Add board support for ICnova A20 SomPi compute module on ICnova ADB4006 development board.
Specification: SoM - Processor: Allwinner A20 Cortex-A7 Dual Core at 1GHz - 512MB DDR3 RAM - Fast Ethernet (Phy: Realtek RTL8201CP) ADB4006 - I2C - 2x USB 2.0 - 1x Fast Ethernet port - 1x SATA - 2x buttons (PWRON, Boot) - 2x LEDS - serial console - HDMI - µSD-Card slot - Audio Line-In / Line-Out - GPIO pinheaders
https://wiki.in-circuit.de/index.php5?title=ICnova_ADB4006 https://wiki.in-circuit.de/index.php5?title=ICnova_A20_SODIMM
changes in v2: - rebase on v2023.07-rc2 - remove pin defines from defconfig - get dts reviewed on the linux mailing list and scheduled for kernel 6.5 [1]
[1] https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux.git commit de2bdfb7f79d5c655eb056d459e02be2c7f13c8b
Signed-off-by: Ludwig Kormann ludwig.kormann@ict42.de --- arch/arm/dts/Makefile | 1 + arch/arm/dts/sun7i-a20-icnova-a20-adb4006.dts | 137 ++++++++++++++++++ arch/arm/dts/sun7i-a20-icnova-a20.dtsi | 62 ++++++++ board/sunxi/MAINTAINERS | 5 + configs/icnova-a20-adb4006_defconfig | 20 +++ 5 files changed, 225 insertions(+) create mode 100644 arch/arm/dts/sun7i-a20-icnova-a20-adb4006.dts create mode 100644 arch/arm/dts/sun7i-a20-icnova-a20.dtsi create mode 100644 configs/icnova-a20-adb4006_defconfig
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 935b2f1517..0b0636a532 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -631,6 +631,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \ sun7i-a20-haoyu-marsboard.dtb \ sun7i-a20-hummingbird.dtb \ sun7i-a20-i12-tvbox.dtb \ + sun7i-a20-icnova-a20-adb4006.dtb \ sun7i-a20-icnova-swac.dtb \ sun7i-a20-itead-ibox.dtb \ sun7i-a20-lamobo-r1.dtb \ diff --git a/arch/arm/dts/sun7i-a20-icnova-a20-adb4006.dts b/arch/arm/dts/sun7i-a20-icnova-a20-adb4006.dts new file mode 100644 index 0000000000..577ead1d02 --- /dev/null +++ b/arch/arm/dts/sun7i-a20-icnova-a20-adb4006.dts @@ -0,0 +1,137 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// Copyright (C) 2023 In-Circuit GmbH + +/dts-v1/; + +#include "sun7i-a20-icnova-a20.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> + +/ { + model = "In-Circuit ICnova A20 ADB4006"; + compatible = "incircuit,icnova-a20-adb4006", "incircuit,icnova-a20", + "allwinner,sun7i-a20"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-0 { + function = LED_FUNCTION_POWER; + color = <LED_COLOR_ID_YELLOW>; + gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>; /* PH21 */ + default-state = "on"; + }; + + led-1 { + function = LED_FUNCTION_HEARTBEAT; + color = <LED_COLOR_ID_RED>; + gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; /* PH20 */ + linux,default-trigger = "heartbeat"; + }; + }; +}; + +&ahci { + target-supply = <®_ahci_5v>; + status = "okay"; +}; + +&codec { + status = "okay"; +}; + +&de { + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&mmc0 { + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&otg_sram { + status = "okay"; +}; + +®_ahci_5v { + status = "okay"; +}; + +&ac_power_supply { + status = "okay"; +}; + +®_usb1_vbus { + status = "okay"; +}; + +®_usb2_vbus { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pb_pins>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usbphy { + usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; diff --git a/arch/arm/dts/sun7i-a20-icnova-a20.dtsi b/arch/arm/dts/sun7i-a20-icnova-a20.dtsi new file mode 100644 index 0000000000..46616c6bc8 --- /dev/null +++ b/arch/arm/dts/sun7i-a20-icnova-a20.dtsi @@ -0,0 +1,62 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// Copyright (C) 2023 In-Circuit GmbH + +#include "sun7i-a20.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/interrupt-controller/irq.h> + +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_mii_pins>; + phy-handle = <&phy1>; + phy-mode = "mii"; + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + axp209: pmic@34 { + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&gmac_mdio { + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +#include "axp209.dtsi" + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-int-dll"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS index 80e3f4be4b..de2d2335c9 100644 --- a/board/sunxi/MAINTAINERS +++ b/board/sunxi/MAINTAINERS @@ -231,6 +231,11 @@ M: Stefan Roese sr@denx.de S: Maintained F: configs/icnova-a20-swac_defconfig
+ICnova-A20-ADB4006 BOARD +M: Ludwig Kormann ludwig.kormann@ict42.de +S: Maintained +F: configs/icnova-a20-adb4006_defconfig + ITEAD IBOX BOARD M: Marcus Cooper codekipper@gmail.com S: Maintained diff --git a/configs/icnova-a20-adb4006_defconfig b/configs/icnova-a20-adb4006_defconfig new file mode 100644 index 0000000000..f70ffe45ab --- /dev/null +++ b/configs/icnova-a20-adb4006_defconfig @@ -0,0 +1,20 @@ +CONFIG_ARM=y +CONFIG_ARCH_SUNXI=y +CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-icnova-a20-adb4006" +CONFIG_SPL=y +CONFIG_MACH_SUN7I=y +CONFIG_DRAM_CLK=384 +CONFIG_AHCI=y +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_I2C=y +CONFIG_SCSI_AHCI=y +CONFIG_SYS_I2C_MVTWSI=y +CONFIG_SYS_I2C_SLAVE=0x7f +CONFIG_SYS_I2C_SPEED=400000 +CONFIG_ETH_DESIGNWARE=y +CONFIG_MII=y +CONFIG_SUN7I_GMAC=y +CONFIG_AXP_ALDO4_VOLT=2800 +CONFIG_SCSI=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_OHCI_HCD=y