Freescale (NXP) boards have lots of defconfig files per board. I used "imply PANIC_HANG" for them.
Signed-off-by: Masahiro Yamada yamada.masahiro@socionext.com ---
README | 10 --------- arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 3 +++ arch/powerpc/cpu/mpc85xx/Kconfig | 37 +++++++++++++++++++++++++++++++ configs/TWR-P1025_defconfig | 1 + configs/UCP1020_SPIFLASH_defconfig | 1 + configs/UCP1020_defconfig | 1 + configs/adp-ae3xx_defconfig | 1 + configs/qemu-ppce500_defconfig | 1 + configs/tricorder_defconfig | 1 + configs/tricorder_flash_defconfig | 1 + configs/uniphier_ld4_sld8_defconfig | 1 + configs/uniphier_v7_defconfig | 1 + configs/uniphier_v8_defconfig | 1 + configs/xpedite517x_defconfig | 1 + configs/xpedite520x_defconfig | 1 + configs/xpedite537x_defconfig | 1 + configs/xpedite550x_defconfig | 1 + include/configs/B4860QDS.h | 1 - include/configs/C29XPCIE.h | 1 - include/configs/MPC8536DS.h | 1 - include/configs/MPC8544DS.h | 1 - include/configs/MPC8572DS.h | 1 - include/configs/P1010RDB.h | 1 - include/configs/P1023RDB.h | 2 -- include/configs/P2041RDB.h | 1 - include/configs/T102xQDS.h | 1 - include/configs/T102xRDB.h | 1 - include/configs/T1040QDS.h | 1 - include/configs/T104xRDB.h | 1 - include/configs/T4240RDB.h | 1 - include/configs/UCP1020.h | 1 - include/configs/adp-ae3xx.h | 1 - include/configs/corenet_ds.h | 1 - include/configs/cyrus.h | 1 - include/configs/ls1012a_common.h | 1 - include/configs/ls1088a_common.h | 2 -- include/configs/ls2080a_common.h | 2 -- include/configs/p1_p2_rdb_pc.h | 1 - include/configs/p1_twr.h | 1 - include/configs/qemu-ppce500.h | 1 - include/configs/t4qds.h | 1 - include/configs/tricorder.h | 1 - include/configs/uniphier.h | 2 -- include/configs/xpedite517x.h | 1 - include/configs/xpedite520x.h | 1 - include/configs/xpedite537x.h | 1 - include/configs/xpedite550x.h | 1 - include/configs/xtfpga.h | 4 ---- lib/Kconfig | 10 +++++++++ 49 files changed, 64 insertions(+), 48 deletions(-)
diff --git a/README b/README index 7a4f342..650d13d 100644 --- a/README +++ b/README @@ -2168,16 +2168,6 @@ The following options need to be configured: currently only supports clearing the memory.
- Error Recovery: - CONFIG_PANIC_HANG - - Define this variable to stop the system in case of a - fatal error, so that you have to reset it manually. - This is probably NOT a good idea for an embedded - system where you want the system to reboot - automatically as fast as possible, but it may be - useful during development since you can try to debug - the conditions that lead to the situation. - CONFIG_NET_RETRY_COUNT
This variable defines the number of retries for diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig index 5daf79e..e866193 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig +++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig @@ -7,6 +7,7 @@ config ARCH_LS1012A select SYS_FSL_ERRATUM_A010315 select ARCH_EARLY_INIT_R select BOARD_EARLY_INIT_F + imply PANIC_HANG
config ARCH_LS1043A bool @@ -85,6 +86,7 @@ config ARCH_LS1088A select ARCH_EARLY_INIT_R select BOARD_EARLY_INIT_F imply SCSI + imply PANIC_HANG
config ARCH_LS2080A bool @@ -123,6 +125,7 @@ config ARCH_LS2080A select SYS_FSL_ERRATUM_A009203 select ARCH_EARLY_INIT_R select BOARD_EARLY_INIT_F + imply PANIC_HANG
config FSL_LSCH2 bool diff --git a/arch/powerpc/cpu/mpc85xx/Kconfig b/arch/powerpc/cpu/mpc85xx/Kconfig index 92187d3..91fcc43 100644 --- a/arch/powerpc/cpu/mpc85xx/Kconfig +++ b/arch/powerpc/cpu/mpc85xx/Kconfig @@ -29,6 +29,7 @@ config TARGET_B4420QDS select ARCH_B4420 select SUPPORT_SPL select PHYS_64BIT + imply PANIC_HANG
config TARGET_B4860QDS bool "Support B4860QDS" @@ -36,6 +37,7 @@ config TARGET_B4860QDS select BOARD_LATE_INIT if CHAIN_OF_TRUST select SUPPORT_SPL select PHYS_64BIT + imply PANIC_HANG
config TARGET_BSC9131RDB bool "Support BSC9131RDB" @@ -57,6 +59,7 @@ config TARGET_C29XPCIE select SUPPORT_SPL select SUPPORT_TPL select PHYS_64BIT + imply PANIC_HANG
config TARGET_P3041DS bool "Support P3041DS" @@ -64,6 +67,7 @@ config TARGET_P3041DS select ARCH_P3041 select BOARD_LATE_INIT if CHAIN_OF_TRUST imply CMD_SATA + imply PANIC_HANG
config TARGET_P4080DS bool "Support P4080DS" @@ -71,6 +75,7 @@ config TARGET_P4080DS select ARCH_P4080 select BOARD_LATE_INIT if CHAIN_OF_TRUST imply CMD_SATA + imply PANIC_HANG
config TARGET_P5020DS bool "Support P5020DS" @@ -78,6 +83,7 @@ config TARGET_P5020DS select ARCH_P5020 select BOARD_LATE_INIT if CHAIN_OF_TRUST imply CMD_SATA + imply PANIC_HANG
config TARGET_P5040DS bool "Support P5040DS" @@ -85,6 +91,7 @@ config TARGET_P5040DS select ARCH_P5040 select BOARD_LATE_INIT if CHAIN_OF_TRUST imply CMD_SATA + imply PANIC_HANG
config TARGET_MPC8536DS bool "Support MPC8536DS" @@ -92,6 +99,7 @@ config TARGET_MPC8536DS # Use DDR3 controller with DDR2 DIMMs on this board select SYS_FSL_DDRC_GEN3 imply CMD_SATA + imply PANIC_HANG
config TARGET_MPC8541CDS bool "Support MPC8541CDS" @@ -100,6 +108,7 @@ config TARGET_MPC8541CDS config TARGET_MPC8544DS bool "Support MPC8544DS" select ARCH_MPC8544 + imply PANIC_HANG
config TARGET_MPC8548CDS bool "Support MPC8548CDS" @@ -123,6 +132,7 @@ config TARGET_MPC8572DS # Use DDR3 controller with DDR2 DIMMs on this board select SYS_FSL_DDRC_GEN3 imply SCSI + imply PANIC_HANG
config TARGET_P1010RDB_PA bool "Support P1010RDB_PA" @@ -132,6 +142,7 @@ config TARGET_P1010RDB_PA select SUPPORT_TPL imply CMD_EEPROM imply CMD_SATA + imply PANIC_HANG
config TARGET_P1010RDB_PB bool "Support P1010RDB_PB" @@ -141,6 +152,7 @@ config TARGET_P1010RDB_PB select SUPPORT_TPL imply CMD_EEPROM imply CMD_SATA + imply PANIC_HANG
config TARGET_P1022DS bool "Support P1022DS" @@ -153,6 +165,7 @@ config TARGET_P1023RDB bool "Support P1023RDB" select ARCH_P1023 imply CMD_EEPROM + imply PANIC_HANG
config TARGET_P1020MBG bool "Support P1020MBG-PC" @@ -161,6 +174,7 @@ config TARGET_P1020MBG select ARCH_P1020 imply CMD_EEPROM imply CMD_SATA + imply PANIC_HANG
config TARGET_P1020RDB_PC bool "Support P1020RDB-PC" @@ -169,6 +183,7 @@ config TARGET_P1020RDB_PC select ARCH_P1020 imply CMD_EEPROM imply CMD_SATA + imply PANIC_HANG
config TARGET_P1020RDB_PD bool "Support P1020RDB-PD" @@ -177,6 +192,7 @@ config TARGET_P1020RDB_PD select ARCH_P1020 imply CMD_EEPROM imply CMD_SATA + imply PANIC_HANG
config TARGET_P1020UTM bool "Support P1020UTM" @@ -185,6 +201,7 @@ config TARGET_P1020UTM select ARCH_P1020 imply CMD_EEPROM imply CMD_SATA + imply PANIC_HANG
config TARGET_P1021RDB bool "Support P1021RDB" @@ -193,6 +210,7 @@ config TARGET_P1021RDB select ARCH_P1021 imply CMD_EEPROM imply CMD_SATA + imply PANIC_HANG
config TARGET_P1024RDB bool "Support P1024RDB" @@ -201,6 +219,7 @@ config TARGET_P1024RDB select ARCH_P1024 imply CMD_EEPROM imply CMD_SATA + imply PANIC_HANG
config TARGET_P1025RDB bool "Support P1025RDB" @@ -209,6 +228,7 @@ config TARGET_P1025RDB select ARCH_P1025 imply CMD_EEPROM imply CMD_SATA + imply PANIC_HANG
config TARGET_P2020RDB bool "Support P2020RDB-PC" @@ -217,6 +237,7 @@ config TARGET_P2020RDB select ARCH_P2020 imply CMD_EEPROM imply CMD_SATA + imply PANIC_HANG
config TARGET_P1_TWR bool "Support p1_twr" @@ -228,6 +249,7 @@ config TARGET_P2041RDB select BOARD_LATE_INIT if CHAIN_OF_TRUST select PHYS_64BIT imply CMD_SATA + imply PANIC_HANG
config TARGET_QEMU_PPCE500 bool "Support qemu-ppce500" @@ -242,6 +264,7 @@ config TARGET_T1024QDS select PHYS_64BIT imply CMD_EEPROM imply CMD_SATA + imply PANIC_HANG
config TARGET_T1023RDB bool "Support T1023RDB" @@ -250,6 +273,7 @@ config TARGET_T1023RDB select SUPPORT_SPL select PHYS_64BIT imply CMD_EEPROM + imply PANIC_HANG
config TARGET_T1024RDB bool "Support T1024RDB" @@ -258,6 +282,7 @@ config TARGET_T1024RDB select SUPPORT_SPL select PHYS_64BIT imply CMD_EEPROM + imply PANIC_HANG
config TARGET_T1040QDS bool "Support T1040QDS" @@ -266,6 +291,7 @@ config TARGET_T1040QDS select PHYS_64BIT imply CMD_EEPROM imply CMD_SATA + imply PANIC_HANG
config TARGET_T1040RDB bool "Support T1040RDB" @@ -274,6 +300,7 @@ config TARGET_T1040RDB select SUPPORT_SPL select PHYS_64BIT imply CMD_SATA + imply PANIC_HANG
config TARGET_T1040D4RDB bool "Support T1040D4RDB" @@ -282,6 +309,7 @@ config TARGET_T1040D4RDB select SUPPORT_SPL select PHYS_64BIT imply CMD_SATA + imply PANIC_HANG
config TARGET_T1042RDB bool "Support T1042RDB" @@ -290,6 +318,7 @@ config TARGET_T1042RDB select SUPPORT_SPL select PHYS_64BIT imply CMD_SATA + imply PANIC_HANG
config TARGET_T1042D4RDB bool "Support T1042D4RDB" @@ -298,6 +327,7 @@ config TARGET_T1042D4RDB select SUPPORT_SPL select PHYS_64BIT imply CMD_SATA + imply PANIC_HANG
config TARGET_T1042RDB_PI bool "Support T1042RDB_PI" @@ -306,6 +336,7 @@ config TARGET_T1042RDB_PI select SUPPORT_SPL select PHYS_64BIT imply CMD_SATA + imply PANIC_HANG
config TARGET_T2080QDS bool "Support T2080QDS" @@ -336,12 +367,14 @@ config TARGET_T4160QDS select SUPPORT_SPL select PHYS_64BIT imply CMD_SATA + imply PANIC_HANG
config TARGET_T4160RDB bool "Support T4160RDB" select ARCH_T4160 select SUPPORT_SPL select PHYS_64BIT + imply PANIC_HANG
config TARGET_T4240QDS bool "Support T4240QDS" @@ -350,6 +383,7 @@ config TARGET_T4240QDS select SUPPORT_SPL select PHYS_64BIT imply CMD_SATA + imply PANIC_HANG
config TARGET_T4240RDB bool "Support T4240RDB" @@ -357,6 +391,7 @@ config TARGET_T4240RDB select SUPPORT_SPL select PHYS_64BIT imply CMD_SATA + imply PANIC_HANG
config TARGET_CONTROLCENTERD bool "Support controlcenterd" @@ -392,11 +427,13 @@ config TARGET_CYRUS_P5020 bool "Support Varisys Cyrus P5020" select ARCH_P5020 select PHYS_64BIT + imply PANIC_HANG
config TARGET_CYRUS_P5040 bool "Support Varisys Cyrus P5040" select ARCH_P5040 select PHYS_64BIT + imply PANIC_HANG
endchoice
diff --git a/configs/TWR-P1025_defconfig b/configs/TWR-P1025_defconfig index 5dda2bb..45923db 100644 --- a/configs/TWR-P1025_defconfig +++ b/configs/TWR-P1025_defconfig @@ -34,4 +34,5 @@ CONFIG_SYS_NS16550=y CONFIG_FSL_ESPI=y CONFIG_USB=y CONFIG_USB_STORAGE=y +CONFIG_PANIC_HANG=y CONFIG_OF_LIBFDT=y diff --git a/configs/UCP1020_SPIFLASH_defconfig b/configs/UCP1020_SPIFLASH_defconfig index c8f2262..3c3e9fc 100644 --- a/configs/UCP1020_SPIFLASH_defconfig +++ b/configs/UCP1020_SPIFLASH_defconfig @@ -43,4 +43,5 @@ CONFIG_FSL_ESPI=y CONFIG_USB=y CONFIG_USB_STORAGE=y CONFIG_FS_CRAMFS=y +CONFIG_PANIC_HANG=y CONFIG_OF_LIBFDT=y diff --git a/configs/UCP1020_defconfig b/configs/UCP1020_defconfig index 0092e99..bd17e05 100644 --- a/configs/UCP1020_defconfig +++ b/configs/UCP1020_defconfig @@ -43,4 +43,5 @@ CONFIG_FSL_ESPI=y CONFIG_USB=y CONFIG_USB_STORAGE=y CONFIG_FS_CRAMFS=y +CONFIG_PANIC_HANG=y CONFIG_OF_LIBFDT=y diff --git a/configs/adp-ae3xx_defconfig b/configs/adp-ae3xx_defconfig index a3a40bf..3aaca55 100644 --- a/configs/adp-ae3xx_defconfig +++ b/configs/adp-ae3xx_defconfig @@ -36,3 +36,4 @@ CONFIG_DM_SPI=y CONFIG_NDS_AE3XX_SPI=y CONFIG_TIMER=y CONFIG_AE3XX_TIMER=y +CONFIG_PANIC_HANG=y diff --git a/configs/qemu-ppce500_defconfig b/configs/qemu-ppce500_defconfig index f1db0d0..9d27755 100644 --- a/configs/qemu-ppce500_defconfig +++ b/configs/qemu-ppce500_defconfig @@ -24,4 +24,5 @@ CONFIG_DOS_PARTITION=y CONFIG_NETDEVICES=y CONFIG_E1000=y CONFIG_SYS_NS16550=y +CONFIG_PANIC_HANG=y CONFIG_OF_LIBFDT=y diff --git a/configs/tricorder_defconfig b/configs/tricorder_defconfig index 0f6cccc..27a3b6e 100644 --- a/configs/tricorder_defconfig +++ b/configs/tricorder_defconfig @@ -40,4 +40,5 @@ CONFIG_NAND=y CONFIG_SPL_NAND_SIMPLE=y CONFIG_SYS_NS16550=y CONFIG_BCH=y +CONFIG_PANIC_HANG=y CONFIG_OF_LIBFDT=y diff --git a/configs/tricorder_flash_defconfig b/configs/tricorder_flash_defconfig index 7477b42..78afec0 100644 --- a/configs/tricorder_flash_defconfig +++ b/configs/tricorder_flash_defconfig @@ -39,4 +39,5 @@ CONFIG_NAND=y CONFIG_SPL_NAND_SIMPLE=y CONFIG_SYS_NS16550=y CONFIG_BCH=y +CONFIG_PANIC_HANG=y CONFIG_OF_LIBFDT=y diff --git a/configs/uniphier_ld4_sld8_defconfig b/configs/uniphier_ld4_sld8_defconfig index 3a991d7..9285cc9 100644 --- a/configs/uniphier_ld4_sld8_defconfig +++ b/configs/uniphier_ld4_sld8_defconfig @@ -52,3 +52,4 @@ CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_GENERIC=y CONFIG_USB_STORAGE=y +CONFIG_PANIC_HANG=y diff --git a/configs/uniphier_v7_defconfig b/configs/uniphier_v7_defconfig index b4b54c0..7ce5227 100644 --- a/configs/uniphier_v7_defconfig +++ b/configs/uniphier_v7_defconfig @@ -55,3 +55,4 @@ CONFIG_USB_EHCI_GENERIC=y CONFIG_USB_DWC3=y CONFIG_USB_DWC3_UNIPHIER=y CONFIG_USB_STORAGE=y +CONFIG_PANIC_HANG=y diff --git a/configs/uniphier_v8_defconfig b/configs/uniphier_v8_defconfig index bc4bbbf..b82c8de 100644 --- a/configs/uniphier_v8_defconfig +++ b/configs/uniphier_v8_defconfig @@ -52,3 +52,4 @@ CONFIG_USB_EHCI_GENERIC=y CONFIG_USB_DWC3=y CONFIG_USB_DWC3_UNIPHIER=y CONFIG_USB_STORAGE=y +CONFIG_PANIC_HANG=y diff --git a/configs/xpedite517x_defconfig b/configs/xpedite517x_defconfig index a2324c3..3773518 100644 --- a/configs/xpedite517x_defconfig +++ b/configs/xpedite517x_defconfig @@ -27,4 +27,5 @@ CONFIG_DS4510=y CONFIG_MTD_NOR_FLASH=y CONFIG_PHYLIB=y CONFIG_SYS_NS16550=y +CONFIG_PANIC_HANG=y CONFIG_OF_LIBFDT=y diff --git a/configs/xpedite520x_defconfig b/configs/xpedite520x_defconfig index 7518ef2..7fffaa8 100644 --- a/configs/xpedite520x_defconfig +++ b/configs/xpedite520x_defconfig @@ -28,4 +28,5 @@ CONFIG_CMD_PCA953X=y CONFIG_MTD_NOR_FLASH=y CONFIG_PHYLIB=y CONFIG_SYS_NS16550=y +CONFIG_PANIC_HANG=y CONFIG_OF_LIBFDT=y diff --git a/configs/xpedite537x_defconfig b/configs/xpedite537x_defconfig index ead06a7..223bc4c 100644 --- a/configs/xpedite537x_defconfig +++ b/configs/xpedite537x_defconfig @@ -30,4 +30,5 @@ CONFIG_DS4510=y CONFIG_MTD_NOR_FLASH=y CONFIG_PHYLIB=y CONFIG_SYS_NS16550=y +CONFIG_PANIC_HANG=y CONFIG_OF_LIBFDT=y diff --git a/configs/xpedite550x_defconfig b/configs/xpedite550x_defconfig index 80bc914..f3b9280 100644 --- a/configs/xpedite550x_defconfig +++ b/configs/xpedite550x_defconfig @@ -30,4 +30,5 @@ CONFIG_PHYLIB=y CONFIG_SYS_NS16550=y CONFIG_USB=y CONFIG_USB_STORAGE=y +CONFIG_PANIC_HANG=y CONFIG_OF_LIBFDT=y diff --git a/include/configs/B4860QDS.h b/include/configs/B4860QDS.h index 661bc8b..b1b6725 100644 --- a/include/configs/B4860QDS.h +++ b/include/configs/B4860QDS.h @@ -173,7 +173,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x00400000 #define CONFIG_SYS_ALT_MEMTEST -#define CONFIG_PANIC_HANG /* do not reset board on panic */
/* * Config the L3 Cache as L3 SRAM diff --git a/include/configs/C29XPCIE.h b/include/configs/C29XPCIE.h index 7e805ec..f9d8cc6 100644 --- a/include/configs/C29XPCIE.h +++ b/include/configs/C29XPCIE.h @@ -117,7 +117,6 @@
#define CONFIG_SYS_MEMTEST_START 0x00200000 #define CONFIG_SYS_MEMTEST_END 0x00400000 -#define CONFIG_PANIC_HANG
/* DDR Setup */ #define CONFIG_DDR_SPD diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h index 3319a6f..ad339f1 100644 --- a/include/configs/MPC8536DS.h +++ b/include/configs/MPC8536DS.h @@ -69,7 +69,6 @@
#define CONFIG_SYS_MEMTEST_START 0x00010000 /* skip exception vectors */ #define CONFIG_SYS_MEMTEST_END 0x1f000000 /* skip u-boot at top of RAM */ -#define CONFIG_PANIC_HANG /* do not reset board on panic */
/* * Config the L2 Cache as L2 SRAM diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h index 2aea892..8b8e1f5 100644 --- a/include/configs/MPC8544DS.h +++ b/include/configs/MPC8544DS.h @@ -46,7 +46,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x00400000 -#define CONFIG_PANIC_HANG /* do not reset board on panic */
#define CONFIG_SYS_CCSRBAR 0xe0000000 #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h index b277cdb..634a9e1 100644 --- a/include/configs/MPC8572DS.h +++ b/include/configs/MPC8572DS.h @@ -58,7 +58,6 @@
#define CONFIG_SYS_MEMTEST_START 0x00000000 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x7fffffff -#define CONFIG_PANIC_HANG /* do not reset board on panic */
/* * Config the L2 Cache as L2 SRAM diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h index cbc15ae..d50035d 100644 --- a/include/configs/P1010RDB.h +++ b/include/configs/P1010RDB.h @@ -215,7 +215,6 @@
#define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x1fffffff -#define CONFIG_PANIC_HANG /* do not reset board on panic */
/* DDR Setup */ #define CONFIG_SYS_DDR_RAW_TIMING diff --git a/include/configs/P1023RDB.h b/include/configs/P1023RDB.h index 1b78a4f..17ae6cf 100644 --- a/include/configs/P1023RDB.h +++ b/include/configs/P1023RDB.h @@ -52,8 +52,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_SYS_MEMTEST_START 0x01000000 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x02000000
-#define CONFIG_PANIC_HANG /* do not reset board on panic */ - /* Implement conversion of addresses in the LBC */ #define CONFIG_SYS_LBC_LBCR 0x00000000 #define CONFIG_SYS_LBC_LCRR LCRR_CLKDIV_8 diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h index 6008237..7e3a9f1 100644 --- a/include/configs/P2041RDB.h +++ b/include/configs/P2041RDB.h @@ -116,7 +116,6 @@ unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x00400000 #define CONFIG_SYS_ALT_MEMTEST -#define CONFIG_PANIC_HANG /* do not reset board on panic */
/* * Config the L3 Cache as L3 SRAM diff --git a/include/configs/T102xQDS.h b/include/configs/T102xQDS.h index 259e8a0..30632ca 100644 --- a/include/configs/T102xQDS.h +++ b/include/configs/T102xQDS.h @@ -196,7 +196,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x00400000 #define CONFIG_SYS_ALT_MEMTEST -#define CONFIG_PANIC_HANG /* do not reset board on panic */
/* * Config the L3 Cache as L3 SRAM diff --git a/include/configs/T102xRDB.h b/include/configs/T102xRDB.h index 7dee2f0..791c6ef 100644 --- a/include/configs/T102xRDB.h +++ b/include/configs/T102xRDB.h @@ -219,7 +219,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x00400000 #define CONFIG_SYS_ALT_MEMTEST -#define CONFIG_PANIC_HANG /* do not reset board on panic */
/* * Config the L3 Cache as L3 SRAM diff --git a/include/configs/T1040QDS.h b/include/configs/T1040QDS.h index c694e50..4e75a3f 100644 --- a/include/configs/T1040QDS.h +++ b/include/configs/T1040QDS.h @@ -127,7 +127,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x00400000 #define CONFIG_SYS_ALT_MEMTEST -#define CONFIG_PANIC_HANG /* do not reset board on panic */
/* * Config the L3 Cache as L3 SRAM diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h index 2dbeffd..27a1439 100644 --- a/include/configs/T104xRDB.h +++ b/include/configs/T104xRDB.h @@ -226,7 +226,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x00400000 #define CONFIG_SYS_ALT_MEMTEST -#define CONFIG_PANIC_HANG /* do not reset board on panic */
/* * Config the L3 Cache as L3 SRAM diff --git a/include/configs/T4240RDB.h b/include/configs/T4240RDB.h index 625130a..ad192fe 100644 --- a/include/configs/T4240RDB.h +++ b/include/configs/T4240RDB.h @@ -96,7 +96,6 @@ #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x00400000 #define CONFIG_SYS_ALT_MEMTEST -#define CONFIG_PANIC_HANG /* do not reset board on panic */
/* * Config the L3 Cache as L3 SRAM diff --git a/include/configs/UCP1020.h b/include/configs/UCP1020.h index 902abc4..a526f83 100644 --- a/include/configs/UCP1020.h +++ b/include/configs/UCP1020.h @@ -138,7 +138,6 @@
#define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x1fffffff -#define CONFIG_PANIC_HANG /* do not reset board on panic */
#define CONFIG_SYS_CCSRBAR 0xffe00000 #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR diff --git a/include/configs/adp-ae3xx.h b/include/configs/adp-ae3xx.h index 6946029..5a62960 100644 --- a/include/configs/adp-ae3xx.h +++ b/include/configs/adp-ae3xx.h @@ -21,7 +21,6 @@ #define CONFIG_SKIP_TRUNOFF_WATCHDOG
#define CONFIG_CMDLINE_EDITING -#define CONFIG_PANIC_HANG
#define CONFIG_ARCH_MAP_SYSMEM
diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h index 0dbf149..a463235 100644 --- a/include/configs/corenet_ds.h +++ b/include/configs/corenet_ds.h @@ -128,7 +128,6 @@ #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x00400000 #define CONFIG_SYS_ALT_MEMTEST -#define CONFIG_PANIC_HANG /* do not reset board on panic */
/* * Config the L3 Cache as L3 SRAM diff --git a/include/configs/cyrus.h b/include/configs/cyrus.h index 1b20d85..685bff1 100644 --- a/include/configs/cyrus.h +++ b/include/configs/cyrus.h @@ -89,7 +89,6 @@ #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x00400000 #define CONFIG_SYS_ALT_MEMTEST -#define CONFIG_PANIC_HANG /* do not reset board on panic */
/* * Config the L3 Cache as L3 SRAM diff --git a/include/configs/ls1012a_common.h b/include/configs/ls1012a_common.h index d2fa50a..e73d988 100644 --- a/include/configs/ls1012a_common.h +++ b/include/configs/ls1012a_common.h @@ -109,7 +109,6 @@ #define CONFIG_AUTO_COMPLETE #define CONFIG_SYS_MAXARGS 64 /* max command args */
-#define CONFIG_PANIC_HANG #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */
#include <asm/arch/soc.h> diff --git a/include/configs/ls1088a_common.h b/include/configs/ls1088a_common.h index 6b71d47..e543903 100644 --- a/include/configs/ls1088a_common.h +++ b/include/configs/ls1088a_common.h @@ -228,8 +228,6 @@ unsigned long long get_qixis_addr(void); #define CONFIG_AUTO_COMPLETE #define CONFIG_SYS_MAXARGS 64 /* max command args */
-#define CONFIG_PANIC_HANG /* do not reset board on panic */ - #ifdef CONFIG_SPL #define CONFIG_SPL_BSS_START_ADDR 0x80100000 #define CONFIG_SPL_BSS_MAX_SIZE 0x00100000 diff --git a/include/configs/ls2080a_common.h b/include/configs/ls2080a_common.h index f897869..ea74f4a 100644 --- a/include/configs/ls2080a_common.h +++ b/include/configs/ls2080a_common.h @@ -221,8 +221,6 @@ unsigned long long get_qixis_addr(void); #define CONFIG_AUTO_COMPLETE #define CONFIG_SYS_MAXARGS 64 /* max command args */
-#define CONFIG_PANIC_HANG /* do not reset board on panic */ - #define CONFIG_SPL_BSS_START_ADDR 0x80100000 #define CONFIG_SPL_BSS_MAX_SIZE 0x00100000 #define CONFIG_SPL_FRAMEWORK diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h index 1b665b2..ac2921a 100644 --- a/include/configs/p1_p2_rdb_pc.h +++ b/include/configs/p1_p2_rdb_pc.h @@ -272,7 +272,6 @@
#define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x1fffffff -#define CONFIG_PANIC_HANG /* do not reset board on panic */
#define CONFIG_SYS_CCSRBAR 0xffe00000 #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR diff --git a/include/configs/p1_twr.h b/include/configs/p1_twr.h index e969204..9792ba3 100644 --- a/include/configs/p1_twr.h +++ b/include/configs/p1_twr.h @@ -71,7 +71,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x1fffffff -#define CONFIG_PANIC_HANG /* do not reset board on panic */
#define CONFIG_SYS_CCSRBAR 0xffe00000 #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR diff --git a/include/configs/qemu-ppce500.h b/include/configs/qemu-ppce500.h index eb4cfae..8b78f08 100644 --- a/include/configs/qemu-ppce500.h +++ b/include/configs/qemu-ppce500.h @@ -31,7 +31,6 @@ #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x00400000 #define CONFIG_SYS_ALT_MEMTEST -#define CONFIG_PANIC_HANG /* do not reset board on panic */
/* Needed to fill the ccsrbar pointer */
diff --git a/include/configs/t4qds.h b/include/configs/t4qds.h index 4938f43..47b78a2 100644 --- a/include/configs/t4qds.h +++ b/include/configs/t4qds.h @@ -54,7 +54,6 @@ #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x00400000 #define CONFIG_SYS_ALT_MEMTEST -#define CONFIG_PANIC_HANG /* do not reset board on panic */
/* * Config the L3 Cache as L3 SRAM diff --git a/include/configs/tricorder.h b/include/configs/tricorder.h index d9ab91c..f892a57 100644 --- a/include/configs/tricorder.h +++ b/include/configs/tricorder.h @@ -90,7 +90,6 @@
/* hang() the board on panic() */ -#define CONFIG_PANIC_HANG
/* environment placement (for NAND), is different for FLASHCARD but does not * harm there */ diff --git a/include/configs/uniphier.h b/include/configs/uniphier.h index 6f4d67e..577dfca 100644 --- a/include/configs/uniphier.h +++ b/include/configs/uniphier.h @@ -223,8 +223,6 @@ /* for LD20; the last 64 byte is used for dynamic DDR PHY training */ #define CONFIG_SYS_MEM_TOP_HIDE 64
-#define CONFIG_PANIC_HANG - #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE)
/* only for SPL */ diff --git a/include/configs/xpedite517x.h b/include/configs/xpedite517x.h index beedc9e..4326984 100644 --- a/include/configs/xpedite517x.h +++ b/include/configs/xpedite517x.h @@ -487,7 +487,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ #define CONFIG_CMDLINE_EDITING 1 /* Command-line editing */ #define CONFIG_LOADADDR 0x1000000 /* default location for tftp and bootm */ -#define CONFIG_PANIC_HANG /* do not reset board on panic */ #define CONFIG_PREBOOT /* enable preboot variable */ #define CONFIG_INTEGRITY /* support booting INTEGRITY OS */
diff --git a/include/configs/xpedite520x.h b/include/configs/xpedite520x.h index f589d1d..5a56162 100644 --- a/include/configs/xpedite520x.h +++ b/include/configs/xpedite520x.h @@ -291,7 +291,6 @@ #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ #define CONFIG_AUTO_COMPLETE 1 /* add autocompletion support */ #define CONFIG_LOADADDR 0x1000000 /* default location for tftp and bootm */ -#define CONFIG_PANIC_HANG /* do not reset board on panic */ #define CONFIG_PREBOOT /* enable preboot variable */ #define CONFIG_INTEGRITY /* support booting INTEGRITY OS */ #define CONFIG_INTERRUPTS /* enable pci, srio, ddr interrupts */ diff --git a/include/configs/xpedite537x.h b/include/configs/xpedite537x.h index d217eb3..b262237 100644 --- a/include/configs/xpedite537x.h +++ b/include/configs/xpedite537x.h @@ -341,7 +341,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy); #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ #define CONFIG_AUTO_COMPLETE 1 /* add autocompletion support */ #define CONFIG_LOADADDR 0x1000000 /* default location for tftp and bootm */ -#define CONFIG_PANIC_HANG /* do not reset board on panic */ #define CONFIG_PREBOOT /* enable preboot variable */ #define CONFIG_INTEGRITY /* support booting INTEGRITY OS */
diff --git a/include/configs/xpedite550x.h b/include/configs/xpedite550x.h index 6c0981b..624e9a8 100644 --- a/include/configs/xpedite550x.h +++ b/include/configs/xpedite550x.h @@ -339,7 +339,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy); #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ #define CONFIG_AUTO_COMPLETE 1 /* add autocompletion support */ #define CONFIG_LOADADDR 0x1000000 /* default location for tftp and bootm */ -#define CONFIG_PANIC_HANG /* do not reset board on panic */ #define CONFIG_PREBOOT /* enable preboot variable */ #define CONFIG_INTEGRITY /* support booting INTEGRITY OS */
diff --git a/include/configs/xtfpga.h b/include/configs/xtfpga.h index 3050f17..3119f00 100644 --- a/include/configs/xtfpga.h +++ b/include/configs/xtfpga.h @@ -130,10 +130,6 @@ #define CONFIG_MX_CYCLIC #define CONFIG_SHOW_BOOT_PROGRESS
-#ifdef DEBUG -#define CONFIG_PANIC_HANG 1 /* Require manual reboot */ -#endif -
/*=========================================*/ /* FPGA Registers (board info and control) */ diff --git a/lib/Kconfig b/lib/Kconfig index 18663ba..ec5fe2b 100644 --- a/lib/Kconfig +++ b/lib/Kconfig @@ -45,6 +45,16 @@ config USE_TINY_PRINTF
The supported format specifiers are %c, %s, %u/%d and %x.
+config PANIC_HANG + bool "Do not reset the system on fatal error" + help + Define this option to stop the system in case of a fatal error, + so that you have to reset it manually. This is probably NOT a good + idea for an embedded system where you want the system to reboot + automatically as fast as possible, but it may be useful during + development since you can try to debug the conditions that lead to + the situation. + config REGEX bool "Enable regular expression support" default y if NET