Steve Sakoman wrote:
On Sat, Nov 7, 2009 at 10:15 AM, Paulraj, Sandeep s-paulraj@ti.com wrote:
Introduce Micron DDR timings and provide CONFIG_OMAP3_INFINEON_DDR and CONFIG_OMAP3_MICRON_DDR config options to allow for platform files to setup their timings as per the type of DDR selected
Reported-by: Steve Sakoman in
http://www.nabble.com/forum/Permalink.jtp?root=25779518&post=25959734&am...
=y
Signed-off-by: Nishanth Menon nm@ti.com
include/asm-arm/arch-omap3/mem.h | 88
++++++++++++++++++++++++++++++---
include/configs/devkit8000.h | 3 + include/configs/omap3_beagle.h | 3 + include/configs/omap3_evm.h | 3 + include/configs/omap3_overo.h | 3 + include/configs/omap3_pandora.h | 3 + include/configs/omap3_sdp3430.h | 3 + include/configs/omap3_zoom1.h | 3 + include/configs/omap3_zoom2.h | 3 + 9 files changed, 94 insertions(+), 18 deletions(-)
Pushed to u-boot-ti/next
I think this series from Nishanth needs some runtime tests. I believe Steve had some issues with his EVM not booting everytime due
to issues with DDR init.
Thanks, Sandeep
Maybe it should go on the testing branch?
I will give zoom2 a try..
Tom
Nishanth has already tried on SDP 3430. I think the board that needs to be tried is overo.
Correct, it was Overo, though I suspect Beagle might have the same issue since they use the same Micron POP memory. I'll try to test this weekend.
Steve
I can try that too.
Did you see the problem on warm or cold booting?
Tom