Dear Peter Tyser,
In message 1288156533.1971.6.camel@ptyser-laptop you wrote:
Can you send the entire bootup output? The code is based on Freescale reference boards, eg the mpc8568mds, so I'd guess the problem is not tqm85xx-specific.
Sure. Here it is:
U-Boot 2010.09-00558-g79e6313 (Oct 26 2010 - 21:31:41)
CPU: 8555E, Version: 1.1, (0x80790011) Core: Unknown, Version: 2.0, (0x80200020) Clock Configuration: CPU0:833.333 MHz, CCB:333.333 MHz, DDR:166.667 MHz (333.333 MT/s data rate), LBC:41.667 MHz CPM: 333.333 MHz L1: D-cache 32 kB enabled I-cache 32 kB enabled Board: TQM8555, serial# ABC0555 casl=25 I2C: ready DRAM: 128 MiB FLASH: 128 MiB L2: 256 KB already enabled
PCI1: 32 bit, 33 MHz, sync, host, arbiter Scanning PCI bus 00 PCIE1 on bus 00 - 00 PCI-X will only work at 66 MHz In: serial Out: serial Err: serial DTT: 1 is 41 C Net: FCC1, TSEC0 [PRIME], TSEC1 PS/2: No device found Kbd: reset failed, no ACK
Type run flash_nfs to mount root filesystem over NFS
Hit any key to stop autoboot: 0 =>
Please also note the "Core: Unknown" which is new.
Best regards,
Wolfgang Denk