Re: [U-Boot] [PATCH RFC 5/5] imx: mx6ul: Add initial board support for Engicam GEAM6UL

Hi Peng,

On Sat, Sep 3, 2016 at 3:38 PM, Peng Fan van.freenix@gmail.com wrote:

Hi Jagan,

On Sat, Sep 03, 2016 at 01:52:57PM +0530, Jagan Teki wrote:

...

i.MX6UL GEA M6UL modules are system on module solutions manufactured by Engicam with following characteristics: Processor NXP i.MX 6UltraLite MCIMX6G2, 528 MHz RAM 128MB, 16-bit DDR3 NAND SLC 256MB Power supply Single 5V MAX LCD RES up to WXGA, 1366x768

Cc: Stefano Babic sbabic@denx.de Cc: Peng Fan peng.fan@nxp.com Cc: Michael Trimarchi michael@amarulasolutions.com Signed-off-by: Jagan Teki jagan@amarulasolutions.com

---

arch/arm/cpu/armv7/mx6/Kconfig | 6 ++++++ board/freescale/mx6ul/Kconfig | 2 +- board/freescale/mx6ul/MAINTAINERS | 5 +++++ board/freescale/mx6ul/board.c | 4 +++- configs/mx6ul_geam_kit_defconfig | 11 +++++++++++ include/configs/mx6ul.h | 1 + 6 files changed, 27 insertions(+), 2 deletions(-) create mode 100644 configs/mx6ul_geam_kit_defconfig

diff --git a/arch/arm/cpu/armv7/mx6/Kconfig b/arch/arm/cpu/armv7/mx6/Kconfig index 0c1bc78..d861ded 100644 --- a/arch/arm/cpu/armv7/mx6/Kconfig +++ b/arch/arm/cpu/armv7/mx6/Kconfig @@ -129,6 +129,12 @@ config TARGET_MX6UL_14X14_EVK select DM_THERMAL select SUPPORT_SPL

+config TARGET_MX6UL_GEAM_KIT

•  bool "mx6ul_geam_kit"
  

•  select MX6UL
  

•  select DM
  

•  select DM_THERMAL
  

config TARGET_NITROGEN6X bool "nitrogen6x"

diff --git a/board/freescale/mx6ul/Kconfig b/board/freescale/mx6ul/Kconfig index f97b905..d902cd0 100644 --- a/board/freescale/mx6ul/Kconfig +++ b/board/freescale/mx6ul/Kconfig @@ -1,4 +1,4 @@ -if TARGET_MX6UL_14X14_EVK || TARGET_MX6UL_9X9_EVK +if TARGET_MX6UL_14X14_EVK || TARGET_MX6UL_9X9_EVK || TARGET_MX6UL_GEAM_KIT

config SYS_BOARD default "mx6ul" diff --git a/board/freescale/mx6ul/MAINTAINERS b/board/freescale/mx6ul/MAINTAINERS index 20caeee..3265858 100644 --- a/board/freescale/mx6ul/MAINTAINERS +++ b/board/freescale/mx6ul/MAINTAINERS @@ -5,3 +5,8 @@ F: board/freescale/mx6ul/ F: include/configs/mx6ul.h F: configs/mx6ul_14x14_evk_defconfig F: configs/mx6ul_9x9_evk_defconfig

+Engicam GEAM6UL BOARD +M: Jagan Teki jagan@amarulasolutions.com +S: Maintained +F: configs/mx6ul_geam_kit_defconfig diff --git a/board/freescale/mx6ul/board.c b/board/freescale/mx6ul/board.c index 66d6795..f4e35bd 100644 --- a/board/freescale/mx6ul/board.c +++ b/board/freescale/mx6ul/board.c @@ -693,8 +693,10 @@ int checkboard(void) { if (is_mx6ul_9x9_evk()) puts("Board: MX6UL 9x9 EVK\n");

•  else
  

•  else if (is_mx6ul_14x14_evk())
          puts("Board: MX6UL 14x14 EVK\n");
  

•  else
  

•          puts("Board: MX6UL GEA KIT\n");
  
  return 0;
  

} diff --git a/configs/mx6ul_geam_kit_defconfig b/configs/mx6ul_geam_kit_defconfig new file mode 100644 index 0000000..b26f17b --- /dev/null +++ b/configs/mx6ul_geam_kit_defconfig @@ -0,0 +1,11 @@ +CONFIG_ARM=y +CONFIG_ARCH_MX6=y +CONFIG_TARGET_MX6UL_GEAM_KIT=y +CONFIG_HUSH_PARSER=y +CONFIG_SYS_PROMPT="geam6ul> " +CONFIG_AUTO_COMPLETE=y +CONFIG_SYS_MAXARGS=32 +CONFIG_BOOTDELAY=3 +CONFIG_BOARD_EARLY_INIT_F=y +CONFIG_BOARD_LATE_INIT=y +# CONFIG_CMD_IMLS is not set

I think you missed ddr script settings, SPL or DCD?

True - I will update the code once I tested on board and the reason for sending this series earlier is to make an approval of existing file name changes. Will that be OK?

Jagan.