In the draco CPU board family, etamin is a new variant with bigger flash and more RAM. Due to new flash that uses larger pages (4K) some changes are necessary because it impacts the MTD partition layout and the ubi mount parameters.
special here is: - adding MTD concat support for nand flashs - add UBI Fastmap support for the siemens boards - fix a bug in dfu/nand when erasing remaining blocks on ubi partitions. - nand on etamin uses eccstrength bch16, so support switch to bch16 also. - read the ecc type from the config in i2c eeprom, so no need to use a define.
$ ./tools/buildman/buildman arm -se boards.cfg is up to date. Nothing to do. Summary of current source for 561 boards (8 threads, 1 job per thread) arm: + Cubietruck omap3_logic omap3_overo gwventana +arm-linux-gnueabi-ld.bfd: u-boot-spl section `.data' will not fit in region `.sram' +arm-linux-gnueabi-ld.bfd: region `.sram' overflowed by 236 bytes +make[2]: *** [spl/u-boot-spl] Error 1 +make[1]: *** [spl/u-boot-spl] Error 2 +make: *** [sub-make] Error 2 +arm-linux-gnueabi-ld.bfd: region `.sram' overflowed by 944 bytes +arm-linux-gnueabi-ld.bfd: region `.sram' overflowed by 620 bytes +common/spl/spl_ext.c: In function 'spl_load_image_ext_os': +common/spl/spl_ext.c:125:20: error: 'CONFIG_SPL_FS_LOAD_ARGS_NAME' undeclared (first use in this function) +common/spl/spl_ext.c:125:20: note: each undeclared identifier is reported only once for each function it appears in +common/spl/spl_ext.c:139:4: error: 'CONFIG_SPL_FS_LOAD_KERNEL_NAME' undeclared (first use in this function) +make[3]: *** [spl/common/spl/spl_ext.o] Error 1 +make[2]: *** [spl/common/spl] Error 2 w+common/spl/spl_ext.c:140:1: warning: control reaches end of non-void function [-Wreturn-type] $
No new errors/warnings
- news for the v2 version: as Scott Wood posted a "mtd, nand sync with Linux v4.6" patchserie, I rebased this patchset to his series, so my patches are based on the patches:
[U-Boot,1/7] mtd: nand: Remove jz4740 driver http://patchwork.ozlabs.org/patch/627922/ [U-Boot,2/7] mtd: nand: Remove docg4 driver and palmtreo680 flashing tool http://patchwork.ozlabs.org/patch/627924/ [U-Boot,3/7] mtd: nand: Remove nand_info_t typedef http://patchwork.ozlabs.org/patch/627923/ [U-Boot,4/7] nand: Embed mtd_info in struct nand_chip http://patchwork.ozlabs.org/patch/627925/ [U-Boot,5/7] mtd: nand: Add+use mtd_to/from_nand and nand_get/set_controller_data http://patchwork.ozlabs.org/patch/627926/ [U-Boot,6/7] mtd: nand: Add page argument to write_page() etc. http://patchwork.ozlabs.org/patch/627927/ [U-Boot,7/7] mtd: nand: Sync with Linux v4.6 http://patchwork.ozlabs.org/patch/627928/
Last but not least, tbot results for the etamin module (UBI/UBIFS and a lot of DFU tests)
xeidos.ddns.net/tests/test_db_auslesen.php#42 http://xeidos.ddns.net/tbot/id_42/html_log.html
Changes in v2: - rebase to current mainline commit id: e4a94ce4ac77396b181663c0493c50bc2d5b9143 - add comments from Scott Wood: - correct spelling error "dettach" -> "detach" - use "oss@buserror.net" as email address for Scott - rebase to current mainline commit id: e4a94ce4ac77396b181663c0493c50bc2d5b9143 - add comments from Scott Wood: - move c_mtd_name from file scope to local - use nand_info instead mtd_nand_list - use oss@buserror.net as email address for Scott - rebase to current mainline commit id: e4a94ce4ac77396b181663c0493c50bc2d5b9143 and the "mtd: nand Sync with Linux v4.6" patches: [U-Boot,1/7] mtd: nand: Remove jz4740 driver http://patchwork.ozlabs.org/patch/627922/ [U-Boot,2/7] mtd: nand: Remove docg4 driver and palmtreo680 flashing tool http://patchwork.ozlabs.org/patch/627924/ [U-Boot,3/7] mtd: nand: Remove nand_info_t typedef http://patchwork.ozlabs.org/patch/627923/ [U-Boot,4/7] nand: Embed mtd_info in struct nand_chip http://patchwork.ozlabs.org/patch/627925/ [U-Boot,5/7] mtd: nand: Add+use mtd_to/from_nand and nand_get/set_controller_data http://patchwork.ozlabs.org/patch/627926/ [U-Boot,6/7] mtd: nand: Add page argument to write_page() etc. http://patchwork.ozlabs.org/patch/627927/ [U-Boot,7/7] mtd: nand: Sync with Linux v4.6 http://patchwork.ozlabs.org/patch/627928/ Series-changes: 3 - add comment from Scott Wood build an array for none NULL-devices. While at it move the nand mtd concat code into a seperate function. - rebase to "Prepare v2016.07-rc1" b104b3dc1dd90cdbf67ccf3c51b06e4f1592fe91 and the "mtd: nand Sync with Linux v4.6" patches: [U-Boot,1/7] mtd: nand: Remove jz4740 driver http://patchwork.ozlabs.org/patch/627922/ [U-Boot,2/7] mtd: nand: Remove docg4 driver and palmtreo680 flashing tool http://patchwork.ozlabs.org/patch/627924/ [U-Boot,3/7] mtd: nand: Remove nand_info_t typedef http://patchwork.ozlabs.org/patch/627923/ [U-Boot,4/7] nand: Embed mtd_info in struct nand_chip http://patchwork.ozlabs.org/patch/627925/ [U-Boot,5/7] mtd: nand: Add+use mtd_to/from_nand and nand_get/set_controller_data http://patchwork.ozlabs.org/patch/627926/ [U-Boot,6/7] mtd: nand: Add page argument to write_page() etc. http://patchwork.ozlabs.org/patch/627927/ [U-Boot,7/7] mtd: nand: Sync with Linux v4.6 http://patchwork.ozlabs.org/patch/627928/
Heiko Schocher (6): ubi: add new ubi command "ubi detach" nand: add nand mtd concat support mtd: nand: omap: allow to switch to BCH16 am335x, dxr2: get ECC sType from I2C eeprom dfu, nand, ubi: fix erasing after write finish siemens,am33x: add draco etamin board
Samuel Egli (1): siemens,am33x: add ubi fastmap support
arch/arm/Kconfig | 5 + arch/arm/cpu/armv7/omap3/board.c | 6 +- board/siemens/common/board.c | 4 + board/siemens/draco/Kconfig | 16 ++ board/siemens/draco/MAINTAINERS | 1 + board/siemens/draco/board.c | 84 ++++++++++- board/siemens/draco/mux.c | 2 +- cmd/ubi.c | 38 +++-- configs/etamin_defconfig | 17 +++ drivers/dfu/dfu_nand.c | 12 +- drivers/mtd/nand/nand.c | 41 ++++++ drivers/mtd/nand/omap_gpmc.c | 4 + include/configs/draco.h | 1 + include/configs/etamin.h | 261 +++++++++++++++++++++++++++++++++ include/configs/pxm2.h | 1 + include/configs/rastaban.h | 1 + include/configs/rut.h | 1 + include/configs/siemens-am33x-common.h | 7 +- include/configs/thuban.h | 1 + 19 files changed, 484 insertions(+), 19 deletions(-) create mode 100644 configs/etamin_defconfig create mode 100644 include/configs/etamin.h