Hi,
I'm booting a newly compiled u-boot-1.1.4 image on my MPC8540, and it doesn't work. when i debugged i found in lib_ppc/board.c
for (cmdtp = &__u_boot_cmd_start; cmdtp != &__u_boot_cmd_end; cmdtp++)
&__u_boot_cmd_start=0fff3750
&__u_boot_cmd_end =0fff43b8 and cmdtp is encremanted as 0x18 each times..but it is not matching with u_boot_cmd_end so loop goes on until ffffffff and hangs.. what could be the problem.. can anyone plz help me to proceed.. Thanks Revathy
Wolfgang Denk wrote:
In message 456596D2.3000306@gdatech.co.in you wrote:
I'm booting a newly compiled u-boot-1.1.4 image on my MPC8540, and it doesn't work. It hangs after this..
...
On debugging , " In relocating the command table", *for* loop is going on infinite loop in lib/ppc/board.c.
Please use current code. It makes little sense to hunt down problems with such old code.
Best regards,
Wolfgang Denk