From: Frieder Schrempf frieder.schrempf@kontron.de
In case we boot from SD card or eMMC, we also want to load the environment from the according boot device.
Signed-off-by: Frieder Schrempf frieder.schrempf@kontron.de --- board/kontron/sl-mx8mm/sl-mx8mm.c | 31 ++++++++++++++++++++++++++++++ configs/kontron-sl-mx8mm_defconfig | 1 + 2 files changed, 32 insertions(+)
diff --git a/board/kontron/sl-mx8mm/sl-mx8mm.c b/board/kontron/sl-mx8mm/sl-mx8mm.c index fea93278374..416c4cbb407 100644 --- a/board/kontron/sl-mx8mm/sl-mx8mm.c +++ b/board/kontron/sl-mx8mm/sl-mx8mm.c @@ -4,10 +4,13 @@ */
#include <asm/arch/imx-regs.h> +#include <asm/arch/sys_proto.h> #include <asm/global_data.h> #include <asm/io.h> +#include <asm/mach-imx/boot_mode.h> #include <efi.h> #include <efi_loader.h> +#include <env_internal.h> #include <fdt_support.h> #include <linux/errno.h> #include <linux/kernel.h> @@ -117,3 +120,31 @@ int board_init(void) { return 0; } + +enum env_location env_get_location(enum env_operation op, int prio) +{ + enum boot_device boot_dev = get_boot_device(); + + if (prio) + return ENVL_UNKNOWN; + + /* + * Make sure that the environment is loaded from + * the MMC if we are running from SD card or eMMC. + */ + if (CONFIG_IS_ENABLED(ENV_IS_IN_MMC) && + (boot_dev == SD1_BOOT || boot_dev == SD2_BOOT)) + return ENVL_MMC; + + if (CONFIG_IS_ENABLED(ENV_IS_IN_SPI_FLASH)) + return ENVL_SPI_FLASH; + + return ENVL_NOWHERE; +} + +#if defined(CONFIG_ENV_IS_IN_MMC) +int board_mmc_get_env_dev(int devno) +{ + return devno; +} +#endif diff --git a/configs/kontron-sl-mx8mm_defconfig b/configs/kontron-sl-mx8mm_defconfig index 064f7d0caf6..e6b5c8f800a 100644 --- a/configs/kontron-sl-mx8mm_defconfig +++ b/configs/kontron-sl-mx8mm_defconfig @@ -69,6 +69,7 @@ CONFIG_CMD_EXT4_WRITE=y CONFIG_MTDPARTS_DEFAULT="mtdparts=spi0.0:320k(spl),1024k(u-boot),64k(env),64k(env_redundant)" CONFIG_OF_CONTROL=y CONFIG_SPL_OF_CONTROL=y +CONFIG_ENV_IS_IN_MMC=y CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_SYS_REDUNDAND_ENVIRONMENT=y CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y