc,sync-clk-ps = <0>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <44>; + gpmc,cs-wr-off-ns = <44>; + gpmc,adv-on-ns = <6>; + gpmc,adv-rd-off-ns = <34>; + gpmc,adv-wr-off-ns = <44>; + gpmc,we-on-ns = <0>; + gpmc,we-off-ns = <40>; + gpmc,oe-on-ns = <0>; + gpmc,oe-off-ns = <54>; + gpmc,access-ns = <64>; + gpmc,rd-cycle-ns = <82>; + gpmc,wr-cycle-ns = <82>; + gpmc,bus-turnaround-ns = <0>; + gpmc,cycle2cycle-delay-ns = <0>; + gpmc,clk-activation-ns = <0>; + gpmc,wr-access-ns = <40>; + gpmc,wr-data-mux-bus-ns = <0>; + + /* + * MTD partition table + * + * All SPL-* partitions are sized to minimal length which can + * be independently programmable. For NAND flash this is equal + * to size of erase-block. + */ + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "SPL"; + reg = <0x0 0x40000>; + }; + + partition@1 { + label = "SPL.backup1"; + reg = <0x40000 0x40000>; + }; + + partition@2 { + label = "SPL.backup2"; + reg = <0x80000 0x40000>; + }; + + partition@3 { + label = "SPL.backup3"; + reg = <0xc0000 0x40000>; + }; + + partition@4 { + label = "u-boot"; + reg = <0x100000 0x100000>; + }; + + partition@5 { + label = "u-boot.backup1"; + reg = <0x200000 0x100000>; + }; + + partition@6 { + label = "u-boot-env"; + reg = <0x300000 0x40000>; + }; + + partition@7 { + label = "u-boot-env.backup1"; + reg = <0x340000 0x40000>; + }; + + partition@8 { + label = "UBI"; + reg = <0x380000 0x1fc80000>; + }; + }; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + clock-frequency = <400000>; + status = "okay"; + + tps: tps@24 { + reg = <0x24>; + }; +}; + +&lcdc { + blue-and-red-wiring = "crossed"; + status = "okay"; +}; + +&mmc1 { + bus-width = <0x4>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; + vmmc-supply = <&vmmcsd_fixed>; + status = "okay"; +}; + +&rtc { + clocks = <&clk_32768_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>; + clock-names = "ext-clk", "int-clk"; + system-power-controller; +}; + +&spi0 { + ti,pindir-d0-out-d1-in; + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins>; + status = "okay"; +}; + +/include/ "tps65217.dtsi" + +&tps { + ti,pmic-shutdown-controller; + interrupt-parent = <&intc>; + interrupts = <7>; /* NMI */ + + backlight { + isel = <1>; /* 1 - ISET1, 2 ISET2 */ + fdim = <100>; /* TPS65217_BL_FDIM_100HZ */ + default-brightness = <100>; + }; + + regulators { + dcdc1_reg: regulator@0 { + regulator-name = "vdds_dpr"; + regulator-always-on; + }; + + dcdc2_reg: regulator@1 { + regulator-name = "vdd_mpu"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <1351500>; + regulator-boot-on; + regulator-always-on; + }; + + dcdc3_reg: regulator@2 { + regulator-name = "vdd_core"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <1150000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1_reg: regulator@3 { + regulator-name = "vio,vrtc,vdds"; + regulator-always-on; + }; + + ldo2_reg: regulator@4 { + regulator-name = "vdd_3v3aux"; + regulator-always-on; + }; + + ldo3_reg: regulator@5 { + regulator-name = "vdd_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo4_reg: regulator@6 { + regulator-name = "vdd_3v3a"; + regulator-always-on; + }; + }; +}; + +&tscadc { + status = "okay"; + + adc { + ti,adc-channels = <0 1 2 3 4 5 6>; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + status = "okay"; +}; + +&usb { + status = "okay"; +}; + +&usb_ctrl_mod { + status = "okay"; +}; + +&usb0 { + dr_mode = "peripheral"; + status = "okay"; +}; + +&usb0_phy { + status = "okay"; +}; + +&usb1 { + dr_mode = "host"; + status = "okay"; +}; + +&usb1_phy { + status = "okay"; +}; + +&am33xx_pinmux { + pinctrl-names = "default"; + pinctrl-0 = <&clkout2_pin &gpio_pins>; + + clkout2_pin: pinmux_clkout2_pin { + pinctrl-single,pins = < + AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3) + >; + }; + + dmtimer7_pins: pinmux_dmtimer7_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x968, PIN_OUTPUT | MUX_MODE5) + >; + }; + + gpio_keys_pins: pinmux_gpio_keys_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x940, PIN_INPUT | MUX_MODE7) + >; + }; + + gpio_pins: pinmux_gpio_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x928, PIN_OUTPUT | MUX_MODE7) + AM33XX_IOPAD(0x990, PIN_OUTPUT | MUX_MODE7) + >; + }; + + i2c0_pins: pinmux_i2c0_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) + AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) + >; + }; + + lcd_disen_pins: pinmux_lcd_disen_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x9a4, PIN_OUTPUT_PULLUP | SLEWCTRL_SLOW | MUX_MODE7) + >; + }; + + lcd_pins_default: pinmux_lcd_pins_default { + pinctrl-single,pins = < + AM33XX_IOPAD(0x820, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1) + AM33XX_IOPAD(0x824, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1) + AM33XX_IOPAD(0x828, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1) + AM33XX_IOPAD(0x82c, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1) + AM33XX_IOPAD(0x830, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1) + AM33XX_IOPAD(0x834, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1) + AM33XX_IOPAD(0x838, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1) + AM33XX_IOPAD(0x83c, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1) + AM33XX_IOPAD(0x8a0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + AM33XX_IOPAD(0x8a4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + AM33XX_IOPAD(0x8a8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + AM33XX_IOPAD(0x8ac, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + AM33XX_IOPAD(0x8b0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + AM33XX_IOPAD(0x8b4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + AM33XX_IOPAD(0x8b8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + AM33XX_IOPAD(0x8bc, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + AM33XX_IOPAD(0x8c0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + AM33XX_IOPAD(0x8c4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + AM33XX_IOPAD(0x8c8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + AM33XX_IOPAD(0x8cc, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + AM33XX_IOPAD(0x8d0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + AM33XX_IOPAD(0x8d4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + AM33XX_IOPAD(0x8d8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + AM33XX_IOPAD(0x8dc, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + AM33XX_IOPAD(0x8e0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + AM33XX_IOPAD(0x8e4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + AM33XX_IOPAD(0x8e8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + AM33XX_IOPAD(0x8ec, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + >; + }; + + lcd_pins_sleep: pinmux_lcd_pins_sleep { + pinctrl-single,pins = < + AM33XX_IOPAD(0x8a0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + AM33XX_IOPAD(0x8a4, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + AM33XX_IOPAD(0x8a8, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + AM33XX_IOPAD(0x8ac, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + AM33XX_IOPAD(0x8b0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + AM33XX_IOPAD(0x8b4, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + AM33XX_IOPAD(0x8b8, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + AM33XX_IOPAD(0x8bc, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + AM33XX_IOPAD(0x8c0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + AM33XX_IOPAD(0x8c4, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + AM33XX_IOPAD(0x8c8, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + AM33XX_IOPAD(0x8cc, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + AM33XX_IOPAD(0x8d0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + AM33XX_IOPAD(0x8d4, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + AM33XX_IOPAD(0x8d8, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + AM33XX_IOPAD(0x8dc, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + AM33XX_IOPAD(0x8e0, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW | MUX_MODE7) + AM33XX_IOPAD(0x8e4, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW | MUX_MODE7) + AM33XX_IOPAD(0x8e8, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW | MUX_MODE7) + AM33XX_IOPAD(0x8ec, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW | MUX_MODE7) + >; + }; + + leds_pins: pinmux_leds_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x868, PIN_OUTPUT | MUX_MODE7) + AM33XX_IOPAD(0x86c, PIN_OUTPUT | MUX_MODE7) + >; + }; + + mmc1_pins: pinmux_mmc1_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) + AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) + AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) + AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) + AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) + AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) + AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) + >; + }; + + spi0_pins: pinmux_spi0_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x950, PIN_OUTPUT_PULLDOWN | MUX_MODE0) + AM33XX_IOPAD(0x954, PIN_OUTPUT_PULLUP | MUX_MODE0) + AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0) + AM33XX_IOPAD(0x95c, PIN_OUTPUT_PULLUP | MUX_MODE0) + >; + }; + + uart0_pins: pinmux_uart0_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) + AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) + >; + }; + + nandflash_pins: pinmux_nandflash_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x800, PIN_INPUT | MUX_MODE0) + AM33XX_IOPAD(0x804, PIN_INPUT | MUX_MODE0) + AM33XX_IOPAD(0x808, PIN_INPUT | MUX_MODE0) + AM33XX_IOPAD(0x80c, PIN_INPUT | MUX_MODE0) + AM33XX_IOPAD(0x810, PIN_INPUT | MUX_MODE0) + AM33XX_IOPAD(0x814, PIN_INPUT | MUX_MODE0) + AM33XX_IOPAD(0x818, PIN_INPUT | MUX_MODE0) + AM33XX_IOPAD(0x81c, PIN_INPUT | MUX_MODE0) + AM33XX_IOPAD(0x870, PIN_INPUT | MUX_MODE0) + AM33XX_IOPAD(0x874, PIN_OUTPUT | MUX_MODE0) + AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0) + AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0) + AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0) + AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0) + AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0) + >; + }; +}; diff --git a/arch/arm/mach-omap2/am33xx/Kconfig b/arch/arm/mach-omap2/am33xx/Kconfig index 85ea8946b0..500df1aa11 100644 --- a/arch/arm/mach-omap2/am33xx/Kconfig +++ b/arch/arm/mach-omap2/am33xx/Kconfig @@ -87,6 +87,13 @@ config TARGET_AM335X_SHC imply CMD_DM imply CMD_SPL
+config TARGET_AM335X_GUARDIAN + bool "Support am335x based guardian board from bosch" + select DM + select DM_SERIAL + select DM_GPIO + select DM_USB + config TARGET_AM335X_SL50 bool "Support am335x_sl50" select BOARD_LATE_INIT diff --git a/board/bosch/guardian/Kconfig b/board/bosch/guardian/Kconfig new file mode 100644 index 0000000000..1417da61f0 --- /dev/null +++ b/board/bosch/guardian/Kconfig @@ -0,0 +1,15 @@ +if TARGET_AM335X_GUARDIAN + +config SYS_BOARD + default "guardian" + +config SYS_VENDOR + default "bosch" + +config SYS_SOC + default "am33xx" + +config SYS_CONFIG_NAME + default "am335x_guardian" + +endif diff --git a/board/bosch/guardian/MAINTAINERS b/board/bosch/guardian/MAINTAINERS new file mode 100644 index 0000000000..8d16ec0202 --- /dev/null +++ b/board/bosch/guardian/MAINTAINERS @@ -0,0 +1,6 @@ +Guardian BOARD +M: Sjoerd Simons sjoerd.simons@collabora.co.uk +S: Maintained +F: board/bosch/guardian/ +F: include/configs/am335x_guardian.h +F: configs/am335x_guardian_defconfig diff --git a/board/bosch/guardian/Makefile b/board/bosch/guardian/Makefile new file mode 100644 index 0000000000..11625c9dd6 --- /dev/null +++ b/board/bosch/guardian/Makefile @@ -0,0 +1,12 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# Makefile +# +# Copyright (C) 2018 Robert Bosch Power Tools GmbH +# + +ifeq ($(CONFIG_SKIP_LOWLEVEL_INIT),) +obj-y := mux.o +endif + +obj-y += board.o diff --git a/board/bosch/guardian/board.c b/board/bosch/guardian/board.c new file mode 100644 index 0000000000..86ab180f5c --- /dev/null +++ b/board/bosch/guardian/board.c @@ -0,0 +1,186 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * board.c + * + * Board functions for Bosch Guardian + * + * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/ + * Copyright (C) 2018 Robert Bosch Power Tools GmbH + */ + +#include <common.h> +#include <cpsw.h> +#include <dm.h> +#include <environment.h> +#include <environment.h> +#include <errno.h> +#include <i2c.h> +#include <miiphy.h> +#include <panel.h> +#include <power/tps65217.h> +#include <power/tps65910.h> +#include <spl.h> +#include <watchdog.h> +#include <asm/arch/clock.h> +#include <asm/arch/cpu.h> +#include <asm/arch/ddr_defs.h> +#include <asm/arch/gpio.h> +#include <asm/arch/hardware.h> +#include <asm/arch/mem.h> +#include <asm/arch/mmc_host_def.h> +#include <asm/arch/omap.h> +#include <asm/arch/sys_proto.h> +#include <asm/emif.h> +#include <asm/gpio.h> +#include <asm/io.h> +#include "board.h" + +DECLARE_GLOBAL_DATA_PTR; + +#ifndef CONFIG_SKIP_LOWLEVEL_INIT +static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE; + +static const struct ddr_data ddr3_data = { + .datardsratio0 = MT41K128M16JT125K_RD_DQS, + .datawdsratio0 = MT41K128M16JT125K_WR_DQS, + .datafwsratio0 = MT41K128M16JT125K_PHY_FIFO_WE, + .datawrsratio0 = MT41K128M16JT125K_PHY_WR_DATA, +}; + +static const struct cmd_control ddr3_cmd_ctrl_data = { + .cmd0csratio = MT41K128M16JT125K_RATIO, + .cmd0iclkout = MT41K128M16JT125K_INVERT_CLKOUT, + + .cmd1csratio = MT41K128M16JT125K_RATIO, + .cmd1iclkout = MT41K128M16JT125K_INVERT_CLKOUT, + + .cmd2csratio = MT41K128M16JT125K_RATIO, + .cmd2iclkout = MT41K128M16JT125K_INVERT_CLKOUT, +}; + +static struct emif_regs ddr3_emif_reg_data = { + .sdram_config = MT41K128M16JT125K_EMIF_SDCFG, + .ref_ctrl = MT41K128M16JT125K_EMIF_SDREF, + .sdram_tim1 = MT41K128M16JT125K_EMIF_TIM1, + .sdram_tim2 = MT41K128M16JT125K_EMIF_TIM2, + .sdram_tim3 = MT41K128M16JT125K_EMIF_TIM3, + .zq_config = MT41K128M16JT125K_ZQ_CFG, + .emif_ddr_phy_ctlr_1 = MT41K128M16JT125K_EMIF_READ_LATENCY, +}; + +#define OSC (V_OSCK / 1000000) +const struct dpll_params dpll_ddr = { + 400, OSC - 1, 1, -1, -1, -1, -1}; + +void am33xx_spl_board_init(void) +{ + int mpu_vdd; + int usb_cur_lim; + + /* Get the frequency */ + dpll_mpu_opp100.m = am335x_get_efuse_mpu_max_freq(cdev); + + if (i2c_probe(TPS65217_CHIP_PM)) + return; + + /* + * Increase USB current limit to 1300mA or 1800mA and set + * the MPU voltage controller as needed. + */ + if (dpll_mpu_opp100.m == MPUPLL_M_1000) { + usb_cur_lim = TPS65217_USB_INPUT_CUR_LIMIT_1800MA; + mpu_vdd = TPS65217_DCDC_VOLT_SEL_1325MV; + } else { + usb_cur_lim = TPS65217_USB_INPUT_CUR_LIMIT_1300MA; + mpu_vdd = TPS65217_DCDC_VOLT_SEL_1275MV; + } + + if (tps65217_reg_write(TPS65217_PROT_LEVEL_NONE, + TPS65217_POWER_PATH, + usb_cur_lim, + TPS65217_USB_INPUT_CUR_LIMIT_MASK)) + puts("tps65217_reg_write failure\n"); + + /* Set DCDC3 (CORE) voltage to 1.125V */ + if (tps65217_voltage_update(TPS65217_DEFDCDC3, + TPS65217_DCDC_VOLT_SEL_1125MV)) { + puts("tps65217_voltage_update failure\n"); + return; + } + + /* Set CORE Frequencies to OPP100 */ + do_setup_dpll(&dpll_core_regs, &dpll_core_opp100); + + /* Set DCDC2 (MPU) voltage */ + if (tps65217_voltage_update(TPS65217_DEFDCDC2, mpu_vdd)) { + puts("tps65217_voltage_update failure\n"); + return; + } + + /* + * Set LDO3 to 1.8V and LDO4 to 3.3V + */ + if (tps65217_reg_write(TPS65217_PROT_LEVEL_2, + TPS65217_DEFLS1, + TPS65217_LDO_VOLTAGE_OUT_1_8, + TPS65217_LDO_MASK)) + puts("tps65217_reg_write failure\n"); + + if (tps65217_reg_write(TPS65217_PROT_LEVEL_2, + TPS65217_DEFLS2, + TPS65217_LDO_VOLTAGE_OUT_3_3, + TPS65217_LDO_MASK)) + puts("tps65217_reg_write failure\n"); + + /* Set MPU Frequency to what we detected now that voltages are set */ + do_setup_dpll(&dpll_mpu_regs, &dpll_mpu_opp100); +} + +const struct dpll_params *get_dpll_ddr_params(void) +{ + enable_i2c0_pin_mux(); + i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE); + + return &dpll_ddr; +} + +void set_uart_mux_conf(void) +{ + enable_uart0_pin_mux(); +} + +void set_mux_conf_regs(void) +{ + enable_board_pin_mux(); +} + +const struct ctrl_ioregs ioregs = { + .cm0ioctl = MT41K128M16JT125K_IOCTRL_VALUE, + .cm1ioctl = MT41K128M16JT125K_IOCTRL_VALUE, + .cm2ioctl = MT41K128M16JT125K_IOCTRL_VALUE, + .dt0ioctl = MT41K128M16JT125K_IOCTRL_VALUE, + .dt1ioctl = MT41K128M16JT125K_IOCTRL_VALUE, +}; + +void sdram_init(void) +{ + config_ddr(400, &ioregs, + &ddr3_data, + &ddr3_cmd_ctrl_data, + &ddr3_emif_reg_data, 0); +} +#endif + +int board_init(void) +{ +#if defined(CONFIG_HW_WATCHDOG) + hw_watchdog_init(); +#endif + + gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; + +#ifdef CONFIG_NAND + gpmc_init(); +#endif + return 0; +} diff --git a/board/bosch/guardian/board.h b/board/bosch/guardian/board.h new file mode 100644 index 0000000000..b301caf47f --- /dev/null +++ b/board/bosch/guardian/board.h @@ -0,0 +1,17 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * board.h + * + * Board header for Bosch Guardian + * + * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/ + * Copyright (C) 2018 Robert Bosch Power Tools GmbH + */ + +#ifndef _BOARD_H_ +#define _BOARD_H_ + +void enable_uart0_pin_mux(void); +void enable_i2c0_pin_mux(void); +void enable_board_pin_mux(void); +#endif diff --git a/board/bosch/guardian/mux.c b/board/bosch/guardian/mux.c new file mode 100644 index 0000000000..708c3e7fdd --- /dev/null +++ b/board/bosch/guardian/mux.c @@ -0,0 +1,99 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * mux.c + * + * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/ + * Copyright (C) 2018 Robert Bosch Power Tools GmbH + */ + +#include <common.h> +#include <i2c.h> +#include <asm/arch/hardware.h> +#include <asm/arch/mux.h> +#include <asm/arch/sys_proto.h> +#include <asm/io.h> +#include "board.h" + +static struct module_pin_mux uart0_pin_mux[] = { + {OFFSET(uart0_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)}, + {OFFSET(uart0_txd), (MODE(0) | PULLUDEN)}, + {-1}, +}; + +static struct module_pin_mux i2c0_pin_mux[] = { + {OFFSET(i2c0_sda), (MODE(0) | RXACTIVE | PULLUDEN | SLEWCTRL)}, + {OFFSET(i2c0_scl), (MODE(0) | RXACTIVE | PULLUDEN | SLEWCTRL)}, + {-1}, +}; + +static struct module_pin_mux adc_voltages_en[] = { + {OFFSET(mcasp0_ahclkx), (MODE(7) | PULLUP_EN)}, + {-1}, +}; + +static struct module_pin_mux asp_power_en[] = { + {OFFSET(mcasp0_aclkx), (MODE(7) | PULLUP_EN)}, + {-1}, +}; + +static struct module_pin_mux switch_off_3v6_pin_mux[] = { + {OFFSET(mii1_txd0), (MODE(7) | PULLUP_EN)}, + /* + * The uart1 lines are made floating inputs, based on the Guardian + * A2 Sample Power Supply Schematics + */ + {OFFSET(uart1_rxd), (MODE(7) | PULLUDDIS)}, + {OFFSET(uart1_txd), (MODE(7) | PULLUDDIS)}, + {-1}, +}; + +#ifdef CONFIG_NAND +static struct module_pin_mux nand_pin_mux[] = { + {OFFSET(gpmc_ad0), (MODE(0) | PULLUDDIS | RXACTIVE)}, + {OFFSET(gpmc_ad1), (MODE(0) | PULLUDDIS | RXACTIVE)}, + {OFFSET(gpmc_ad2), (MODE(0) | PULLUDDIS | RXACTIVE)}, + {OFFSET(gpmc_ad3), (MODE(0) | PULLUDDIS | RXACTIVE)}, + {OFFSET(gpmc_ad4), (MODE(0) | PULLUDDIS | RXACTIVE)}, + {OFFSET(gpmc_ad5), (MODE(0) | PULLUDDIS | RXACTIVE)}, + {OFFSET(gpmc_ad6), (MODE(0) | PULLUDDIS | RXACTIVE)}, + {OFFSET(gpmc_ad7), (MODE(0) | PULLUDDIS | RXACTIVE)}, +#ifdef CONFIG_SYS_NAND_BUSWIDTH_16BIT + {OFFSET(gpmc_ad8), (MODE(0) | PULLUDDIS | RXACTIVE)}, + {OFFSET(gpmc_ad9), (MODE(0) | PULLUDDIS | RXACTIVE)}, + {OFFSET(gpmc_ad10), (MODE(0) | PULLUDDIS | RXACTIVE)}, + {OFFSET(gpmc_ad11), (MODE(0) | PULLUDDIS | RXACTIVE)}, + {OFFSET(gpmc_ad12), (MODE(0) | PULLUDDIS | RXACTIVE)}, + {OFFSET(gpmc_ad13), (MODE(0) | PULLUDDIS | RXACTIVE)}, + {OFFSET(gpmc_ad14), (MODE(0) | PULLUDDIS | RXACTIVE)}, + {OFFSET(gpmc_ad15), (MODE(0) | PULLUDDIS | RXACTIVE)}, +#endif + {OFFSET(gpmc_wait0), (MODE(0) | PULLUP_EN | RXACTIVE)}, + {OFFSET(gpmc_wpn), (MODE(7) | PULLUP_EN)}, + {OFFSET(gpmc_csn0), (MODE(0) | PULLUP_EN)}, + {OFFSET(gpmc_wen), (MODE(0) | PULLDOWN_EN)}, + {OFFSET(gpmc_oen_ren), (MODE(0) | PULLDOWN_EN)}, + {OFFSET(gpmc_advn_ale), (MODE(0) | PULLDOWN_EN)}, + {OFFSET(gpmc_be0n_cle), (MODE(0) | PULLDOWN_EN)}, + {-1}, +}; +#endif + +void enable_uart0_pin_mux(void) +{ + configure_module_pin_mux(uart0_pin_mux); +} + +void enable_i2c0_pin_mux(void) +{ + configure_module_pin_mux(i2c0_pin_mux); +} + +void enable_board_pin_mux(void) +{ +#ifdef CONFIG_NAND + configure_module_pin_mux(nand_pin_mux); +#endif + configure_module_pin_mux(adc_voltages_en); + configure_module_pin_mux(asp_power_en); + configure_module_pin_mux(switch_off_3v6_pin_mux); +} diff --git a/configs/am335x_guardian_defconfig b/configs/am335x_guardian_defconfig new file mode 100644 index 0000000000..c25a1a9327 --- /dev/null +++ b/configs/am335x_guardian_defconfig @@ -0,0 +1,90 @@ +CONFIG_ARM=y +CONFIG_ARCH_OMAP2PLUS=y +CONFIG_SPL_GPIO_SUPPORT=y +CONFIG_SPL_LIBCOMMON_SUPPORT=y +CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_AM33XX=y +CONFIG_TARGET_AM335X_GUARDIAN=y +CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_DRIVERS_MISC_SUPPORT=y +CONFIG_SPL=y +CONFIG_SPL_LIBDISK_SUPPORT=y +CONFIG_DISTRO_DEFAULTS=y +CONFIG_BOOTSTAGE_STASH_ADDR=0x0 +CONFIG_CONSOLE_MUX=y +CONFIG_SYS_CONSOLE_INFO_QUIET=y +CONFIG_VERSION_VARIABLE=y +CONFIG_ARCH_MISC_INIT=y +# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set +CONFIG_SPL_SEPARATE_BSS=y +CONFIG_SPL_ENV_SUPPORT=y +CONFIG_SPL_ETH_SUPPORT=y +CONFIG_SPL_I2C_SUPPORT=y +CONFIG_SPL_MUSB_NEW_SUPPORT=y +CONFIG_SPL_NET_SUPPORT=y +CONFIG_SPL_NET_VCI_STRING="Guardian U-Boot SPL" +CONFIG_SPL_POWER_SUPPORT=y +CONFIG_SPL_USB_GADGET=y +CONFIG_SPL_USB_ETHER=y +CONFIG_SPL_WATCHDOG_SUPPORT=y +CONFIG_SPL_YMODEM_SUPPORT=y +CONFIG_AUTOBOOT_KEYED=y +CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n" +CONFIG_AUTOBOOT_DELAY_STR="d" +CONFIG_AUTOBOOT_STOP_STR=" " +CONFIG_CMD_SPL=y +CONFIG_CMD_SPL_NAND_OFS=0x0 +CONFIG_CMD_ASKENV=y +# CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_MTD=y +CONFIG_CMD_NAND=y +CONFIG_CMD_USB=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_EXT4_WRITE=y +CONFIG_CMD_MTDPARTS=y +CONFIG_MTDPARTS_DEFAULT="mtdparts=nand.0:256k(SPL),256k(SPL.backup1),256k(SPL.backup2),256k(SPL.backup3),1m(u-boot),1m(u-boot.backup1),256k(u-boot-env),256k(u-boot-env.backup1),-(UBI)" +CONFIG_CMD_UBI=y +# CONFIG_SPL_DOS_PARTITION is not set +# CONFIG_ISO_PARTITION is not set +# CONFIG_SPL_EFI_PARTITION is not set +CONFIG_OF_CONTROL=y +CONFIG_SPL_OF_CONTROL=y +CONFIG_DEFAULT_DEVICE_TREE="am335x-guardian" +CONFIG_ENV_IS_IN_NAND=y +CONFIG_SPL_ENV_IS_NOWHERE=y +CONFIG_SPL_DM=y +CONFIG_BOOTCOUNT_LIMIT=y +CONFIG_BOOTCOUNT_ENV=y +CONFIG_MISC=y +CONFIG_DM_MMC=y +CONFIG_MMC_OMAP_HS=y +CONFIG_MTD=y +CONFIG_NAND=y +CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y +CONFIG_SYS_NAND_U_BOOT_OFFS=0x100000 +CONFIG_SYS_NAND_U_BOOT_OFFS_REDUND=0x200000 +CONFIG_MTD_UBI_FASTMAP=y +CONFIG_PHYLIB=y +CONFIG_DM_ETH=y +CONFIG_PHY=y +CONFIG_NOP_PHY=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_SINGLE=y +CONFIG_USB=y +CONFIG_DM_USB_GADGET=y +CONFIG_SPL_DM_USB_GADGET=y +CONFIG_USB_MUSB_HOST=y +CONFIG_USB_MUSB_GADGET=y +CONFIG_USB_MUSB_TI=y +CONFIG_USB_MUSB_DSPS=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments" +CONFIG_USB_GADGET_VENDOR_NUM=0x0451 +CONFIG_USB_GADGET_PRODUCT_NUM=0xd022 +CONFIG_USB_ETHER=y +CONFIG_FAT_WRITE=y diff --git a/include/configs/am335x_guardian.h b/include/configs/am335x_guardian.h new file mode 100644 index 0000000000..8bde198313 --- /dev/null +++ b/include/configs/am335x_guardian.h @@ -0,0 +1,111 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * am335x_guardian_.h + * + * Copyright (C) 2018 Robert Bosch Power Tools GmbH + * Copyright (C) 2018 sjoerd Simons sjoerd.simons@collabora.co.uk + * + */ + +#ifndef __CONFIG_AM335X_GUARDIAN_H +#define __CONFIG_AM335X_GUARDIAN_H + +#include <configs/ti_am335x_common.h> + +#ifndef CONFIG_SPL_BUILD +#define CONFIG_TIMESTAMP +#endif + +/* Clock Defines */ +#define V_OSCK 24000000 /* Clock output from T2 */ +#define V_SCLK (V_OSCK) + +#ifndef CONFIG_SPL_BUILD + +#define MEM_LAYOUT_ENV_SETTINGS \ + "scriptaddr=0x80000000\0" \ + "pxefile_addr_r=0x80100000\0" \ + "kernel_addr_r=0x82000000\0" \ + "fdt_addr_r=0x88000000\0" \ + "ramdisk_addr_r=0x88080000\0" \ + +#define BOOT_TARGET_DEVICES(func) \ + func(MMC, mmc, 0) \ + func(UBIFS, ubifs, 0) \ + func(PXE, pxe, na) \ + func(DHCP, dhcp, na) + +#define AM335XX_BOARD_FDTFILE "fdtfile=" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" + +#include <config_distro_bootcmd.h> + +#define CONFIG_EXTRA_ENV_SETTINGS \ + AM335XX_BOARD_FDTFILE \ + MEM_LAYOUT_ENV_SETTINGS \ + BOOTENV \ + "bootlimit=3\0" \ + "altbootcmd=" \ + "setenv boot_config "extlinux-rollback.conf"; " \ + "run distro_bootcmd\0" + +#endif /* CONFIG_SPL_BUILD */ + +/* NS16550 Configuration */ +#define CONFIG_SYS_NS16550_COM1 0x44e09000 /* UART0 */ +#define CONFIG_SYS_NS16550_COM2 0x48022000 /* UART1 */ +#define CONFIG_SYS_NS16550_COM3 0x48024000 /* UART2 */ +#define CONFIG_SYS_NS16550_COM4 0x481a6000 /* UART3 */ +#define CONFIG_SYS_NS16550_COM5 0x481a8000 /* UART4 */ +#define CONFIG_SYS_NS16550_COM6 0x481aa000 /* UART5 */ + +/* PMIC support */ +#define CONFIG_POWER_TPS65217 + +/* Bootcount using the RTC block */ +#define CONFIG_SYS_BOOTCOUNT_LE + +#ifdef CONFIG_NAND +#define CONFIG_ENV_OFFSET 0x300000 +#define CONFIG_ENV_OFFSET_REDUND 0x340000 +#define CONFIG_ENV_SIZE 0x040000 + +#define CONFIG_SYS_NAND_5_ADDR_CYCLE +#define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \ + CONFIG_SYS_NAND_PAGE_SIZE) +#define CONFIG_SYS_NAND_PAGE_SIZE 4096 +#define CONFIG_SYS_NAND_OOBSIZE 256 +#define CONFIG_SYS_NAND_BLOCK_SIZE (256 * 1024) + +#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \ + 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, \ + 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, \ + 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, \ + 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, \ + 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, \ + 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, \ + 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, \ + 80, 81, 82, 83, 84, 85, 86, 87, 88, 89, \ + 90, 91, 92, 93, 94, 95, 96, 97, 98, 99, \ + 100, 101, 102, 103, 104, 105, 106, 107, 108, 109, \ + 110, 111, 112, 113, 114, 115, 116, 117, 118, 119, \ + 120, 121, 122, 123, 124, 125, 126, 127, 128, 129, \ + 130, 131, 132, 133, 134, 135, 136, 137, 138, 139, \ + 140, 141, 142, 143, 144, 145, 146, 147, 148, 149, \ + 150, 151, 152, 153, 154, 155, 156, 157, 158, 159, \ + 160, 161, 162, 163, 164, 165, 166, 167, 168, 169, \ + 170, 171, 172, 173, 174, 175, 176, 177, 178, 179, \ + 180, 181, 182, 183, 184, 185, 186, 187, 188, 189, \ + 190, 191, 192, 193, 194, 195, 196, 197, 198, 199, \ + 200, 201, 202, 203, 204, 205, 206, 207, 208, 209, \ + } +#define CONFIG_SYS_NAND_ECCSIZE 512 +#define CONFIG_SYS_NAND_ECCBYTES 26 +#define CONFIG_SYS_NAND_ONFI_DETECTION +#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH16_CODE_HW +#define MTDIDS_DEFAULT "nand0=nand.0" + +#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS + +#endif /* CONFIG_NAND */ + +#endif /* ! __CONFIG_AM335X_GUARDIAN_H */